Introduction
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your BSMOOM Portable Car Jump Starter with 150PSI Air Pump. Please read this manual thoroughly before using the device.
The BSMOOM jump starter is a versatile emergency tool designed to jump-start vehicles with dead batteries, inflate tires, and serve as a portable power bank and emergency light source. It is suitable for a wide range of 12V vehicles and various inflatable items.
Package Contents
Verify that all items are present in your package:
- Portable Car Battery Jump Starter Pack
- Heavy-Duty Battery Clamps
- USB Type-C Charging Cable
- EVA Storage Case
- Pump Tube
- Air Nozzle x4
- User Manual (this document)
Specifications
| Feature | Specification |
|---|---|
| Brand Name | BIUBLE / BSMOOM |
| Peak Current (7000A model) | 7000 Amps |
| Peak Current (6000A model) | 6000 Amps |
| Voltage | 12 V |
| Battery Capacity (7000A model) | 26800 mAh |
| Battery Capacity (6000A model) | 21800 mAh |
| Battery Type | Lithium Polymer |
| Conversion Rate | 85%~90% |
| Number Of Built-in Batteries | 4 |
| External Testing Certification | CE |
| Special Features | Lighting, Warning Light, SOS Lighting, 150PSI Air Pump, Power Bank |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| USB Output | 5V/1A, 9V/2A, 12V/1.5A |
| LED Light Output | 400 Lumens |
| Compatible Engine Size (7000A) | All Gas Engines, up to 10.0L Diesel Engines |
| Compatible Engine Size (6000A) | All Gas Engines, up to 7.5L Diesel Engines |
Setup and Initial Charge
Before first use, ensure the jump starter is fully charged. Use the provided USB Type-C charging cable to charge the device. The LED smart screen will indicate the battery level.
Display Overview:
The display provides information on:
- Accurate Battery Level
- USB charging status (IN/OUT)
- Temperature Protection Lamp
- Bearing Temperature (-4°F / 140°F)
- Display values and error reminders
- Battery capacity indicator
- Selection for different tire types to inflate (car, motorcycle, bicycle)
- Unit of air pressure (PSI, BAR, KPA, Kg/cm²)
- Fan working indicator
- Charging other devices indicator
- Abnormal battery temperature warning
Operating Instructions
1. Jump Starting a Vehicle
- Open the car hood to access the vehicle battery.
- Connect the jump clamps to the jump starter tightly. Ensure a secure connection.
- Connect the black clamp to the battery negative terminal (-).
- Connect the red clamp to the battery positive terminal (+).
- The jump starter's display will show the voltage of the car battery, ensuring safety.
- Start the car engine.
- Once the car starts, immediately remove the clamps from the car battery to complete the operation.
This device is compatible with all 12V vehicles, including motorcycles (1.5L), small cars (2.5L), SUVs (3.5L), and pickup trucks (5.5L). The 7000A model supports up to 10.0L diesel engines, while the 6000A model supports up to 7.5L diesel engines.
2. Using the Air Pump (Tire Inflator)
- Press the OK button to turn on the machine.
- Press the M button to switch to the inflation function.
- Press the M button again to switch the inflate type of product to be inflated (car, motorcycle, bicycle, ball).
- Long press the M button for 5 seconds. Wait for the screen to flash, then continue to click the M button to switch to PSI, BAR, KPA, or KG/CM mode.
- Use the + and - buttons to set the required air pressure.
- After setting everything, long press the OK button for 4 seconds to start inflation.
The 150PSI air compressor can inflate a normal car tire from 27psi to 36psi in approximately 1 minute. It is suitable for various items including car tires, motorcycle tires, bicycle tires, and sports balls.
3. Using as a Power Bank
The jump starter features a USB output port (5V/1A, 9V/2A, 12V/1.5A) to charge your electronic devices. Simply connect your device using a compatible USB cable to the output port.
4. Using the LED Emergency Light
The device is equipped with a 400-lumen LED light with three modes: Illumination, Flash, and SOS.
- Press the OK button to turn on the machine.
- Press the Light button (often marked with a sun/star icon) to turn on the small light.
- Long press the Light button for 4 seconds to turn on the big light.
- While the big light is on, press the Light button to switch between constant light, slow flash (strobe), and fast flash (SOS) modes.
Note: Before turning on the big light, ensure the small light is off.
Maintenance
- Charging: For optimal performance and to extend battery life, fully charge the jump starter upon receipt and recharge it regularly every 2-3 months, even if not in use. This keeps the battery activated.
- Storage: Store the device in its EVA storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Temperature: The device is designed to operate in temperatures from -4°F to 140°F. Avoid exposing it to temperatures outside this range for prolonged periods.
Troubleshooting
- Q: The device is not charging or turning on.
- A: Ensure the USB Type-C charging cable is securely connected to both the device and a power source. Check if the power source is active. If the device has been stored for a long time, it might require a longer initial charge.
- Q: The car is not starting after connecting the jump starter.
- A:
- Check that the battery clamps are connected correctly (red to positive, black to negative) and securely to the car battery terminals.
- Ensure the jump starter has sufficient charge.
- Verify that the jump starter is properly connected to the jump clamps.
- If the car battery is severely depleted, it might take a few attempts or require waiting a minute after connecting before trying to start.
- If the car still doesn't start, there might be other issues with the vehicle's battery or starting system.
- Q: The air pump is not inflating.
- A:
- Ensure the device is turned on and the inflation function is selected.
- Check that the pump tube and air nozzle are securely attached to both the device and the item being inflated.
- Verify that the desired pressure is set and the inflation process has been initiated by long-pressing the OK button.
- Ensure the device has sufficient battery charge.
- Q: What is the peak current of this device?
- A: The 7000A model has a peak current of 7000 Amps, and the 6000A model has a peak current of 6000 Amps.
User Tips
- Always keep the jump starter charged, especially before long trips, to ensure it's ready for emergencies.
- Familiarize yourself with the different air nozzle attachments for various inflation needs (e.g., car tires, bicycle tires, sports balls).
- In cold weather, keep the jump starter in a warmer environment (e.g., inside the car cabin) until needed to maximize its performance.
- When jump-starting, always connect the clamps in the correct order (positive first, then negative) and remove them in reverse order (negative first, then positive) to prevent sparks.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.
Safety Information
- Read all instructions before use.
- Do not attempt to jump-start a frozen battery.
- Do not allow the red and black clamps to touch each other once connected to the jump starter.
- Do not expose the product to rain or moisture.
- Do not disassemble the product. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Use the product only for its intended purpose.
- Ensure proper ventilation when operating the air pump for extended periods.