1. Introduction
Thank you for choosing the Bloody V8M Max Mini Gaming Mouse. This high-performance wired mouse is engineered for precision and speed, featuring a lightweight design, customizable RGB lighting, and advanced technologies to enhance your gaming experience, especially for FPS games. This manual will guide you through the setup, operation, and maintenance of your new gaming mouse.
Figure 1: Bloody V8M Max Mini Gaming Mouse
2. Key Features
- Lightweight Hollow Design: Approximately 83g for swift movements.
- Customizable CPI: Adjustable from 100 to 12000 CPI with 5 drive-free gears.
- High Report Rate: Up to 2000Hz for rapid response.
- AFC (Anypoint Flexible Click) Technology: Ensures consistent and balanced clicks across the button surface.
- RGB Lighting System: Customizable 5-section RGB lamp effects.
- 4M Onboard Memory: Stores up to 7 key configurations for driverless use across different computers.
- BC3332-A Custom Engine: High-performance sensor for precise tracking.
- Durable Switches: Kailh Black Mamba microswitches rated for 80 million clicks (left/right).
- DIY Anti-Slip Stickers: Included for enhanced grip and stability.
- Soft Braided Cable: Improved line end SR for reduced friction and unrestricted movement.
Figure 2: Key Features Overview
3. Setup Guide
- Connect the Mouse: Plug the USB connector of the Bloody V8M Max Mini mouse into an available USB port on your computer.
- Driver Installation: The mouse is designed for driverless operation. Your operating system (Windows 7/8/8.1/10/11) should automatically recognize and install the necessary generic drivers.
- Optional Software Installation: For advanced customization, including key configurations, macros, and RGB lighting effects, download and install the "Blood Hand Book" software from the official Bloody website.
Figure 3: USB Connection with Soft Braided Cable
4. Operating Instructions
4.1. CPI Adjustment
The mouse features 5 drive-free CPI gears, allowing you to switch between 100 and 12000 CPI to suit various gaming and usage environments. Use the dedicated DPI adjust button on the mouse to cycle through the preset CPI levels.
Figure 4: CPI Adjustment Levels (100, 1500, 2000, 3200, 12000)
4.2. Report Rate Adjustment
Adjust the report rate (polling rate) of the mouse using the switch located on the bottom of the device. This allows you to select between four transmission report rates:
- 125Hz: Suitable for office and general games.
- 500Hz: Suitable for shooting and character games, general configuration.
- 1000Hz: Suitable for shooting and general games, general configuration.
- 2000Hz: Suitable for shooting and part games, general configuration.
Figure 5: Report Rate Switch on Mouse Bottom
4.3. LOD (Lift Off Distance) Adjustment
The mouse features a drive-free silent altitude (LOD) toggle, allowing you to switch between 4 levels of engine sensitivity. The default setting is 'P' for adaptive height.
- P: Default, adaptive height.
- 1.5mm
- 2.0mm
- 3.0mm
Figure 6: LOD Switch on Mouse Bottom
4.4. AFC (Anypoint Flexible Click) Technology
Inspired by lever design, the split key structure reduces plastic resistance and balances force, ensuring a consistent and responsive click regardless of where you press the key.
Figure 7: AFC Technology
4.5. Software Customization ("Blood Hand Book")
Utilize the "Blood Hand Book" software for comprehensive customization. This software allows you to define 7 key configurations, create macros, and adjust RGB lighting effects. It supports various game types including MMO, RPG, and FPS.
Figure 8: Blood Hand Book Software Interface
4.6. DIY Anti-Slip Stickers
The mouse comes with DIY anti-slip stickers. These can be applied to the mouse surface to improve grip and stability during intense gaming sessions. Ensure the mouse surface is clean and dry before applying the stickers.
Figure 9: DIY Anti-Slip Stickers
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the mouse.
- Cable Care: Avoid sharp bends or excessive pulling on the braided USB cable to prevent damage.
- Storage: Store the mouse in a clean, dry environment away from extreme temperatures and direct sunlight.
- Anti-Slip Stickers: If the anti-slip stickers lose their adhesion, they can be carefully removed and replaced.
6. Troubleshooting
If you encounter any issues with your Bloody V8M Max Mini Gaming Mouse, please try the following:
- Mouse not responding: Ensure the USB cable is securely plugged into your computer. Try a different USB port.
- Inconsistent tracking: Clean the mouse sensor with a soft cloth. Ensure you are using the mouse on a suitable mouse pad or surface.
- Software issues: Ensure you have the latest version of the "Blood Hand Book" software installed. Restart your computer.
- Buttons not clicking: Check for any physical obstructions. If using custom configurations, ensure they are correctly set in the software.
7. Specifications
| Feature | Specification |
|---|---|
| Model | Bloody V8M Max Mini |
| Connection | USB Wired |
| Sensor | BC3332-A12K Customization Engine |
| DPI (Resolution) | 100 to 12000 CPI (Adjustable) |
| Frame Rate | 8000 fps |
| Acceleration | 35g |
| Tracking Speed | 250 ips |
| Report Rate | 125 ~ 2000 Hz (Adjustable) |
| Key Reaction | 1 ms |
| Number of Buttons | 8 |
| Number of Rollers | 1 |
| Microswitch | Kailh Black Mamba (80 Million Times Life) |
| Roller Life | 500,000 laps |
| Memory | 4M EEPROM |
| Backlight | RGB (5-section effects) |
| Hand Orientation | Right |
| Dimensions (L x W x H) | 129 x 70 x 39 mm |
| Gross Weight | 180g (Mouse approx. 83g) |
| System Requirements | Windows 7/8/8.1/10/11 |
Figure 10: Detailed Product Specifications
Figure 11: Mouse Dimensions
8. User Tips
- Experiment with different CPI and Report Rate settings to find the optimal combination for your specific game and playstyle.
- Utilize the "Blood Hand Book" software to create custom macros and keybindings for a competitive edge in various games.
- Consider applying the included anti-slip stickers if you prefer a more secure grip, especially during long gaming sessions.
9. Warranty
This product comes with a 1-year limited warranty from the date of purchase, covering functional failures caused by non-human factors. Please retain your proof of purchase for warranty claims.
Figure 12: Warranty Information
10. Support
For further assistance, technical support, or warranty inquiries, please contact the seller or refer to the official Bloody website for detailed support resources.