1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the GEYA GRD9L-W Tuya WIFI Smart Circuit Breaker. This device is designed for intelligent household electricity management and photovoltaic distribution systems, offering remote control and advanced protection features. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
2. Safety Information
- Installation and maintenance should only be performed by qualified personnel.
- Ensure power is disconnected from the main supply before any installation, wiring, or maintenance procedures.
- Do not operate the device with wet hands.
- Always follow local electrical codes and regulations.
- Verify all connections are secure and correct before restoring power.
3. Package Contents
- 1 x GEYA GRD9L-W Tuya WIFI Smart Circuit Breaker
- 1 x User Manual
- Wiring terminals (pre-installed or included)
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | GRD9L-W+GYL9 RCCB Recloser |
| Brand Name | GEYA |
| Type | Residual Current, RCD |
| Is Smart Device | Yes |
| Rated Voltage | 220V |
| Origin | Mainland China |
| Certification | CE, RoHS, WEEE |
| Product Name | RCCB ELCB Auto Recloser |
| Recloser Voltage Range | AC220V |
| Control Mode | Control through Tuya WiFi |
| Recloser Mode | GRD9L-W-AC220V |
| RCCB Mode | GYL9 AC Type or A Type |
| Package Length | 12 cm |
| Package Width | 10 cm |
| Package Height | 5 cm |
| Package Weight | 0.42 kg |
5. Setup
5.1. Wiring Installation
Important: Ensure all power is disconnected before proceeding with wiring.
- Connect the main power supply (Live 'L' and Neutral 'N') to the input terminals of the circuit breaker.
- Connect the load (e.g., light bulb) to the output terminals of the circuit breaker.
- For external control or status indication, connect control wires (A1, A2, NC, 1, 2, 3, 4) as shown in the wiring diagram.

5.2. App Installation
To control the device via WiFi, you need to install the Tuya Smart app:
- Scan the QR code below with your smartphone or search for 'Tuya Smart' in your device's app store (Google Play Store or Apple App Store).
- Download and install the app.

5.3. WiFi Connection and Device Pairing
- Ensure your mobile phone is connected to a 2.4GHz WiFi network.
- Open the Tuya Smart app and click 'Add Device' to begin the pairing process.
- Follow the prompts in the app. You will need to input your WiFi network details.
- The device icon and WiFi indicator will appear in the app once successfully connected. The green LED on the device will remain on when the WiFi connection is normal.
- Reconfigure WiFi: If you need to restore the factory condition or reconfigure WiFi, operate the button 5 times within 5 seconds. The device will enter the distribution network state, and the WiFi indicator will flash. Then, you can add the device again through the app.
6. Operating Instructions
The GEYA GRD9L-W features both manual and automatic operation modes, indicated by an LED light.
6.1. Manual Mode
When the selector switch on the device is set to 'MANU' (Manual) mode, the product can be manually opened or closed using the physical switch on the device. In this mode, remote commands from the APP will be invalid.
6.2. Auto Mode (Control Through Tuya WiFi APP)
When the selector switch is set to 'AUTO' (Automatic) mode, the product can be controlled remotely via the Tuya Smart APP. The green LED indicates normal WiFi connection, while a flashing green LED indicates a waiting configuration state. A red LED indicates a trip fault.
- Remote Control: Within the Tuya Smart APP, you can remotely switch the circuit breaker ON or OFF. The app will prompt you to confirm if the circuit is safe to power on/off before executing the command.
- Scheduling: You can set a regular time for the circuit breaker to turn ON or OFF automatically through the app's scheduling function.
- Sunrise Timing: Configure the equipment to turn ON/OFF before, during, or after sunrise.
- Sunset Timing: Configure the equipment to turn ON/OFF before, during, or after sunset.
7. Maintenance
- Regular Inspection: Periodically check the device for any physical damage, loose connections, or signs of overheating.
- Monthly Test: Press the 'Test Monthly' button on the device periodically (at least once a month) to ensure the Residual Current Device (RCD) function is working correctly.
- Cleaning: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
8. Troubleshooting
Refer to the table below for common faults and their resolutions:
| Fault Description | Resolution |
|---|---|
| Unable to close or open |
|
| Trip immediately after closing |
|

9. User Tips
- RCCB Type Selection: The GYL9 RCCB comes in AC Type or A Type. AC type detects sinusoidal alternating currents, while A type detects sinusoidal alternating currents and pulsating direct currents. Choose the appropriate type based on your specific electrical system requirements.
- Smart Home Integration: This device is compatible with Tuya Smart, Google Assistant, and Amazon Alexa, allowing for seamless integration into your smart home ecosystem for voice control and advanced automation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Refer to the product packaging or manufacturer's official website for the most up-to-date contact details and support resources.