JIKONG JK-BD4A24S8P

Contents

JIKONG Smart Active BMS (JK-BD4A24S8P) User Manual

Model: JK-BD4A24S8P

For Li-Ion, LiFePo4, and LTO Batteries (8S-24S)

1. Introduction

The JIKONG Smart Active Battery Management System (BMS) model JK-BD4A24S8P is an advanced solution designed to manage and protect various battery chemistries, including Li-Ion, LiFePo4, and LTO. This intelligent BMS supports battery configurations from 8S to 24S and features an 80A charge/discharge current capacity. It incorporates active balancing technology to ensure optimal cell voltage equalization, prolonging battery lifespan and enhancing overall performance. This manual provides essential information for the proper installation, operation, and maintenance of your JIKONG BMS.

JIKONG JK-BD4A24S8P BMS overview with key features
Figure 1: JIKONG JK-BD4A24S8P BMS overview highlighting its function (BT/Display), type (Battery BMS), balancing current (0.4A), supported battery strings (8S-24S), charge/discharge current (80A), and battery types (Li-ion/Lifepo4/LTO).

2. Setup and Installation

2.1. Packing List

Before installation, verify that all components are present:

  • BMS Unit x 1
  • Sampling Cable x 2
  • NTC Temperature Sensor x 1
  • Switch Key x 1
Packing list for JIKONG BMS
Figure 2: Contents of the JIKONG BMS package, including the BMS unit, switch, NTC sensor, and two sampling lines.

2.2. Wiring Instructions

Careful wiring is crucial for the safe and correct operation of the BMS. Follow these general steps:

  1. Connect all necessary cables (balance wires, temperature sensors, communication cables).
  2. Insert the cables securely into their respective ports on the BMS.
  3. Connect the B-line (negative terminal of the battery pack) and the P-line (negative terminal for load/charger) to the battery.

Refer to the specific wiring diagrams below for your battery string configuration:

2.2.1. 24-String Cell Wiring Diagram

Wiring diagram for a 24-string battery configuration with JIKONG BMS
Figure 3: Detailed wiring diagram for connecting the JIKONG BMS to a 24-string battery pack, showing connections for individual cells, NTC, total negative electrode (B-), and total positive electrode (P+), along with inverter and charger connections.

2.2.2. 16-String Cell Wiring Diagram

Wiring diagram for a 16-string battery configuration with JIKONG BMS
Figure 4: Detailed wiring diagram for connecting the JIKONG BMS to a 16-string battery pack, showing connections for individual cells, NTC, total negative electrode (B-), and total positive electrode (P+), along with inverter and charger connections.

2.3. Interface Connections

The BMS offers rich interfaces for various communication and control needs:

  • Communication: CAN, RS485, Bluetooth (BT)
  • Sensors: NTC (Temperature)
  • Control: Soft Switch, Key Switch
  • Indicators: SOC Indicator
  • Balancing: Active Equalizer
  • Customized Ports: GPS, NTC, Heat, Sampling ports A and B, Display/Switch Key.
JIKONG BMS internal components and interfaces
Figure 5: Exploded view of the JIKONG BMS showing internal components like the Jikong MCU, MOS, and cooling aluminum alloy, along with sampling lines and NTC connections.

3. Operating Instructions

3.1. Monitoring and Data Connection

The JIKONG BMS provides multi-screen display and data connection capabilities for comprehensive monitoring:

  • Mobile App: The "JIKONG SMART BMS" mobile app (available for iOS, Android, and HarmonyOS) allows you to view all kinds of battery information at a glance. The app supports multiple languages and can be switched automatically with your mobile phone system.
  • PC Software: A dedicated PC software is available for more detailed monitoring and control.
  • External Display: An optional JIKONG home storage dedicated display can be connected to view key parameters directly.

Through these interfaces, you can view multiple information such as voltage, current, temperature, and number of strings.

Multi-screen display options for JIKONG BMS data
Figure 6: Illustration of multi-screen display options for the JIKONG BMS, including mobile app, PC software, and a dedicated home storage display, showing various battery parameters like voltage, current, temperature, SOC, and cycles.
JIKONG home storage dedicated display
Figure 7: The JIKONG home storage dedicated display showing real-time battery information such as voltage, current, temperature, and state of charge.

3.2. Parameter Adjustment

The BMS allows for intelligent interaction and easy operation. You can freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings. To adjust parameters, access the internal settings via the mobile app or PC software.

JIKONG BMS software interface for parameter adjustment
Figure 8: Screenshot of the JIKONG BMS software interface, demonstrating the ability to adjust various protection parameters and view real-time data.

3.3. Inverter Communication

The JIKONG BMS supports protocol docking with mainstream inverter communication protocols in the market. This allows for seamless integration with various power systems. The inverter communication protocol can be set through the mobile app or the host computer software.

JIKONG BMS mobile app showing supported CAN protocols
Figure 9: The JIKONG mobile app interface displaying a list of supported CAN protocols for inverter communication, including Deye, Pylontech, Growatt, Victron Energy, INVT, GoodWe, SMA, and SRNE.
JIKONG BMS host computer interface for inverter communication settings
Figure 10: The JIKONG BMS host computer interface for setting inverter communication protocols, showing a table of supported CAN protocols and their names.

4. Maintenance

4.1. Active Balancing

The JIKONG BMS features intelligent active balancing technology. Active balancing transfers energy from cells with higher energy to those with lower energy, achieving voltage balance with minimal energy loss. It operates continuously, regardless of charging, discharging, or idle states, until the voltage difference is within a set range. This process significantly improves the dilemma of the battery not being fully charged and fully discharged, leading to a longer lifespan and more stable performance for your battery pack.

Comparison of battery cell balance before and after using JIKONG BMS
Figure 11: Comparison of cell voltage pressure difference before and after active balancing, demonstrating the improved equalization effect of the JIKONG BMS.

4.2. Heat Dissipation

The BMS is designed with a fully aluminum alloy shell, which provides superior heat dissipation. This robust casing also reduces the damage from the external environment on the electronic components, ensuring long-term reliability.

Exploded view of JIKONG BMS showing aluminum alloy shell for heat dissipation
Figure 12: Exploded view illustrating the fully aluminum alloy shell of the JIKONG BMS, emphasizing its role in superior heat dissipation and protection of internal components.

5. Troubleshooting

The JIKONG BMS is equipped with multiple protection functions to ensure the safety and longevity of your battery pack. If you encounter any issues, consider the following:

  • Protection Triggers: The BMS includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection. If the system shuts down or behaves unexpectedly, check for conditions that might have triggered these protections.
  • Voltage Imbalance: The active balancing feature works to minimize voltage differences. If significant imbalances persist, verify all balance wire connections are secure and correct.
  • Communication Issues: Ensure Bluetooth is enabled on your mobile device and the app is correctly paired. For PC or inverter communication, check cable connections and protocol settings.
  • Diagnostics: Use the mobile app or PC software to access real-time data and error logs. This can provide specific fault codes or warnings that help pinpoint the problem.

For complex issues, consult the detailed technical specifications and consider contacting customer support.

6. Specifications

FeatureSpecification
BrandJIKONG
ModelJK-BD4A24S8P
BMS TypeSMART BMS, Active Balanced BMS, Common Port BMS, LIFEPO4 Battery BMS
Supported Battery Strings8S-24S
Charging Current (Max)80A (Model Specific), up to 200A for other variants
Discharge Current (Max)80A (Model Specific), up to 200A for other variants
Active Balancing Current0.4A (Model Specific), 0.6A-2A (General Active Balancing Range)
Supported Battery TypesLi-ion, LiFePo4, LTO
Protection FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Voltage Detection Accuracy±0.015V
Short Circuit Protection Response10-500μs
CertificationCE, FCC
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
OriginMainland China
Package Dimensions (L x W x H)22 cm x 16 cm x 5 cm
Package Weight0.4 kg
JIKONG Product Specifications Table
Figure 13: Detailed product parameter table for various JIKONG BMS models, including the JK-BD4A series, showing number of battery strings, balance current, continuous charge/discharge current, and other technical indices.

6.1. Application Scenarios

The JIKONG BMS is suitable for a wide range of applications, including:

  • E-bikes
  • Electric Tricycles
  • Low Speed Quads
  • Forklifts
  • Cleaning Cars
  • Tourist Cars
  • Industrial Drones
  • Scooters
  • RV Energy Storage
  • Energy Storage Cabinets
  • Power Banks
  • Power Tools
JIKONG BMS application scenarios
Figure 14: Visual representation of various application scenarios where the JIKONG BMS can be used, such as E-bikes, electric tricycles, forklifts, industrial drones, and RV energy storage.

7. User Tips

  • Always double-check all wiring connections before powering on the BMS to prevent damage to the unit or battery pack.
  • Utilize the mobile app or PC software for initial setup and parameter configuration to ensure optimal performance for your specific battery type and application.
  • Regularly monitor battery health and cell balance through the app to proactively identify and address any potential issues.
  • Keep the BMS in a well-ventilated area to aid in heat dissipation, especially during high charge/discharge cycles.

8. Warranty and Support

For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the JIKONG customer service directly. Ensure you have your product model number (JK-BD4A24S8P) and purchase details available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.