1. Product Overview
This Homcom 48W Ceiling Fan combines modern design with practical functionality, featuring an integrated LED light and convenient remote control. Its sleek black finish and MDF blades add elegance to any room. Designed for comfort and efficiency, it offers three fan speeds, a long-lasting LED light, and a reversible airflow function for year-round use.


2. Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician.
- Do not attempt to repair or modify the fan yourself. Contact qualified personnel for service.
- Ensure the mounting structure can support the weight of the fan.
- Keep hands and objects clear of the fan blades when in operation.
- This appliance is for indoor use only.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly.
- 1 x Ceiling Fan with LED Light
- 1 x Remote Control (includes 23A/12V battery)
- 1 x Instruction Manual
- All necessary installation accessories
4. Setup and Installation
Assembly is required. It is recommended to have a second person assist with installation due to the size and weight of the unit. Ensure the ceiling is capable of supporting the fan's weight.
4.1 Pre-Installation Checks
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Verify all parts listed in Section 3 are present.
- Ensure the power supply to the installation area is turned off at the circuit breaker.
4.2 Mounting the Fan
The fan is designed for ceiling heights between 2.6-3 meters and suitable for spaces up to 16m².

- Securely attach the mounting bracket to the ceiling junction box. Use appropriate hardware for your ceiling type.
- Connect the electrical wiring from the ceiling to the fan motor. Follow local electrical codes and the wiring diagram provided in the full instruction manual.
- Carefully lift the fan motor assembly and attach it to the mounting bracket.
- Install the MDF blades onto the motor housing. Ensure they are securely fastened.
- Attach the LED light module and the glass cover.
4.3 Remote Control Setup
The remote control comes with a 23A/12V battery included. Insert the battery into the remote control if not already installed, ensuring correct polarity.
5. Operating Instructions
The ceiling fan and LED light are operated using the included remote control, which has a range of up to 10 meters.

5.1 Fan Operation
- On/Off: Press the power button (1) to turn the fan on or off.
- Speed Control: Use the speed buttons (2) to select between High (HI), Medium (MED), and Low (LOW). Press 'STOP' to turn off the fan blades.
- Timer Function: Press the timer buttons (3) to set the fan to turn off automatically after 1 hour (1H), 2 hours (2H), 4 hours (4H), or 8 hours (8H).
5.2 LED Light Operation
- Light On/Off: Press the light button (4) to turn the LED light on or off. The LED light provides 4000K white illumination and has a lifespan of approximately 50,000 hours.

5.3 Reversible Airflow Function
The fan features a reversible airflow function, allowing for optimal comfort in both warm and cool seasons.

- Summer Mode (Forward Airflow): Blades rotate counter-clockwise, pushing cool air downwards to create a refreshing breeze. This makes cold air flow faster.
- Winter Mode (Reverse Airflow): Blades rotate clockwise, drawing air upwards to circulate warm air trapped near the ceiling, distributing it throughout the room. This heats the air in the lower part of the room.
To change the direction of airflow, locate the reverse switch on the fan motor housing (usually a small slide switch). Ensure the fan is completely stopped before changing the direction.
6. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your ceiling fan.
- Cleaning: Dust the fan blades and motor housing regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
- Light Cover: The glass light cover can be removed for cleaning. Wash with mild soap and water, then dry thoroughly before reattaching.
- Remote Control Battery: Replace the 23A/12V battery in the remote control when its range decreases or it stops responding.
- Blade Balance: If the fan wobbles, check that all blade screws are tight and that the blades are not bent or damaged.
7. Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply Remote control battery dead Loose wiring connection | Check circuit breaker Replace remote control battery Verify all wiring connections are secure (ensure power is off) |
| Light does not work | No power supply Loose wiring connection | Check circuit breaker Verify light wiring connections (ensure power is off) |
| Fan wobbles | Loose blade screws Unbalanced blades Loose mounting bracket | Tighten all blade screws Check for bent or damaged blades; use a balancing kit if necessary Ensure mounting bracket is securely fastened |
| Remote control not responding | Dead battery Out of range Interference | Replace battery Move closer to the fan Ensure no obstructions or strong signals interfering with RF |
8. Specifications
Detailed technical specifications for the Homcom 48W Ceiling Fan.

| Feature | Detail |
|---|---|
| Model Reference | B31-390BK |
| Color | Black |
| Material | Metal, MDF, and Glass |
| Total Measurements (D x H) | Ø112 x 25 cm (44 x 9.8 inches) |
| Single Blade Measurements (L x W) | 53 x 12.4 cm (20.9 x 4.9 inches) |
| Power Cord Length | 30 cm (11.8 inches) |
| Remote Control Range | 10 m (32.8 ft) |
| Suitable Ceiling Height | 2.6 - 3 m (8.5 - 9.8 ft) |
| Suitable Space Area | Up to 16 m² (172 sq ft) |
| Noise Level | 45 dB (Silent) |
| Voltage | 230 V / 50 Hz |
| Power | 48 W |
| LED Light Color Temperature | 4000K White |
| LED Lifespan | Approx. 50,000 hours |
| Remote Control Battery | 23A/12V (included) |
| Certifications | CE (EMC, ROHS, LVD, ERP, RED) |
9. User Tips
- Optimal Airflow: For best cooling in summer, ensure the fan is rotating counter-clockwise. In winter, switch to clockwise rotation to help distribute warm air.
- Remote Control Placement: Keep the remote control in an easily accessible location, away from direct sunlight or extreme temperatures.
- Energy Saving: Utilize the timer function to turn off the fan and light automatically when not needed, saving energy.
- Quiet Operation: The fan is designed for silent operation (45 dB). If you notice unusual noise, refer to the troubleshooting section.
10. Warranty and Support
For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.