Introduction
Thank you for choosing the HIENA Professional Cordless Hair Clipper. This device is designed for precise and efficient hair and beard trimming, offering both professional-grade performance and the convenience of cordless operation. Please read this manual thoroughly before first use to ensure safe and optimal performance of your clipper.
Package Contents
Carefully unpack your HIENA Hair Clipper and check for the following items:
- 1 x HIENA Professional Hair Clipper (Model HYN-222)
- 4 x Guide Combs (1.5mm, 3.0mm, 4.5mm, 6.0mm)
- 1 x Cleaning Brush
- 1 x USB Charging Cable (1.5M length)
- 1 x User Manual (this document)

Product Overview
The HIENA Hair Clipper is engineered for ease of use and durability. Key features include:
- Fine Steel Cutter Head: Designed for precise and smooth cutting.
- R-shaped Fillet Blades: Ensures safety and prevents skin irritation.
- Adjustable Lever: An 'Aircraft handle metal switch' allows for 4-speed fine-tuning of cutting length from 0.8mm to 2.0mm.
- LED Display: Provides real-time information on battery level, an oil reminder, and charging status.
- Push Switch: Simple on/off operation.
- USB Charging & Hooking: Convenient USB charging port and an integrated loop for easy storage.
- Self-Sharpening Blades: Maintains sharpness over time for consistent performance.
- Carbon Steel Cutter: Durable and made from safety materials.



Setup
Charging the Clipper
Before first use, fully charge the clipper. Connect the USB charging cable to the clipper's charging port and plug the other end into a compatible USB power source (e.g., power bank, computer, wall adapter, or power socket). The LED display will show the charging status. A full charge takes approximately 3 hours and provides up to 180 minutes of usage time.


Attaching Guide Combs
Select the desired guide comb (1.5mm, 3.0mm, 4.5mm, or 6.0mm) for your preferred cutting length. Align the comb with the clipper head and push it firmly until it clicks into place. To remove, gently pull the comb away from the clipper head.
Adjusting Blade Length
The clipper features an adjustable lever on the side, allowing for fine-tuning of the cutting length from 0.8mm to 2.0mm without a guide comb. Move the lever up or down to select the desired length. This lever provides 4-speed adjustment for accurate hair retention.


Operating Instructions
- Prepare for Use: Ensure the clipper is fully charged. Select and attach the appropriate guide comb if desired, or adjust the blade lever for a shorter cut.
- Power On: Press the push switch to turn on the clipper. The LED display will illuminate, showing the battery level.
- Trimming: Hold the clipper firmly and move it against the direction of hair growth. For best results, use slow, even strokes.
- Monitor LED Display: Pay attention to the battery indicator to avoid interruptions during use. If the oil reminder icon appears, it's time to lubricate the blades.
- Power Off: Once finished, press the push switch again to turn off the clipper.

Maintenance
Regular maintenance ensures the longevity and optimal performance of your clipper.
Cleaning the Blades
- Turn off the clipper and disconnect it from any charging source.
- Remove the guide comb.
- Use the provided cleaning brush to remove any loose hair from the blades and the clipper head.
- For a more thorough clean, you may carefully detach the blade head (refer to product overview image for guidance on tool head adjustment) and brush away debris. Reattach securely.
Oiling the Blades
After each use, or when the 'Oil reminder' icon appears on the LED display, apply a few drops of clipper oil (not included) to the blades. Turn the clipper on for a few seconds to allow the oil to distribute evenly. This helps maintain blade sharpness and smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on | Low battery or not charged | Charge the clipper fully (approx. 3 hours). |
| Poor cutting performance | Blades are dull, dirty, or not oiled | Clean the blades thoroughly and apply clipper oil. Ensure blades are free of hair and debris. |
| Clipper pulls hair | Blades are dirty, not oiled, or damaged | Clean and oil the blades. If the problem persists, inspect blades for damage. |
| LED display not working | Clipper is off or battery is completely drained | Turn on the clipper. If still off, connect to charger. |
Specifications
| Feature | Detail |
|---|---|
| Brand | HIENA |
| Model | HYN-222 |
| Item Type | Hair Trimmer |
| Origin | Mainland China |
| Certification | CE |
| Battery Type | Lithium Battery |
| Battery Capacity | 1200mAh |
| Charging Time | Approx. 3 hours |
| Usage Time | Approx. 180 minutes |
| Charging Cable Length | 1.5 meters |
| Guide Comb Sizes | 1.5mm, 3.0mm, 4.5mm, 6.0mm |
| Adjustable Blade Length | 0.8mm - 2.0mm |
| Package Dimensions (L x W x H) | 21cm x 11cm x 6cm |
| Package Weight | 0.299 kg |
User Tips
- Optimal Performance: Always ensure your clipper is fully charged before use to maintain consistent power and prevent snagging.
- Blade Care: Regularly clean and oil the blades. This is crucial for maintaining sharpness and extending the life of your clipper. The LED oil reminder is a helpful prompt.
- Comb Compatibility: The clipper comes with four standard guide combs (1.5mm, 3.0mm, 4.5mm, 6.0mm). These are designed for optimal fit and performance with your HIENA clipper.
- Storage: Utilize the integrated hooking loop for convenient and safe storage, keeping the clipper accessible and protected.
Warranty & Support
For any questions, concerns, or technical support regarding your HIENA Professional Cordless Hair Clipper, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.