EZ P3 Pro / P3 PRO Turbo Wireless Tattoo Machine Pen

1. Product Overview

The EZ P3 Pro and P3 PRO Turbo are advanced wireless tattoo machine pens designed for professional tattoo artists. Featuring an OLED digital display, adjustable stroke length, and a powerful motor, these machines offer precision and convenience. The P3 Pro Turbo model provides enhanced power and stroke options.

Key Components:

• Power Pack: Houses the battery and control interface.
• OLED Digital Display: Shows Hertz (Hz), Voltage (V), Battery Percentage, and Timer.
• Stroke Adjustment Knob: Allows for precise adjustment of needle stroke.
• Motor: The coreless motor (P3 Pro) or external rotor brushless motor (P3 Pro Turbo) drives the needle.
• Type-C Port: For charging the device.
• Control Buttons: For power, voltage adjustment, and mode selection.

Image: EZ P3 Pro showing OLED Digital Display and control buttons.

Image: Various EZ P3 Pro models highlighting the stroke adjustment rings.

2. Setup

2.1 Charging the Device

Before first use, fully charge the device using the provided Battery Type-C Charging cable and power adapter. The OLED display will indicate charging status.

Image: Efficient charging and adequate working time details.

2.2 Needle Cartridge Installation

1. Ensure the machine is powered off.
2. Gently twist and remove the grip from the machine body.
3. Insert the desired needle cartridge into the machine.
4. Reattach the grip by twisting it back into place until secure.

2.3 Adjusting Needle Protrusion and Stroke Length

1. Needle Protrusion: Rotate the grip to adjust the needle protrusion (0 - 4.5 mm) to your desired length.
2. Stroke Length (P3 Pro): Rotate the stroke adjustment knob (located on the machine body) to select from six options: 2.0, 2.4, 2.8, 3.3, 3.7, 4.2mm.
3. Stroke Length (P3 Pro Turbo): The P3 Pro Turbo offers stroke lengths of 3.0, 3.5, 4.0, 4.5, 5.0mm. Refer to the specific model's markings for adjustment.

Image: Adjusting the needle protrusion.

Image: Adjusting the stroke length.

3. Basic Operation

3.1 Power ON/OFF

• To Power ON: Press and hold the power button for two seconds.
• To Power OFF: Press and hold the power button for two seconds.
• Auto Power Off: The P3 Pro features an auto power-off function. If the machine has not been used for 5 minutes, it will automatically turn off to conserve battery.

3.2 Power START/STOP

• To Start/Stop: Click the power button to start or stop the P3 Pro.

3.3 Adjust Voltage

• Fine Adjustment: Press the Up or Down buttons to adjust the voltage in 0.1V increments.
• Quick Adjustment: Press and hold the Up or Down buttons to quickly adjust the voltage.

3.4 Start/Stop Built-in Timer

• To Activate: Press the timer button to activate the machine ON, and the timing mode will start.
• Note: The timer records in minutes, with a maximum recording time of 999 minutes. The time counts only when the machine is running. The timer will reset when the P3 Pro is restarted.

3.5 Push Mode

• To Activate: Press the Up and Down buttons at the same time. The screen will show a solid indicator, and the machine will activate push mode.
• Note: In push mode, the initial voltage output is 10V for 1 second, then returns to the normal voltage.

4. Maintenance

• Cleaning: Regularly clean the exterior of the machine with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
• Sterilization: Ensure proper sterilization procedures are followed for all parts that come into contact with skin or ink, according to industry standards.
• Storage: Store the machine in a dry, cool place away from direct sunlight and extreme temperatures.
• Battery Care: Avoid over-discharging or over-charging the battery. Do not use fast charging/super fast charging adapters, as this may damage the battery.

5. Troubleshooting

5.1 Battery-Related Issues

• Machine Shuts Down Unexpectedly: The battery circuitry protects against extreme temperature, over-discharge, and over-charge. If the machine becomes overloaded or its operating temperature exceeds 158°F (70°C), the battery pack will shut down. It will resume normal operation once the temperature returns to 152°F (67°C). This can occur in situations with extremely high torque, binding, or stalling.
• Charging Problems: Ensure you are using the provided Type-C charging cable and a standard power adapter. Avoid fast charging/super fast charging, as this can damage the battery.

5.2 General Operation Issues

• Machine Not Turning On: Ensure the battery is charged. Press and hold the power button for at least two seconds to turn it on.
• Voltage Not Adjusting: Check if the buttons are functioning correctly. If the machine is in push mode, it will return to normal voltage after 1 second.

6. Specifications

6.1 EZ P3 Pro Wireless Pen Machine

6.2 EZ P3 PRO Turbo Wireless Machine Pen

7. User Tips

• Charging Caution: This device does not support fast charging/super fast charging. Using such chargers may damage the battery and void the warranty.
• Battery Protection: The machine is designed with battery protection features that will temporarily shut down operation under extreme conditions (overload, high temperature) to prevent damage. Allow the machine to cool down or reduce load if this occurs.
• Product Variants: The EZ P3 Pro and P3 PRO Turbo are distinct models with different specifications, particularly regarding stroke length and motor type. Please verify which model you have received.
• Included Items: Typically, one machine (P3 Pro or P3 PRO Turbo) and one battery are included per unit. Always check your specific product packaging for exact contents.

8. Warranty Information

If the product malfunctions during the warranty period, EZ provides the following warranty coverage from the date of purchase from an authorized distributor:

• Motor: One (1) Year
• Battery Pack: Six (6) Months
• Spare Parts: Three (3) Months

Warranty Exclusions:

The warranty does not cover:

• Damage to the product due to human factors (e.g., misuse, accidental damage).
• Product damage due to external electrical failure or any accident.

For detailed warranty terms, please refer to the official user manual PDF.

9. Support

For further assistance or inquiries, please contact EZ Tattoo Official Store support:

• Email: sales@eztattooing.com
• Phone: +86-153-9755-3908
• Address: 4/F Building 7(7DONG)NO.289 FAHUA NORTH ROAD JINYI NEW DISTRICT, JINHUA 321036 ZHEJIANG CHINA

A comprehensive user manual in PDF format is also available for download. You can find it by searching for 'EZ P3 Pro User Manual PDF' on the official EZ Tattoo website or by referencing the original product page.