1. Introduction
The JIKONG JK-BD6A20S10P is an intelligent active balanced power management system (BMS) designed for various battery types, including Li-ion, LiFePo4, and LTO batteries. It supports battery configurations from 8S to 24S series and offers continuous charge/discharge currents of 100A, with an instantaneous discharge current capability of 200A. This Smart BMS features active balancing technology to optimize battery performance and longevity.
It is equipped with multiple interfaces for comprehensive communication and control, including RS485, CAN, GPS, Bluetooth (BT), NTC for temperature sensing, Soft Switch, SOC Indicator, Key Switch, and an Active Equalizer. The system is designed with a high-performance MCU and housed in a full aluminum alloy shell for excellent heat dissipation and robust protection.

2. Package Contents
Please verify that all items are present in your package:
- 1 x JIKONG BMS Unit
- 1 x NTC Temperature Sensor (long 40cm)
- 1 x Sampling Line B (long 70cm)
- 1 x Sampling Line A (long 70cm)

3. Specifications
The following table details the technical specifications of the JIKONG JK-BD6A20S10P BMS:
| Technical Index | Specification (JK-BD6A20S10P) |
|---|---|
| Number of Battery Strings (Li-ion/LiFePo4/LTO) | 8S-20S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 0.6A |
| Conductive Resistance in Main Circuit | 1mΩ |
| Continuous Discharge Current | 100A |
| Continuous Charge Current | 100A |
| Maximum Discharge Current (MAX 200A) | 200A |
| Over Charge Protection Current (J) | 10-100A |
| Other Interfaces (Customized) | RS485, CANBUS, HEAT |
| Size (mm) | 162*102*20mm |
| Wiring Output | Common Port |
| Single Cell Voltage Range | 1-5V |
| Voltage Detection Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Discharge Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 3Pcs |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS phone |


4. Setup and Wiring
Proper installation and wiring are critical for the safe and efficient operation of your JIKONG BMS. Follow these steps carefully:
- Connecting all the cables: Ensure all necessary balance wires and communication cables are prepared.
- Insert the cable into the BMS: Carefully connect the balance wires to the designated ports on the BMS.
- Connect the B-line and the P-line to the battery: Connect the main negative (B-) and positive (P-) lines from the BMS to your battery pack.
Refer to the following diagrams for detailed wiring instructions for 16-string and 24-string cell configurations:


Important: Always double-check all connections before powering on the system to prevent damage to the BMS or battery pack.
5. Operating Instructions
The JIKONG BMS offers intelligent interaction and easy operation through various interfaces:
5.1 Mobile APP (JIKONG SMART BMS)
The JIKONG SMART BMS mobile application acts as a personal lithium battery steward, providing clear and comprehensive information at a glance. It supports installation on iOS, Android, and HarmonyOS systems and offers multi-language support that automatically switches with your mobile phone's system settings.

5.2 PC Software
For advanced configuration and monitoring, the BMS can be connected to a host computer via PC software. This allows for detailed parameter adjustments and inverter communication protocol settings.

5.3 External Display Options
In addition to mobile and PC interfaces, the JIKONG BMS supports external display units for convenient monitoring of battery status.

5.4 Intelligent Interaction and Parameter Adjustment
The BMS allows users to freely adjust multiple protection values, including overcharge, over-discharge, overcurrent, temperature, and balance settings. Before making any adjustments, it is recommended to thoroughly understand the internal parameters of the protection board.

5.5 Supported CAN Protocols
The JIKONG BMS is compatible with mainstream inverter communication protocols in the market. The inverter communication protocol can be set up through the host computer. Refer to the table below for supported CAN protocols:
| Protocol Name | Compatible Inverter Brands |
|---|---|
| Low-voltage hybrid inverter CAN communication protocol | Deye, Growatt |
| PYLON CANBUS Protocol V1.2 | Pylontech |
| Growatt xxSxxP ESS Protocol V2.01 | Growatt |
| CAB-BUS_BMS_Protocol_201707 | INVT |
| INVT BMS CAN Bus protocol V1.02 | INVT |
| GoodWe LV BMS Protocol (CAN) V1.7(for ES/EM/BP Series) | GoodWe |
| FSS-ConnectingBat-TI-en-10 (Version 1.0) | FSS |
| PACE BMS Modbus Protocol for RS485 | PACE |

6. Maintenance
The JIKONG BMS is designed for durability and reliability with a fully enclosed aluminum alloy shell, providing effective dustproof, waterproof, anti-voltage, and anti-vibration protection. Internal high-strength insulating material filling further absorbs vibration and external pressure.
While the robust design minimizes maintenance needs, regular checks are recommended:
- Visual Inspection: Periodically inspect the BMS and all connected cables for any signs of damage, corrosion, or loose connections.
- Cleanliness: Keep the BMS unit clean and free from dust and debris to ensure optimal heat dissipation.
- Ventilation: Ensure the installation environment provides adequate ventilation around the BMS to prevent overheating.
- Software Updates: Check for and apply any available firmware or software updates for the mobile app or PC software to ensure optimal performance and access to new features.


7. Troubleshooting
The JIKONG BMS is equipped with various protection functions to ensure battery safety. If you encounter issues, consider the following:
- Overcharge/Over-discharge Protection: If the battery voltage exceeds or falls below the set thresholds, the BMS will trigger protection. Check individual cell voltages via the app/software. Adjust protection voltage parameters if necessary, ensuring they are within safe limits for your battery chemistry.
- Overcurrent Protection: If the current draw exceeds the continuous or instantaneous limits, the BMS will cut off power. Reduce the load or check for short circuits in the system.
- Short Circuit Protection: The BMS will immediately cut off power in case of a short circuit. Identify and rectify the short circuit before attempting to restart the system.
- Temperature Protection: If battery temperature exceeds safe operating limits, the BMS will activate protection. Ensure adequate ventilation and check for external heat sources.
- Balancing Issues: If cell voltages are significantly out of balance, the active balancing feature may be working to correct it. Monitor the balance status via the app. If persistent imbalance occurs, check balance wire connections.
- Communication Issues (Bluetooth/RS485/CAN): Ensure cables are securely connected and the communication interface (e.g., Bluetooth on your phone) is enabled and correctly paired. For RS485/CAN, verify wiring and protocol settings in the PC software.
For complex issues, refer to the detailed parameter settings within the mobile app or PC software. If problems persist, contact JIKONG customer support.
8. User Tips
- Verify Compatibility: Always ensure the BMS model is compatible with your battery chemistry (Li-ion, LiFePo4, LTO) and cell count (8S-24S) before installation.
- Careful Wiring: Double-check all balance wire connections and main power leads. Incorrect wiring is a common cause of issues and can damage the BMS or battery.
- Monitor Regularly: Utilize the mobile app or PC software to regularly monitor your battery's health, including individual cell voltages, temperature, and current. This helps in early detection of potential problems.
- Parameter Adjustment: When adjusting protection parameters, do so incrementally and understand the implications of each setting to avoid unintended consequences.
9. Warranty and Support
JIKONG Technology is committed to providing high-quality products and support. For any technical assistance, warranty claims, or inquiries, please contact the JIKONG Official Store or authorized distributors. Chengdu Jikong Technology Co., Ltd. is a high-tech enterprise with a strong R&D team, dedicated to active balance power battery management systems.
