MiLESEEY H6C

Contents

H6C Electric Bike LCD Display Meter User Manual

Model: H6C | Brand: MiLESEEY

Introduction

Thank you for choosing the MiLESEEY H6C Electric Bike LCD Display Meter. This horizontal mid-mounted VA color LCD display features high-definition full lamination technology, offering an agile, three-dimensional, and spacious display. This manual provides essential information for the proper installation, operation, and maintenance of your display meter.

Package Contents

  • 1 x H6C LCD Display Meter

Note: Due to different batches, there may be minor differences in the appearance, color, and printing of the product, which does not affect its functionality.

Setup and Installation

1. Mounting the Display

The H6C display is designed for horizontal mid-mounting on your electric bike or scooter handlebars. Ensure a secure fit using the provided brackets.

  • Applicable Handlebar Sizes: 22.2mm, 25.4mm, 28.6mm, 31.8mm.
Rear view of H6C display mounted on handlebars, showing mounting brackets and cable connection.
Rear view of the H6C display, illustrating the mounting brackets and cable routing.

2. Electrical Connection

Connect the display to your electric bike/scooter's controller using the 5-PIN UART communication interface. Ensure the connector is firmly seated.

  • Communication Protocol: UART
  • Connector Type: 5PIN
  • Voltage Compatibility: 24V/36V/48V/60V (adjustable)
Front view of H6C display showing the screen and a detailed inset of the 5-pin green connector.
The H6C display with an inset showing the 5-pin connector for UART communication.

Operating Instructions

The H6C display provides comprehensive information and control over your electric bike/scooter's functions:

  • Battery Indicator: Shows the current battery charge level.
  • Headlight Control: Activates and deactivates the vehicle's headlights.
  • Boost Function: Provides a temporary power boost.
  • Boost Gear: Adjusts the level of power assistance.
  • Speed Display: Shows current riding speed (km/h or mph).
  • Mileage Display: Displays subtotal trip mileage and total accumulated mileage.
  • Running Time: Tracks the duration of your ride.
  • Metric Conversion: Allows switching between metric and imperial units.
  • Fault Prompt: Displays error codes or warnings for system issues.

USB Charging

The display features a USB port for charging external devices.

  • USB Output: 5V/500mA
Side view of the H6C display showing the integrated USB charging port.
Side view of the H6C display, highlighting the USB charging port.
H6C display showing a speed of 40 km/h, battery level, voltage, and PAS level, with an e-scooter in the background.
The H6C display in operation, showing key riding data.

Maintenance

To ensure the longevity and optimal performance of your H6C display meter, follow these maintenance guidelines:

  • Keep the display clean using a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Ensure all connections are secure and free from corrosion.
  • Protect the display from direct sunlight and extreme temperatures when not in use.
  • Avoid exposing the display to heavy rain or submerging it in water.

Troubleshooting

Issue Possible Cause Solution
Display not powering on Loose connection, no power from battery, faulty display/controller. Check all cable connections, ensure battery is charged and connected. If issues persist, consult a technician.
No communication/Incorrect readings Loose UART connection, incompatible protocol, sensor issue. Verify the 5-PIN UART connection. Ensure the display is compatible with your controller's communication protocol.
Speed limited to 25 km/h (or other value) Programmable speed limit setting (P-settings). Refer to the detailed parameter settings (P1-P20) in the full product manual or consult your e-bike/scooter manufacturer for instructions on adjusting speed limits.
Fault prompt displayed System error detected by the controller. Note the fault code and refer to your e-bike/scooter's main manual for specific fault code meanings and troubleshooting steps.

Specifications

Feature Detail
Model H6C
Display Type Horizontal mid-mounted VA color LCD
Dimensions (LxWxH) 116.1mm x 71.3mm x 22.8mm
Communication UART (5PIN connector)
Voltage 24V/36V/48V/60V (adjustable)
USB Charging Output 5V/500mA
Applicable Handlebar Size 22.2mm/25.4mm/28.6mm/31.8mm
Material Plastic
Color Black

User Tips

  • Parameter Settings: For advanced settings like speed limits (P-settings) or other customizable parameters (P1-P20), refer to the comprehensive manual provided with your e-bike/scooter or contact the manufacturer. These settings are crucial for optimizing performance and complying with local regulations.
  • Connectivity Check: If you experience issues with the display communicating with your e-bike/scooter, always double-check the 5-PIN UART connection for proper seating and any visible damage.
  • Voltage Adjustment: Ensure the display's voltage setting (24V-60V) matches your e-bike/scooter's battery system for accurate readings and proper operation.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided by your retailer or the manufacturer of your electric bike/scooter. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.