1. Introduction
The JIKONG V19 JK-PB1A16S10P Smart Battery Management System (BMS) is designed for advanced battery pack management, offering active balancing, comprehensive protection, and intelligent monitoring capabilities. This BMS is suitable for various battery types including Li-ion, LiFePO4, and LTO, supporting configurations from 8S to 16S with a continuous charge/discharge current of 100A. It is ideal for household energy storage systems, communication base stations, building energy storage, industrial energy storage, and other applications requiring reliable battery management.

2. Product Features
- Active Balancing: Features active energy transfer equalization with a supercapacitor, ensuring good durability, long life, and stable performance. Achieves 1A continuous balanced current.
- Wide Compatibility: Supports Li-ion, LiFePO4, and LTO battery types, with a single cell voltage range of 1V to 5V and equalization accuracy of ±5mV.
- High Current Capacity: Supports 100A continuous discharge current and 200A overcharge protection current (adjustable).
- Intelligent Communication: Equipped with Bluetooth for mobile app connectivity (Android and iOS), RS485, RS232, CAN, and UART interfaces for versatile system integration.
- Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
- Patented Parallel Protection Technology: Integrated 10A current limiting module supports parallel connection of multiple battery packs for safe expansion.
- Efficient Thermal Management: Designed with an aluminum alloy heat sink to reduce temperature rise and enhance reliability.
- Real-time Monitoring: Mobile app and PC software allow real-time viewing of battery status, voltage, current, temperature, and cycle data.




3. Specifications
The following table details the technical specifications for the JIKONG V19 JK-PB1A16S10P Smart BMS:
| Technical Index | Specification (JK-PB1A16S10P) |
|---|---|
| Brand Name | JIKONG |
| Model Version | V19 |
| Type | LIFEPO4 Battery BMS (Active Balanced BMS) |
| Handware or Smart | SMART BMS |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Number of Battery Strings (Li-Ion) | 7S-16S |
| Number of Battery Strings (LiFePO4) | 8S-16S |
| Number of Battery Strings (LTO) | 14S-16S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 1A |
| Conductive Resistance in Main Circuit | 1mΩ |
| Continuous Discharge Current | 100A |
| Maximum Discharge Current (MAX 2min) | 100A |
| Over Charge Protection Current (ADJ) | 200A |
| Other Interfaces (Default) | RS485/232/CAN/UART |
| Supply Voltage | 20-70V |
| Charge and Discharge Port | Common Port BMS |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Current Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 4 |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS/Harmony |
| Parallel Charging Current Limiting | 10A |
| Address Dial Switch | 4 |
| DRY Contact | 2 |

4. Packing List
The standard package for the JIKONG V19 JK-PB1A16S10P Smart BMS includes the following components:
- BMS x 1
- Interface board x 1
- Adapter cable B x 1 (long 30cm)
- Adapter cable A x 1 (long 30cm)
- R545 Network cable x 1 (long 40cm)
- Cells total B+ Cable x 1 (long 50cm)
- Sampling line A x 2 (long 90cm)
- Sampling line B x 1 (long 90cm)
- Sampling line C x 1 (long 90cm)
- Switch x 1 (long 50cm)
- Adapter cable C x 1 (long 30cm)
- Heating Adapter cable x 1 (long 17cm)
- Adapter x 1

Optional accessories such as various display screens (2.5-inch, 3.2-inch, 4.3-inch touch display), switch keys, and RS485 modules are available separately.

5. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your JIKONG Smart BMS. Please follow these general steps carefully. Refer to the wiring diagrams for specific connections.
- Connect all cables: Ensure all necessary communication and sampling cables are connected to the BMS and interface board.
- Insert the cable into the BMS: Securely connect the main cables to the BMS unit.
- Connect the B-line and the P-line to the battery: The B-line (battery negative) and P-line (load/charger negative) must be correctly connected to your battery pack.
- B8 Cable Note: There are two B8 cables. Only the first B8 cable needs to be connected. The second B8 cable does not need to be connected.
Wiring Diagrams:

Application Scenarios:

6. Operating Instructions
The JIKONG Smart BMS offers multiple ways to monitor and manage your battery system.
6.1 Mobile App Operation
The mobile app "JIKONG BMS" supports Android, iOS, and HarmonyOS. It allows real-time viewing of battery status, including voltage, current, temperature, State of Charge (SOC), alarms, and cycle counts. You can also adjust various protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings.


6.2 PC Software Operation
For more detailed control and configuration, the JIKONG BMS can be managed via PC software. This allows for intelligent interaction and easy operation, including setting inverter communication protocols and adjusting protection parameters. Always read the internal parameters of the protection board before making changes.


6.3 Communication Interfaces
The BMS supports various communication modes for integration into different systems:
- CAN
- RS485
- UART
- RS232

7. Maintenance
To ensure the longevity and optimal performance of your JIKONG Smart BMS, consider the following maintenance guidelines:
- Regular Inspection: Periodically check all cable connections to ensure they are secure and free from corrosion or damage.
- Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges to prevent damage.
- Software Updates: Check for and apply any available firmware or software updates for the mobile app or PC software to ensure you have the latest features and bug fixes.
8. Troubleshooting
If you encounter issues with your JIKONG Smart BMS, consider the following common troubleshooting steps:
- No Power/No Indication:
- Verify that the main battery connections (B- and P-) are correctly and securely attached.
- Check the supply voltage to ensure it is within the 20-70V range.
- Inspect all cables for breaks or loose connections.
- Balancing Issues:
- Ensure all cell sampling lines are correctly connected to the battery cells.
- Check the mobile app or PC software for any balancing error messages.
- Communication Problems (Bluetooth/RS485/etc.):
- For Bluetooth, ensure the BMS is powered on and within range. Restart the app and try reconnecting.
- For wired communication (RS485, UART, CAN), check cable integrity and ensure correct protocol settings in the software.
- Protection Triggered (Overcharge, Overdischarge, Overcurrent, Short Circuit):
- Identify the specific protection triggered via the app or display.
- For overcharge/overdischarge, check individual cell voltages.
- For overcurrent/short circuit, reduce the load or inspect for external faults in the battery system.
- The BMS will automatically reset some protections once the fault condition is removed.
If problems persist, consult the detailed documentation provided by JIKONG or contact customer support.
9. User Tips
- Initial Setup: Always double-check all wiring connections before applying power to prevent damage to the BMS or battery pack.
- App Monitoring: Regularly use the mobile app to monitor your battery's health and performance. This can help identify potential issues early.
- Parameter Adjustment: When adjusting protection parameters via the app or PC software, make small, incremental changes and observe the system's behavior. Refer to battery manufacturer specifications for safe operating limits.
10. Warranty and Support
For warranty information, terms, and conditions, please refer to the official JIKONG product documentation or contact your point of purchase. For technical support, assistance with installation, or troubleshooting beyond the scope of this manual, please reach out to JIKONG customer service or an authorized service center.
JIKONG is committed to providing high-quality products and support. For personalized customization services related to structure, hardware, or software, please consult customer service.
