DayPlus Cordless Upright Stick Vacuum Cleaner

Introduction

Thank you for choosing the DayPlus Cordless Upright Stick Vacuum Cleaner. This 3-in-1 wireless handheld vacuum cleaner is designed for efficient cleaning of carpets, hard floors, and various surfaces in your home and car. Featuring a powerful brushless motor, two-speed regulation, and an efficient filtration system, it provides a convenient and thorough cleaning experience. Please read this manual carefully before use to ensure proper operation and maintenance.

Package Contents

Please check the package for the following items:

• 1 x Vacuum Cleaner Main Motor
• 1 or 2 x 3Ah Li-ion Battery (Removable)
• 1 x Instruction Manual
• 1 x Motorised Floor Brush
• 1 x Extension Pole
• 1 x 2-in-1 Short Brush Head
• 1 x Long Flat Nozzle
• 1 x HEPA Filter
• 1 x Charger
• 1 x Wall Mount

Setup

Assembly

1. Attach Extension Pole: Insert the extension pole into the main motor unit until it clicks securely into place.
2. Attach Floor Brush: Connect the motorised floor brush to the other end of the extension pole. Ensure it is firmly attached.
3. Install Battery: Slide the 3Ah Li-ion battery into the battery slot on the main motor unit until it locks.
4. Alternative Attachments: For handheld use, attach the 2-in-1 short brush head or the long flat nozzle directly to the main motor unit.

Charging the Battery

Before first use, fully charge the battery. The charging time is approximately 120 minutes.

1. Connect the charger to a power outlet (110-240V 50/60Hz).
2. Connect the charger cable to the battery. The battery can be charged while attached to the vacuum or separately.
3. The battery indicator lights will show the charging status.

Wall Mount Installation

The included wall mount allows for convenient storage. Choose a suitable location, mark the drilling points, and secure the mount to the wall using appropriate screws and anchors (not included).

Operating Instructions

Power On/Off and Suction Modes

1. Press the power button once to turn on the vacuum cleaner in Standard mode.
2. Press the power button a second time to switch to MAX suction mode for deeper cleaning.
3. Press the power button a third time to turn off the vacuum cleaner.

Using Different Brush Heads

The DayPlus vacuum cleaner comes with versatile attachments for various cleaning tasks:

• Motorised Floor Brush: Ideal for hardwood, low & mid-pile carpets, tiles, and marble floors. It features front LED lighting for visual cleaning in dark areas.
• Long Flat Nozzle: Perfect for reaching narrow gaps, corners, and tight spaces like between sofa cushions or car seats.
• 2-in-1 Short Brush: Suitable for upholstery, curtains, and delicate surfaces.

Maintenance

Emptying the Dustbin

To maintain optimal suction, empty the dustbin regularly, especially when the amount of garbage decreases, as suction force will automatically increase. Ensure the filter screen is correctly installed after cleaning.

1. Locate the 'one-click cleaning' button on the dustbin.
2. Press the button to release the bottom flap and empty the contents into a trash bin.
3. Close the flap securely until it clicks.

Cleaning the Filter System

The vacuum cleaner features a 5-layer filtration system with a HEPA filter. Regular cleaning of the filter is crucial for maintaining performance and air quality.

1. Twist and remove the dustbin from the main motor unit.
2. Carefully remove the HEPA filter and other filter components.
3. Tap the filter gently to remove loose dust. For thorough cleaning, rinse the HEPA filter under running water.
4. Ensure all filter components are completely dry before reassembling them into the dustbin. Do not use the vacuum with wet filters.
5. Reinstall the dustbin and filter components correctly.

Cleaning the Brush Roller

Hair and debris can get tangled in the brush roller. Regularly inspect and clean the brush roller to prevent blockages and maintain effective cleaning.

1. Turn off the vacuum cleaner and detach the motorised floor brush.
2. Unlock the brush roller cover (refer to the floor brush design for specific release mechanisms).
3. Remove the brush roller and use scissors or a brush to remove any tangled hair or debris.
4. Reinsert the brush roller and secure the cover.

Troubleshooting

If you encounter any issues with your DayPlus vacuum cleaner, please refer to the following common problems and solutions:

• Reduced Suction:
  • Check if the dustbin is full and empty it.
  • Inspect the HEPA filter and other filter components; clean or replace if clogged.
  • Ensure the brush roller is free from tangled hair or debris.
  • Check for any blockages in the extension pole or brush head.
  • Ensure the battery is sufficiently charged.
• Vacuum Not Turning On:
  • Ensure the battery is properly installed and fully charged.
  • Check if the battery is securely connected.
• Brush Roller Not Spinning:
  • Check for tangled hair or obstructions in the brush roller.
  • Ensure the brush head is correctly attached to the extension pole or main unit.
• Unusual Noise:
  • A certain level of noise is normal, especially in MAX mode.
  • Check for any foreign objects caught in the brush roller or air pathways.
  • Ensure all components are securely assembled.

If the problem persists, please contact customer support for assistance.

Specifications

User Tips

• Regular Cleaning: For optimal performance, regularly empty the dustbin and clean the HEPA filter and brush roller. This prevents loss of suction and maintains air quality.
• Battery Management: If you have two batteries, keep one charged as a backup for extended cleaning sessions.
• Noise Level: Be aware that the vacuum cleaner can be noisy, especially on the higher suction setting.
• Makita Battery Compatibility: Some users have reported compatibility with Makita 18V batteries. Please verify compatibility and safety before attempting to use third-party batteries, as this is not officially supported.
• Proper Assembly: Always ensure all parts are securely clicked into place during assembly to prevent damage during operation.

Warranty and Support

The manufacturer offers the following after-sales service:

• Product Faults: If the product has any fault within 60 days of purchase, you may contact the seller for a replacement.
• Repair Service: A repair service is provided for damage within 90 days of purchase (excluding damage caused by misuse).
• Missing Parts: If any pieces are missing from your package, contact the seller for replacement parts.
• Transit Damage: Any damage or missing items caused during transit will be replaced.

For any inquiries, missing parts, or service requests, please contact the seller directly through your purchase platform.