INMAS BS09

Contents

MZYMI BS09 Neckband Bluetooth 5.3 Headset

User Manual

1. Introduction

The MZYMI BS09 Neckband Bluetooth 5.3 Headset offers a truly wireless audio experience designed for comfort and performance. Featuring advanced Bluetooth 5.3 technology, ENC (Environmental Noise Cancellation) for clear calls, and HIFI sound quality, these earbuds are suitable for various activities including sports and daily use. The ergonomic design ensures a comfortable and secure fit, while its waterproof rating provides durability against the elements.

2. Package Contents

Please check the package for the following items:

  • 1 x MZYMI BS09 Bluetooth Earphones
  • 1 x Instruction Manual (this document)
  • 1 x USB Type-C Charging Cable

3. Specifications

Product Parameters Table

Figure 1: MZYMI BS09 Product Parameters

FeatureSpecification
ModelBS09
Bluetooth VersionV5.3
Earphone Battery Capacity160mAh
Charging VoltageDC5V
Weight≈25g
Microphone TypeOmnidirectional
Drive Unit≈10mm
Maximum Wireless Range≈10m
Battery Life (Play Duration)Up to 15 hours
Standby Time≈200 hours
Charging Duration≈2 hours
MaterialPVC, ABS, Silica Gel
WaterproofYes
Sound IsolatingYes
Impedance RangeUp to 32 Ω
Frequency Response Range20 - 20000 Hz
Sensitivity30 dB
Resistance32 Ω
Charging MethodType-C
FeaturesWaterproof, With microphone, Amazon Alexa Support, Apple Siri Support, Dual Connection, Playback Control
Active Noise-CancellationNo
Volume ControlYes
Control ButtonYes
Vocalism PrincipleDynamic
Support Memory CardYes

4. Setup

4.1. Charging the Headset

Before first use, fully charge your MZYMI BS09 headset. Use the provided Type-C charging cable to connect the headset to a power source (e.g., USB wall adapter, computer USB port).

Type-C Charging Interface

Figure 2: Type-C Charging Port

  • A full charge takes approximately 2 hours.
  • Once fully charged, the headset provides up to 15 hours of play duration and approximately 200 hours of standby time.

4.2. Bluetooth Pairing

To connect your MZYMI BS09 headset to a device:

  1. Ensure the headset is charged and powered on.
  2. Activate Bluetooth on your smartphone, tablet, or laptop.
  3. Search for available Bluetooth devices.
  4. Select "MZYMI BS09" from the list of devices.
  5. Once connected, the headset will indicate successful pairing (e.g., a voice prompt or LED indicator change).
  6. The headset will automatically reconnect to the last paired device when powered on and within range.

5. Operating Instructions

The MZYMI BS09 features multifunctional wire controls for easy operation. Refer to the diagram below for button layout and functions.

Multifunctional Wire Control Buttons

Figure 3: Headset Control Buttons

5.1. Music Mode

  • Play/Pause: Short press the multifunction key.
  • Volume Increase: Short press the Volume + button.
  • Volume Decrease: Short press the Volume - button.
  • Next Track: Long press the Volume + button for 2 seconds.
  • Previous Track: Long press the Volume - button for 2 seconds.
  • Voice Assistant (Siri/Google Assistant): Short press the multifunction key 3 times.

5.2. Call Mode

  • Answer/End Call: Short press the multifunction key.
  • Reject Call: Long press the multifunction button for 2 seconds.

6. Key Features

The MZYMI BS09 headset is engineered with several features to enhance your audio experience:

  • ENC Deep Noise Reduction: Built-in dual noise reduction system intelligently filters noise, reduces interference during calls, and makes communication clearer, providing a face-to-face communication experience.
ENC Deep Noise Reduction Diagram

Figure 4: ENC Call Noise Reduction

  • HIFI Sound Quality: Experience lossless original sound with delicate and pleasant audio. A professional tuning team ensures rich and detailed music through balanced high, medium, and low frequencies.
HIFI Sound Quality Features

Figure 5: HIFI Level Sound Quality

  • 10mm Diaphragm Unit: Equipped with a 10mm titanium ball top composite diaphragm unit, delivering delicate sound quality and powerful low-frequency effects.
10mm Diaphragm Unit Exploded View

Figure 6: 10mm Diaphragm Unit

  • New Bluetooth 5.3: The upgraded chip provides stronger performance with lower power consumption, faster transmission speeds, and a more stable connection.
Bluetooth 5.3 Chip Diagram

Figure 7: Upgraded Bluetooth 5.3 Chip

  • Magnetic Suction Design: Earbuds feature a magnetic design for convenient storage, preventing slipping, loss, and entanglement of wires.
Magnetic Suction Design

Figure 8: Magnetic Suction for Storage

  • Silicone Neck Suspension: Made from high-quality liquid silicone, the neckband is soft, comfortable, skin-friendly, and resistant to deformation. It allows for arbitrary bending and is lightweight for comfortable wear.
Silicone Neckband Material

Figure 9: High-Quality Liquid Silicone Neckband

  • Comfortable In-Ear Fit: The in-ear design with soft silicone ear caps ensures a comfortable and non-pressure wearing experience, preventing the earbuds from falling off during activities like running or sports.
Comfortable In-Ear Fit

Figure 10: Comfortable In-Ear Design

  • 15H Ultra-Long Endurance: Equipped with a high-performance built-in battery and low-power Bluetooth solution, the headset provides up to 15 hours of continuous playback on a single charge.
15 Hour Battery Life

Figure 11: Battery Life Overview

7. Maintenance

  • Cleaning: Regularly wipe the earbuds and neckband with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, store the headset in a cool, dry place. The magnetic suction design helps keep the earbuds together and prevents tangling.
  • Charging: Use only the provided Type-C cable or a certified equivalent for charging. Avoid overcharging or completely draining the battery for extended periods to prolong battery life.
  • Water Exposure: While waterproof, avoid prolonged submersion in water. Dry the headset thoroughly if it gets wet.

8. Troubleshooting

  • Cannot Power On: Ensure the headset is fully charged.
  • Cannot Pair: Make sure Bluetooth is enabled on your device and the headset is in pairing mode. If previously paired, try unpairing and re-pairing. Ensure the headset is within 10 meters of your device.
  • No Sound: Check the volume levels on both the headset and your connected device. Ensure the headset is properly paired.
  • Poor Call Quality: Ensure the microphone is not obstructed. The ENC feature helps, but extreme noise environments may still affect clarity.
  • Intermittent Connection: Move closer to your connected device. Avoid obstacles between the headset and the device. Ensure no other devices are interfering with the Bluetooth signal.

9. User Tips

  • For optimal sound quality and comfort, try different sizes of ear tips if available to find the best fit for your ears.
  • Keep the headset charged regularly, even if not used daily, to maintain battery health.
  • Utilize the magnetic suction feature for tangle-free storage when carrying the headset in a bag or pocket.
  • Familiarize yourself with the button controls for quick and easy access to music and call functions without needing to look at your device.

10. Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.