JIKONG JK-B1A8S20P

Contents

JIKONG Smart BMS JK-B1A8S20P User Manual

Intelligent Active Balance Power Management System for 4S-8S Li-ion, Lifepo4, LTO Batteries

1. Product Overview

The JIKONG Smart BMS JK-B1A8S20P is an intelligent active balance battery management system designed for 4S-8S Li-ion, Lifepo4, and LTO battery configurations. It features a 200A continuous charge and discharge current and a 1A active balancing current, ensuring optimal battery performance and longevity. This Smart BMS offers comprehensive protection functions and supports various communication interfaces for advanced monitoring and control.

Key Features:

  • Battery Compatibility: 4S-8S Li-ion, Lifepo4, LTO batteries.
  • High Current Capacity: 200A continuous charge and discharge current.
  • Active Balancing: 1A active balance current for efficient cell voltage equalization.
  • Smart Functionality: Bluetooth connectivity for mobile app monitoring (iOS/Android/HarmonyOS) and PC software.
  • Comprehensive Protection: Overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection.
  • Versatile Application: Suitable for power BMS, energy storage BMS, and 3C digital BMS scenarios.
  • Robust Design: Fully aluminum alloy shell for superior heat dissipation and protection of electronic components.
JIKONG Smart BMS JK-B1A8S20P overview with scooter application

Figure 1: JIKONG Intelligent Active Balance Power Management System (BMS) in a typical application.

2. Package Contents

Please check the package carefully upon receipt to ensure all items are present and undamaged.

Packing list for JIKONG Smart BMS

Figure 2: JIKONG Smart BMS Packing List.

  • 1 x JIKONG Smart BMS Unit
  • 1 x Sampling Line (70cm long)
  • 1 x NTC Temperature Sensor (40cm long)
  • 1 x Switch (50cm long)

Optional Accessories (Sold Separately):

JIKONG BMS Accessories including displays, switch, RS485, and interface board

Figure 3: Optional JIKONG BMS Accessories.

  • 2.5 Inch Display
  • 4.3 Inch Touch Display
  • 3.2 Inch Display
  • Switch Key
  • RS485 Module
  • Interface Board

3. Setup and Wiring

Proper installation and wiring are crucial for the safe and efficient operation of your JIKONG Smart BMS. Please follow these instructions carefully.

General Wiring Steps:

  1. Connect all necessary cables to their respective terminals on the BMS.
  2. Insert the main cable harness into the BMS.
  3. Connect the B-line (battery negative) and P-line (power output negative) to the battery pack.

Wiring Diagram for 8-String Cells:

Wiring diagram for an 8-string battery configuration with JIKONG Smart BMS

Figure 4: Wiring method for an 8-string cell battery pack. Connect individual cell balance wires (1S-8S) to the BMS, then connect the main B- (total negative electrode) and P- (total positive electrode) terminals. The P- terminal connects to the load (motor, inverter) and charger.

Wiring Diagram for 4-String Cells:

Wiring diagram for a 4-string battery configuration with JIKONG Smart BMS

Figure 5: Wiring method for a 4-string cell battery pack. Similar to the 8-string setup, ensure correct connection of balance wires (1S-4S), B- (total negative electrode), and P- (total positive electrode) terminals to the load and charger.

BMS Interfaces:

JIKONG Smart BMS with labeled interfaces including NTC1, GPS, Display, and Sampling ports

Figure 6: BMS interfaces for connection of NTC temperature sensors, GPS (customized), display, and sampling lines.

  • NTC1: Temperature sensor input.
  • GPS (customized): Optional GPS module connection.
  • Display: Port for external display units.
  • Sampling: Connection for cell voltage sampling lines.
  • Other Interfaces: CAN, RS485, BT (Bluetooth), Soft Switch, SOC Indicator, Key Switch, Active Equalizer (refer to Figure 7).
Diagram showing various interfaces supported by JIKONG BMS: CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer

Figure 7: Rich interface options for the JIKONG BMS.

4. Operating Instructions

Active Balancing (Lossless Balancing):

The JIKONG Smart BMS utilizes active balancing technology to achieve voltage equalization across battery cells. This process involves energy transfer from cells with higher energy to those with lower energy, minimizing energy loss and extending battery lifespan. Active balancing operates continuously when a voltage difference above a set threshold is detected, whether the battery is charging, discharging, or idle.

Diagram illustrating active balancing process in a battery pack

Figure 8: Active Balancing mechanism.

Intelligent Interaction and Monitoring:

The BMS allows for intelligent interaction and easy operation through dedicated software and mobile applications.

  • PC Software: Adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance settings. It is recommended to read the internal parameters of the protection board before making changes.
  • Mobile App (JIKONG SMART BMS): Available for iOS, Android, and HarmonyOS. The app provides a clear overview of battery information including voltage, current, temperature, and number of strings. It supports multiple languages and can be easily set up.
Screenshot of JIKONG BMS PC software interface for intelligent interaction and parameter adjustment

Figure 9: PC software interface for intelligent interaction.

Screenshots of JIKONG mobile app, PC software, and home storage display showing multi-screen data connection

Figure 10: Multi-screen display options (Mobile App, PC Software, JIKONG Home Storage Display).

Protocol Docking:

The JIKONG Smart BMS is compatible with mainstream inverter communication protocols, allowing for seamless integration into various energy systems. Supported CAN protocols can be selected via the mobile app.

Mobile app screenshot showing CAN protocol selection and a list of supported protocols like Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, SRNE

Figure 11: Mobile app interface for CAN protocol selection and supported protocols.

Supported CAN Protocols include: Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, SRNE, and others.

5. Maintenance

To ensure the longevity and optimal performance of your JIKONG Smart BMS, consider the following maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a dry, soft cloth for cleaning.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges to prevent damage.
  • Software Updates: Check for and install any available firmware or software updates for the mobile app and PC software to benefit from improvements and bug fixes.

6. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, consider the following basic troubleshooting steps:

  • No Power/No Display:
    • Verify all power connections to the BMS and battery.
    • Check the main switch (if applicable) is in the ON position.
    • Ensure the display unit is correctly connected and powered.
  • Balancing Issues:
    • Confirm all cell voltage sampling lines are correctly and securely connected.
    • Check cell voltages via the app/software to identify specific problematic cells.
    • Ensure the active balancing function is enabled in the software settings.
  • Communication Problems (Bluetooth/RS485):
    • For Bluetooth, ensure the BMS is powered on and within range. Re-pair the device if necessary.
    • For RS485, check wiring and ensure correct protocol selection in the software.
  • Protection Triggered (Overcharge, Over-discharge, Overcurrent, Short Circuit):
    • Identify the specific protection that was triggered using the app/software diagnostics.
    • Address the root cause (e.g., reduce load, check charger settings, inspect for short circuits).
    • The BMS will typically reset automatically once the fault condition is removed, or may require a manual reset via the switch or software.

For more complex issues, refer to the detailed diagnostic information available through the JIKONG mobile app or PC software, or contact JIKONG customer support.

7. Specifications

The following table details the technical specifications for the JIKONG Smart BMS JK-B1A8S20P and related models.

Table of JIKONG Product Specifications for various BMS models

Figure 12: JIKONG Product Specifications.

Technical IndexJK-B1A8S10PJK-B1A8S20PJK-B2A8S20PJK-B2A8S30P
Number of Battery Strings (Li-ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (Lifepo4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.3mΩ
Continuous Discharge Current100A200A200A300A
Continuous Charge Current100A200A200A300A
Maximum Discharge Current (MAX 2min)200A300A300A400A
Over Charge Protection (ADJ)10-100A10-200A10-200A10-300A
Other Interfaces (Customized)RS485
Other Interfaces (Customized)CANBUS HEAT
Size/mm (L*W*H)153*87*17.6153*126*18153*126*17.6174.77*127.26*17.6
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1Pcs
Temp ProtectionYes
Short Circuit protectionYes
Coulomb counterYes
Bluetooth FunctionSupport for Android iOS

Note: The data tolerance range is ±2mm for dimensions.

Physical Dimensions:

Dimensions of JIKONG BMS model JK-B1A8S10P: 153.9mm length, 87mm width, 17.6mm height

Figure 13: Dimensions for JK-B1A8S10P (153.9mm x 87mm x 17.6mm).

Dimensions of JIKONG BMS model JK-B2A8S20P: 153mm length, 126mm width, 17.6mm height

Figure 14: Dimensions for JK-B2A8S20P (153mm x 126mm x 17.6mm).

Dimensions of JIKONG BMS model JK-B2A8S30P: 174.77mm length, 127.26mm width, 17.6mm height

Figure 15: Dimensions for JK-B2A8S30P (174.77mm x 127.26mm x 17.6mm).

8. User Tips

  • Verify Package Contents: Before starting installation, ensure all items listed in the 'Package Contents' section are present. If any accessories are missing, contact your vendor.
  • Double-Check Wiring: Always double-check all wiring connections, especially the balance leads and main power lines, before applying power to prevent damage to the BMS or battery pack.
  • Utilize the App/Software: Take full advantage of the JIKONG mobile app or PC software for real-time monitoring, parameter adjustment, and diagnostic information. This can help in proactive maintenance and quick troubleshooting.
  • Consult Diagrams: When wiring, always refer to the specific wiring diagrams provided for your battery string configuration (e.g., 4-string or 8-string) to ensure correct connections.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG customer service or refer to the official JIKONG website. The QR code on the BMS unit typically links to the official website (WWW.JK-BMS.COM) for support resources.

Please retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.