UGREEN CM561/217

Contents

UGREEN HDMI Switch User Manual

Models: CM561 (HDMI 2.1) / CM217 (HDMI 2.0)

Brand: UGREEN

1. Introduction

Thank you for choosing the UGREEN HDMI Switch. This device allows you to connect multiple HDMI source devices to a single HDMI display, or a single HDMI source device to multiple HDMI displays (one at a time). It supports high-resolution video and audio transmission, enhancing your entertainment and productivity experience.

UGREEN HDMI 2.1 Switch 8K 60Hz 2 in 1 Out
UGREEN HDMI Switch, available in HDMI 2.1 (8K 60Hz) and HDMI 2.0 (4K 60Hz) versions.
Comparison table of HDMI 2.1 and HDMI 2.0 versions
Comparison of UGREEN HDMI Switch versions: HDMI 2.1 supports up to 8K@60Hz, 4K@144Hz, 1080P@240Hz; HDMI 2.0 supports up to 4K@60Hz, 1080P@120Hz. Both are bi-directional 2-in-1-out or 1-in-2-out.

2. Setup Instructions

Follow these steps to connect your UGREEN HDMI Switch:

  1. Identify Ports: The switch has two input/output HDMI ports (INPUT1, INPUT2) and one output/input HDMI port (OUTPUT for 2-in-1-out mode, or INPUT for 1-in-2-out mode). The HDMI 2.1 version (CM561) also features a USB-C port for power supply.
  2. Connect Source Devices (2-in-1-out mode): Connect your HDMI source devices (e.g., PS5, Xbox, Laptop, TV Box) to the INPUT1 and INPUT2 ports on the switch using HDMI cables.
  3. Connect Display Device (2-in-1-out mode): Connect your HDMI display device (e.g., TV, Monitor, Projector) to the OUTPUT port on the switch using an HDMI cable.
  4. Connect Source Device (1-in-2-out mode): Connect your HDMI source device to the OUTPUT port on the switch.
  5. Connect Display Devices (1-in-2-out mode): Connect your HDMI display devices to the INPUT1 and INPUT2 ports on the switch.
  6. Power Supply (CM561 HDMI 2.1 version only): For the CM561 model, connect a USB-C power cable to the USB-C port on the switch and to a 5V power adapter (not included) or a USB port on your display/source device. This is crucial for stable 8K/4K@120Hz performance.
HDMI 2.1 Switch connection diagram
Connection diagram for UGREEN HDMI 2.1 Switch. Top: 2 Input Devices to 1 Output Display. Bottom: 1 Input Device to 2 Output Displays (note: only one display can be active at a time).
Example connection with PS5 and Apple TV
Example of connecting multiple input devices (PS5, Apple TV) to the HDMI switch for output to a single TV.
Example connection with laptop and projector
Example of connecting a single input device (laptop) to the HDMI switch for output to a projector or monitor.

3. Operating Instructions

The UGREEN HDMI Switch features a simple one-button operation:

  1. Switching Inputs/Outputs: Press the circular button on the top of the switch to cycle between the connected HDMI sources or displays.
  2. Indicator Lights: LED indicators on the switch will illuminate to show which input/output port is currently active.

Important Note: In 1-in-2-out mode, only one display can be active at a time. The switch does not support simultaneous display on two monitors.

One-button switch on the HDMI device
The central button allows for easy one-click switching between connected devices.

4. Maintenance

  • Keep the device in a dry, cool place, away from direct sunlight and high temperatures.
  • Avoid exposing the device to water or other liquids.
  • Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

5. Troubleshooting

No Signal / Black Screen:
  • Ensure all HDMI cables are securely connected to both the source devices, the switch, and the display.
  • Verify that the correct input is selected on your display device.
  • For the CM561 (HDMI 2.1) model, ensure the USB-C power cable is connected and providing sufficient power.
  • Try using shorter, high-quality HDMI cables, especially for 8K or 4K@120Hz resolutions.
  • Test with different HDMI cables or source devices to isolate the problem.
Flickering / Unstable Picture:
  • Check HDMI cable quality and length. Longer cables or lower quality cables may struggle with high resolutions/refresh rates.
  • Ensure the USB-C power is connected for the CM561 model.
  • Reduce the resolution or refresh rate on your source device to see if the issue persists.
Cannot display on two monitors simultaneously:
  • This switch is designed to output to one display at a time, even in 1-in-2-out mode. To switch between displays, press the button on the device. It is not an HDMI splitter for simultaneous output.
Audio Issues:
  • Ensure your display device's audio settings are correctly configured.
  • Verify that the HDMI cable supports audio transmission.

6. Specifications

6.1. UGREEN HDMI 2.1 Switch (Model: CM561)

Specifications for UGREEN HDMI 2.1 Switch Model CM561
Detailed specifications and dimensions for the UGREEN HDMI 2.1 Switch (CM561).
FeatureDescription
Product NameUGREEN HDMI 2.1 Switch
ModelCM561
Resolution Support8K@60Hz, 4K@120Hz, 4K@144Hz, 1080P@240Hz Max
ChipsetsPI3HDX12221 + EN8F156S14
Function2-in-1-out & 1-in-2-out (Bi-directional)
Power SupplyUSB-C (5V)
Case MaterialPC + Aluminum Alloy Shell
PackageUGREEN Retail Box
Dimensions48mm (W) x 64mm (L) x 15mm (H)
Transmission Speed48 Gbps
Audio Format SupportLPCM, PCM, DTS, DSD, Dolby AC/2.0/5.1/7.1, DTS-HD, Dolby-TrueHD
Additional FeaturesDolby Vision & Audio, 3D, CEC, HDR, VRR, AMD Free-Sync, G-Sync
System CompatibilityWindows 10/8.1/8/7, MAC OS, Linux

6.2. UGREEN HDMI 2.0 Switch (Model: CM217)

Specifications for UGREEN HDMI 2.0 Switch Model CM217
Detailed specifications and dimensions for the UGREEN HDMI 2.0 Switch (CM217).
FeatureDescription
Product NameUGREEN HDMI 2.0 Switch
ModelCM217
Resolution Support4K@60Hz, 1080P@120Hz Max
ChipsetsTS3DV642 + ENF202
Function2-in-1-out & 1-in-2-out (Bi-directional)
Case MaterialPC + ABS Case
PackageUGREEN Retail Box
Dimensions51mm (W) x 51.6mm (L) x 13.5mm (H)

7. User Tips

  • For optimal performance, especially with high resolutions like 8K@60Hz or 4K@120Hz, use certified HDMI 2.1 cables.
  • When using the CM561 (HDMI 2.1) model, always connect the USB-C power cable to ensure stable operation and full resolution support.
  • Remember that in 1-in-2-out mode, the switch will only display to one monitor at a time. Use the button to select which display is active.

8. Warranty and Support

UGREEN products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.