Universal Remote RM-014S+

Contents

RM-014S+ Universal Remote Control Instruction Manual

For LCD/LED Televisions

1. Introduction

The RM-014S+ is a user-friendly universal remote control designed for a wide range of LCD and LED televisions. It features a reasonable button distribution and a simple layout for an enhanced user experience. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your RM-014S+ remote control.

Front view of the RM-014S+ universal remote control

Figure 1: RM-014S+ Universal Remote Control (Front View)

Front and back view of the RM-014S+ universal remote control

Figure 2: RM-014S+ Universal Remote Control (Front and Back View)

Video 1: RM-014S+ Product Overview

2. Getting Started

2.1 Battery Installation

The RM-014S+ remote control requires batteries (not included) to operate. To install batteries:

  1. Open the battery compartment cover on the back of the remote control.
  2. Insert the required batteries, ensuring correct polarity (+ and -).
  3. Close the battery compartment cover securely.

2.2 Setup Procedures

The RM-014S+ remote control offers multiple methods for setup to ensure compatibility with your TV. No programming is required for basic functionality, but for specific TV models, one of the following methods may be used:

Diagram showing 5 easy setup methods for the RM-014S+ remote control

Figure 3: Easy To Set Up Methods

  1. Setting with Brand:
    Press and hold the SET button and the POWER button simultaneously. Point the remote at your TV and repeatedly press the POWER button until the TV turns off. This method is compatible with brands such as LG, SONY, SAMSUNG, SHARP, Panasonic, TOSHIBA, PHILIPS, Hisense, TCL & KONKA, AOC, and other brands.
  2. Set up with Code:
    Press and hold the SET button and a 3-digit code (0-9) corresponding to your TV brand. Point the remote at your TV and press the POWER button until the TV turns off. (Specific codes are usually provided in a separate code list, not included here).
  3. One-click Search:
    Press and hold the SET button and the POWER button simultaneously. Point the remote at your TV and press the POWER button until the TV turns off.
  4. One-to-one Search:
    Press and hold the SET button and the POWER button simultaneously. Point the remote at your TV and press the POWER button until the TV turns off.
  5. Automatic Search:
    Press and hold the SET button and the POWER button simultaneously. Point the remote at your TV and press the POWER button until the TV turns off.

After successful setup, test all functions to ensure full compatibility. If some functions do not work, try another setup method or code.

3. Operating Instructions

The RM-014S+ remote control provides comprehensive functionality for your LCD/LED TV. Ensure a clear line of sight between the remote and your TV's infrared receiver for optimal performance. The remote can effectively control infrared appliances within 8 meters.

Diagram illustrating the 8-meter long distance infrared control range of the remote

Figure 4: Long Distance Control (up to 8 meters)

3.1 Basic Functions

  • POWER: Turns the TV on or off.
  • MUTE: Mutes or unmutes the TV sound.
  • 0-9: Number buttons for direct channel selection.
  • VOL +/-: Adjusts the volume up or down.
  • CH +/-: Changes channels up or down.
  • MENU: Accesses the TV's main menu.
  • GUIDE: Displays the TV program guide.
  • SOURCE: Selects input sources (HDMI, AV, etc.).
  • OK: Confirms selections in menus.
  • Arrow Buttons (Up/Down/Left/Right): Navigates through menus and options.
  • EXIT: Exits the current menu or function.
  • RETURN: Returns to the previous screen.

3.2 Smart TV & Streaming App Hot Keys

The RM-014S+ includes dedicated hot keys for popular streaming applications, providing quick access to your favorite content.

Hand holding the RM-014S+ remote control, highlighting streaming app hot keys like Netflix and YouTube

Figure 5: Streaming APPs Hot Keys

  • Dedicated buttons for streaming services such as YouTube and Netflix.
  • Additional multimedia control buttons (Play, Pause, Fast Forward, Rewind) for media playback.

4. Maintenance

To ensure the longevity and optimal performance of your RM-014S+ remote control, follow these maintenance guidelines:

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
  • Battery Care: Replace batteries when the remote's response becomes slow or inconsistent. Remove batteries if the remote will not be used for an extended period to prevent leakage.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the remote control or subjecting it to strong impacts, as this can damage the internal circuitry.

5. Troubleshooting

If you encounter issues with your RM-014S+ remote control, refer to the following common problems and solutions:

  • Remote not responding:
    • Check if the batteries are inserted correctly with the right polarity.
    • Replace old batteries with new ones.
    • Ensure there is a clear line of sight between the remote and the TV's infrared receiver.
    • Verify that the remote is correctly programmed to your TV using one of the setup methods in Section 2.2.
  • Limited range or intermittent response:
    • Ensure the remote is within the effective operating range (up to 8 meters).
    • Check for any obstructions between the remote and the TV.
    • Replace batteries if they are low.
  • Specific buttons not working:
    • This might indicate a programming issue. Try re-programming the remote using a different setup method from Section 2.2.
    • Clean the remote's surface and buttons to ensure no debris is interfering with button presses.
  • Compatibility issues with certain TV brands (e.g., Telefunken):
    • While the RM-014S+ is a universal remote, some specific TV models or older/newer generations might require a more precise setup code or may have limited compatibility. Refer to any included code lists or try all available setup methods.

6. Specifications

The RM-014S+ Universal Remote Control is built with quality materials and features designed for reliable performance.

Diagram illustrating the internal chip function and features like long standby time, sensitivity, intelligent protection, and anti-corrosion

Figure 6: Chip Function and Features

Remote control with icons highlighting features: LCD/LED compatibility, SOP (Stable), Hard IC, Battery Memory, Smart TV

Figure 7: Key Features of RM-014S+

FeatureDescription
Model NumberRM-014S+ (L38D13AC803351)
Applicable UseTV (for LCD/LED TVs)
MaterialABS
Wireless CommunicationInfrared (IR)
Effective Control DistanceUp to 8 meters
Dimensions (L x W x H)21 cm x 5 cm x 2 cm
Weight0.13 kg
Key FeaturesLong Standby Time, Sensitive Response, Intelligent Protection, Anti-corrosion, Battery Memory, Stable Performance (SOP), Hard IC, Smart TV compatibility.
OriginMainland China
CertificationNone

7. User Tips

  • Line of Sight: Always ensure a direct line of sight between the remote control and your TV's infrared receiver for reliable operation.
  • Battery Replacement: For optimal performance, replace all batteries simultaneously with new ones when the remote starts to become unresponsive.
  • Compatibility Check: While this is a universal remote, specific TV brands or models (e.g., Telefunken) might require trying all available setup methods or consulting the seller for specific compatibility information.
  • Hot Keys: Utilize the dedicated streaming app hot keys for quick access to services like YouTube and Netflix.

8. Warranty and Support

For any warranty claims or technical support, please contact the original seller or retailer from whom you purchased the RM-014S+ Universal Remote Control. They will be able to provide specific details regarding warranty coverage and assistance with product-related inquiries.

© 2023 Universal Remote. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.