Introduction
Thank you for choosing the Blackbird BB16 or BB16S Wireless GPS Bike Computer. This manual provides detailed instructions for the setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
The Blackbird BB16 and BB16S are advanced GPS bike computers designed to track your cycling data with precision. The BB16S model offers enhanced features, including support for external sensors like heart rate, speed, and pedal frequency.
Image: Blackbird BB16S Smart GPS Bike Computer, highlighting its upgrade features.
Product Overview & Comparison
The BB16 and BB16S models offer distinct features. Refer to the table below for a quick comparison:
Image: Feature comparison between Blackbird BB16 and BB16S models.
- BB16: Displays 3 data items on a single screen, tracks 9 cycling data types.
- BB16S: Displays 5 data items on a single screen, tracks 18 cycling data types, and supports Heart Rate, Speed, and Pedal Frequency sensors.
Setup
1. Package Contents
Ensure all items are present in your package:
Image: Blackbird BB16 unit, packaging, and included accessories (USB cable, mounting rings, bike mount).
2. Mounting the Device
- Attach the bike mount to your handlebar or stem using the provided rubber rings.
- Align the back of the Blackbird computer with the mount.
- Twist the computer clockwise until it locks securely into place.
Safety Information: Please pay attention to safety during installation to prevent the device from falling off during your ride.
3. Initial Power-On and GPS Acquisition
- Press and hold the power button (usually on the side or bottom) to turn on the device.
- For initial GPS acquisition, take the device outdoors to an open area. The device will automatically search for satellite signals.
- The GPS icon on the display will become solid when a signal is acquired. The device supports two satellite positioning systems for accuracy.
Image: Illustration of the two satellite positioning systems used by the Blackbird BB16.
4. Pairing External Devices (BB16S Only)
The BB16S supports linking with external speed, pedal frequency, and heart rate intelligent peripherals via universal Bluetooth radio.
Image: Diagram illustrating the wireless connection of external devices (speed, pedal frequency, heart rate sensors) to the BB16S.
- Ensure your external sensors (Heart Rate, Speed, Pedal Frequency) are active and within range.
- Navigate to the device's settings menu (refer to the on-screen prompts or the full PDF manual for specific button presses).
- Select 'Pair Device' or 'Add Sensor'.
- Choose the type of sensor you wish to pair. The device will scan for available sensors.
- Select your sensor from the list to complete pairing.
Operating Instructions
1. Basic Navigation
The device typically features a few buttons for navigation:
- Power Button: Long press to power on/off. Short press to toggle backlight or confirm selections.
- Up/Down Buttons: Navigate through menus or change displayed data fields.
- Start/Stop Button: Start or pause recording a ride.
2. Display Modes and Data Fields
Your Blackbird bike computer can display various cycling data. The BB16 shows 3 data items per screen, while the BB16S shows 5. Common data fields include:
- Speed (Current, Average, Max)
- Distance (Trip, Total)
- Time (Ride Time, Clock)
- Altitude/Elevation
- Heart Rate (Current, Average, Max - BB16S only)
- Cadence (Current, Average, Max - BB16S only)
- Calories
- Temperature
Use the Up/Down buttons to cycle through different data screens or customize the data fields displayed on each screen via the settings menu.
Image: Example of data fields displayed on the device and within the Blackbird cycling APP, including Heart Rate, Speed, Distance, and Time.
3. Recording a Ride
- Ensure GPS signal is acquired (solid GPS icon).
- Press the Start button to begin recording your ride.
- During the ride, you can switch between data screens.
- To pause, press the Start/Stop button. Press again to resume.
- To end the ride, long press the Start/Stop button. The device will save the ride data.
4. Automatic Sleep and Auto-Pause
The device features automatic sleep and auto-pause functions to conserve battery and accurately record your ride data:
- Auto-Pause: When you stop moving during a ride, the device will automatically pause recording. Recording resumes when you start moving again.
- Automatic Sleep: If the device is inactive for a prolonged period (e.g., after a ride is finished and not turned off), it will enter a low-power sleep mode.
5. Data Synchronization
Synchronize and share your cycling records using the Blackbird cycling APP:
- Download and install the Blackbird cycling APP on your smartphone.
- Pair your bike computer with the APP via Bluetooth.
- The records are synchronized and uploaded to the APP.
- The APP supports FIT file export and sharing to other platforms.
Maintenance
1. Charging
The device uses a Type-C charging interface. Connect the provided USB Type-C cable to the charging port on the device and to a standard USB power source (e.g., computer, wall adapter). A full charge typically takes a few hours.
2. Waterproofing
The Blackbird bike computer has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in rain but should not be submerged for extended periods or used for diving.
3. Cleaning
Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the screen or casing.
Troubleshooting
- Device won't turn on: Ensure the battery is charged. Connect to a power source and try again.
- No GPS signal: Move to an open outdoor area away from tall buildings or dense foliage. Allow a few minutes for the device to acquire a signal.
- External sensor not pairing (BB16S): Ensure the sensor is active, has fresh batteries, and is within range. Try restarting both the bike computer and the sensor.
- Data not syncing to APP: Ensure Bluetooth is enabled on your smartphone and the bike computer is paired with the Blackbird cycling APP. Check for APP updates.
- Inaccurate data: Ensure the device is securely mounted and has a clear view of the sky for GPS. For BB16S, ensure external sensors are correctly installed and calibrated if applicable.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Blackbird |
| Model Number | BB16, BB16S |
| Type | Wireless GPS Bike Computer |
| Stopwatch and Accessories | Waterproof Stopwatch |
| Display Size | 2.3 inches |
| Display Color | Black and White |
| Touch Screen | No |
| Waterproof Level | IPX7 |
| Charging Interface Type | Type-C |
| Navigation | No |
| External Devices Support | Yes (BB16S only) |
| Automatic Sleep | Yes |
| Auto-Pause | Yes |
| Language | English |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
User Tips
- Secure Mounting: Always ensure your bike computer is securely mounted to prevent it from detaching during bumpy rides.
- Regular Charging: Charge your device regularly, especially before long rides, to avoid unexpected power loss.
- App Integration: Utilize the Blackbird cycling APP for detailed ride analysis, data storage, and easy sharing of your cycling achievements.
- Firmware Updates: Check the Blackbird cycling APP or official website periodically for firmware updates to ensure your device has the latest features and bug fixes.
Warranty and Support
For detailed warranty information, technical support, or further inquiries, please refer to the official Blackbird documentation or contact customer service.
A comprehensive user manual in PDF format is available for download: Blackbird BB16 User Manual (PDF).
