JIKONG JK-B2A20S20P

Contents

JIKONG JK-B2A20S20P Smart Active Balance BMS User Manual

Model: JK-B2A20S20P

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the JIKONG JK-B2A20S20P Smart Active Balance Battery Management System (BMS). Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Product Overview

The JIKONG JK-B2A20S20P is an intelligent active balanced Battery Management System designed for Li-Ion, LiFePo4, and LTO batteries. It supports battery configurations from 8S to 24S, with voltage ranges of 24V, 48V, and 72V, and a continuous charge/discharge current of 200A. This SMART BMS features active balancing with a 2A balancing current, a common port for charge and discharge, and comprehensive protection functions including overcharge, over-discharge, overcurrent, and short circuit protection. It also offers rich communication interfaces such as RS485, CAN, and Bluetooth (BT) for monitoring and control via mobile app or PC software.

2. Specifications

The following table outlines the key technical specifications for the JIKONG JK-B2A20S20P BMS.

FeatureSpecification
ModelJK-B2A20S20P
BMS TypeLIFEPO4 Battery BMS, SMART BMS, Active Balanced BMS
Battery Strings8S-24S (Li-Ion, LiFePo4, LTO)
Charging Current200A (Continuous Charge Current)
Discharge Current200A (Continuous Discharge Current)
Maximum Discharge Current (MAX 2min)350A
Balance FunctionActive Balance (Full State On)
Balancing Current2A
Conductive Resistance in Main Circuit0.35mΩ
Charge and Discharge PortCommon Port BMS
Protection FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Quantity of Temperature Detection3 Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS phone
Other InterfacesRS485, CANBUS, HEAT
Size (mm)162*102*20mm
CertificationCE, FCC

Note: The data tolerance range for physical dimensions is ±2mm.

JIKONG Product Specifications Table
Figure 1: Detailed JIKONG Product Specifications Table.
JIKONG BMS Product Specification with Dimensions
Figure 2: Product dimensions of the JIKONG BMS (162mm x 102mm x 20mm).

3. Packing List

Please verify that all items are present in the package:

  • 1 x BMS unit
  • 1 x NTC cable (long 40cm)
  • 1 x Sampling line B (long 70cm)
  • 1 x Sampling line A (long 70cm)
JIKONG BMS Packing List with components
Figure 3: Contents of the JIKONG BMS package, including the BMS unit, NTC cable, and sampling lines A and B.

4. Installation and Wiring

Proper installation and wiring are crucial for the safe and correct operation of the BMS. Follow these steps carefully.

4.1 Wiring Instructions

  1. Connect all the balance cables to the battery cells.
  2. Insert the balance cable into the BMS.
  3. Connect the B- line (total negative electrode) and the P- line (total positive electrode) to the battery.
Wiring diagram for 16-string cells with JIKONG BMS
Figure 4: Wiring method for a 16-string cell configuration. This diagram shows connections for balance wires (B1-B16, NTC), B- (total negative electrode), and P- (total positive electrode) to the BMS, and then to the battery, inverter, charger, and motor load.
Wiring diagram for 24-string cells with JIKONG BMS
Figure 5: Wiring method for a 24-string cell configuration. This diagram illustrates connections for balance wires (B1-B24, NTC), B- (total negative electrode), and P- (total positive electrode) to the BMS, and then to the battery, inverter, charger, and motor load.

4.2 BMS Interface Overview

The JIKONG BMS features multiple interfaces to support various functionalities and communication modes.

JIKONG BMS interface overview with labeled ports
Figure 6: Overview of the BMS interfaces, including RS485/CAN, NTC, GPS, Display/Switch, and Hot (heating) ports, along with Sampling port A and B.
  • RS485/CAN: For communication with external devices and inverters.
  • NTC: For temperature sensor connection.
  • GPS: For GPS module connection (if applicable).
  • Display/Switch: For connecting external display units or control switches.
  • Hot: For heating element control (if applicable).
  • Sampling Port A & B: For connecting the provided sampling lines to the battery pack.

5. Operation

The JIKONG BMS offers intelligent interaction and easy operation through its mobile app, PC software, or optional dedicated display units.

5.1 Mobile App and PC Software

The "JIKONG SMART BMS" mobile app (available for iOS, Android, and HarmonyOS) and PC software allow for comprehensive monitoring and adjustment of BMS parameters.

  • Multi-screen display, data connection: The mobile app provides a clear overview of battery voltage, current, temperature, SOC (State of Charge), alarms, and cycle counts.
  • Intelligent interaction: Freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance. Refer to the internal parameters of the protection board before making changes.
  • Multi-language support: The app supports multiple languages which can be switched automatically with the mobile phone system.
JIKONG BMS Mobile App and PC Software interfaces
Figure 7: Examples of the mobile app, PC software, and JIKONG home storage display interfaces for monitoring and control.
JIKONG BMS Mobile App showing detailed battery data
Figure 8: Detailed view of the JIKONG SMART BMS mobile app displaying voltage, current, temperature, SOC, alarms, and cycle information.
JIKONG BMS PC software interface for settings and monitoring
Figure 9: The PC software interface for the JIKONG BMS, showing real-time data, settings, control options, logging, and fault information.

5.2 Inverter Communication

The BMS supports various mainstream inverter communication protocols, allowing for seamless integration with different inverter brands.

JIKONG BMS inverter communication protocols and app setup
Figure 10: Supported CAN protocols for inverter communication, including Deye, Pylontech, Growatt, Victron Energy, INVT, Goodwe, SMA, and Srne. The mobile app allows easy setup of these protocols.

Supported CAN Protocols include:

  • Low-voltage hybrid inverter CAN communication protocol
  • PYLON CANBUS Protocol V1.2
  • Growatt xxSxxP ESS Protocol V2.01
  • CAB-BUS_BMS_Protocol_201707
  • INVT BMS CAN Bus protocol V1.02
  • GoodWe LV BMS Protocol (CAN) V1.7 (for ES/EMG-BP Series)
  • FSS-ConnectingBat-TI-en-10 | Version 1.0
  • PACE BMS Modbus Protocol for RS485
  • MUST PV1800F-CAN communication protocol

5.3 Active Balancing

The BMS features intelligent active balancing technology to efficiently balance cell voltage differences and improve battery performance and lifespan.

Table showing excellent balance effect of JIKONG BMS
Figure 11: Comparison of cell voltage differences before and after active balancing, demonstrating a significant reduction in voltage deviation (e.g., from 0.639V to 0.01V for a 16-section 100AH series battery).

6. Maintenance

The JIKONG BMS is designed for durability and high performance with minimal maintenance. However, regular checks and proper handling will ensure its longevity.

6.1 General Care

  • Keep the BMS clean and free from dust and debris.
  • Ensure proper ventilation around the unit to aid in heat dissipation.
  • Avoid exposing the BMS to extreme temperatures or direct sunlight for prolonged periods.

6.2 Physical Durability

The BMS features a fully enclosed aluminum alloy shell, providing excellent dustproof and waterproof capabilities, as well as anti-voltage and anti-vibration properties. Internal high-strength insulating material further protects components from vibration and external pressure.

JIKONG BMS with dustproof and waterproof features
Figure 12: Illustration highlighting the dustproof, waterproof, anti-voltage, and anti-vibration features of the JIKONG BMS due to its fully enclosed aluminum alloy shell.
Exploded view of JIKONG BMS showing internal components and cooling
Figure 13: Exploded view of the JIKONG BMS, showing the cooling aluminum alloy casing, MOS transistors, Jikong MCU, NTC, and sampling lines A and B, all contributing to high-efficiency performance and heat dissipation.

7. Troubleshooting

This section provides guidance on common issues you might encounter with your JIKONG BMS.

7.1 Common Issues and Solutions

  • No power/BMS not turning on:
    • Check all wiring connections, especially the main B- and P- lines, and the balance wires. Ensure they are securely connected.
    • Verify the battery voltage is within the operational range for the BMS (8S-24S).
  • Balancing not occurring or ineffective:
    • Ensure the active balance function is enabled in the mobile app or PC software settings.
    • Check the balance wire connections for any loose or incorrect wiring.
    • Allow sufficient time for balancing, especially for large capacity batteries or significant cell voltage differences.
  • Communication issues (Bluetooth/RS485/CAN):
    • For Bluetooth, ensure the BMS is powered on and within range. Re-pair the device if necessary.
    • For RS485/CAN, verify the physical connections and ensure the correct protocol is selected in the software.
    • Check for any interference from other electronic devices.
  • Overcharge/Over-discharge protection triggering prematurely:
    • Review the protection parameters in the mobile app or PC software. Ensure they are set appropriately for your battery type and application.
    • Check individual cell voltages to identify any weak cells that might be triggering protection.
  • Overcurrent/Short circuit protection triggering:
    • Ensure the load connected to the battery does not exceed the continuous or peak current ratings of the BMS.
    • Inspect for any short circuits in the wiring or connected components.
    • Adjust overcurrent detection delay if necessary, but exercise caution.

7.2 Error Codes/Indicators

The mobile app and PC software will display detailed error messages or fault indicators. Consult the software interface for specific diagnostic information.

8. User Tips

  • Initial Setup: Always connect the balance wires to the battery cells before connecting the main power leads (B- and P-) to the BMS. This prevents potential damage from voltage spikes.
  • Parameter Adjustment: When adjusting protection parameters via the app or PC software, make small, incremental changes and monitor the battery behavior closely. Incorrect settings can lead to battery damage or system malfunction.
  • Firmware Updates: Periodically check for firmware updates for your BMS and app. Updates often include performance improvements, bug fixes, and new features.
  • Temperature Monitoring: Utilize the NTC temperature sensors to monitor battery temperature, especially during high charge/discharge cycles, to prevent overheating.
  • Data Logging: Take advantage of the data logging features in the app/software to track battery performance over time, which can help in diagnosing issues and optimizing usage.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG Official Store directly through your purchase platform or their official website.

Manufacturer: Chengdu Jikong Technology Co., Ltd.

Chengdu Jikong Technology Co., Ltd. has mastered four core technologies of active balance power battery management system: active balance, wireless transmission, functional safety, and capacity management. Jikong Technology adheres to the business philosophy of "pursuing product details, assisting environmental protection, and harvesting beautiful sky", and writes a new chapter in the electric vehicle industry, contributing its own strength to the cause of environmental protection!

The company has a strong development team covering areas such as product research and development, engineering design, and testing and verification. At the same time, Jikong Technology will invest no less than 10% of its sales revenue into technology research and development. The core research and development team comes from multiple world-renowned electrical companies and the automotive electronic components industry, possessing advanced professional knowledge and management experience.

© 2024 JIKONG Official Store. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.