Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your DEKO 3/4HP 4600GPH Submersible Sump Pump. This high-capacity pump is designed to effectively remove standing water from basements, cellars, garden ponds, and other flooded areas, ensuring your property remains dry.

Figure 1: DEKO 3/4HP 4600GPH Sump Pump
Safety Instructions
WARNING: Failure to follow these safety instructions may result in electric shock, fire, or serious injury.
- Always read the instruction manual thoroughly before use.
- This pump is intended for water use only. Do not use the pump for flammable or explosive liquids.
- Ensure the power supply is properly grounded to prevent electrical hazards.
- Do not use the pump if the power cord is damaged. Inspect the cord regularly for any signs of wear or damage.
- The sump pump has not been investigated for use in swimming pool areas.
- Never lift or move the pump by the power cord. Always use the integrated handle or a rope tied to the handle for transport.
- Always disconnect the pump from the power supply before performing any maintenance or cleaning.
Product Overview
Components

Figure 2: Key Components of the Sump Pump
- Vertical Float Switch: Automatically activates and deactivates the pump based on water level.
- Stainless Steel Motor Housing: Provides durability and corrosion resistance.
- 3/4 HP Motor: Powerful motor for high-capacity pumping.
- 1-1/2" NPT Discharge: Standard connection for water output.
- Glass Reinforced Thermoplastic Impeller: Corrosion-resistant and designed for efficient water movement.
- Integrated Handle: For easy carrying and positioning of the pump.
- Top Suction Strainer Filter: Prevents air locks and clogging from debris.
Features
- High-Capacity Pumping: Moves up to 4600 gallons per hour (GPH) and lifts water up to 29.5 feet vertically.
- Automatic Operation: Integrated vertical float switch ensures automatic on/off functionality.
- Durable Construction: Features a stainless steel motor housing, cast iron volute, and glass-reinforced thermoplastic impeller for long-lasting performance and corrosion resistance.
- Anti-Clogging Design: The top suction strainer filter eliminates air locks and prevents clogging from debris at the bottom of the sump pit.
- Portable Design: Equipped with an integrated handle for easy transport.
- Ultra Quiet Operation: Designed for minimal noise during use.
- Energy-Saving: Efficient motor design reduces power consumption.

Figure 3: Internal Components and Features
Specifications
| Specification | Value |
|---|---|
| Model | DSSP750C1-US |
| Power | 3/4 HP |
| Max Flow Rate | 4600 GPH (17413 L/H) |
| Max Lift Height (Head) | 29.5 ft (9m) |
| Rated Voltage | 110V~60Hz |
| Current | 5.1A |
| Motor Type | Single phase, oil filled |
| Discharge Size | 1-1/2" NPT |
| Switch-On Water Level | 9.45 inches |
| Switch-Off Water Level | 2.4 inches |
| Power Cord Length | 10 ft |
| Construction Materials | Stainless steel motor housing, Cast iron volute, Glass reinforced thermoplastic impeller |
| Certification | CE |
Performance Chart

Figure 4: Pump Performance Data

Figure 5: Technical Data and Features
Setup
- Placement: Position the sump pump in the lowest point of the area to be drained. Ensure the pump is on a stable, level surface.
- Float Switch Clearance: It is crucial to ensure the vertical float switch can move freely without any obstruction or contact with the sides of the basin or pit. This ensures proper automatic operation.
- Discharge Connection: Connect a 1-1/2" NPT discharge hose or pipe to the pump's outlet. Ensure all connections are secure and watertight to prevent leaks.
- Power Connection: Once the pump is securely placed and the discharge line is connected, plug the 10ft power cord into a properly grounded 110V~60Hz electrical outlet.

Figure 6: Automatic Operation and Float Switch Levels
Operating Instructions
The DEKO Sump Pump operates automatically via its integrated vertical float switch:
- When the water level rises above approximately 9.45 inches, the float switch will activate the pump, and it will begin to drain water.
- When the water level drops below approximately 2.4 inches, the float switch will automatically disconnect the power, and the pump will stop operating.
No manual intervention is typically required during normal operation, provided the float switch has adequate clearance.
Maintenance
Regular maintenance ensures the longevity and efficient operation of your sump pump.
- Inspect Power Cord: Periodically check the power cord for any cuts, fraying, or damage. Replace immediately if damaged.
- Clean Strainer Filter: The top suction strainer filter helps prevent clogging. Regularly inspect and clean the filter to remove any accumulated debris. The utility pump includes a removable screen for easy cleaning.
- Check Float Switch: Ensure the float switch moves freely and is not obstructed by debris or the sump pit walls. Test its operation by manually lifting it to ensure the pump activates.
- Clear Debris: Keep the sump pit free of excessive dirt, gravel, or other debris that could interfere with pump operation or clog the impeller.

Figure 7: Key Features for Maintenance
Troubleshooting
If your sump pump is not operating as expected, consider the following common issues:
- Pump does not turn on: Check if the pump is plugged in and receiving power. Verify that the float switch is not obstructed and can rise to the 'on' level. Check for tripped circuit breakers.
- Pump runs continuously: Ensure the float switch is not stuck in the 'on' position or obstructed, preventing it from falling to the 'off' level. Check for leaks into the sump pit that might keep the water level high.
- Pump runs but no water is discharged: Check if the discharge hose is kinked, blocked, or frozen. Ensure the impeller is not clogged with debris. Verify that the water level is high enough for the pump to prime.
- Pump is excessively noisy: This could indicate debris in the impeller, a loose component, or the pump running dry. Disconnect power and inspect for obstructions.
For persistent issues, consult a qualified technician.
User Tips
- Regular Testing: Periodically test your sump pump by pouring water into the sump pit to ensure the float switch activates the pump and it drains effectively. This is especially important before heavy rain seasons.
- Float Switch Position: Always double-check that the float switch has ample space to move up and down freely. Any restriction can prevent the pump from turning on or off automatically.
Warranty and Support
The DEKO 3/4HP 4600GPH Sump Pump comes with a 2-year promise, ensuring quality and reliability.

Figure 8: DEKOPRO 2 Years Promise
For technical assistance, warranty claims, or further inquiries, please contact DEKO customer support through your purchase platform or the official DEKO website.