1. Product Overview
The HORACO ZX-SWTGW2C48NS is a 12-port 10 Gigabit Ethernet Smart Managed Switch designed for high-speed network transmission and communication applications. Adopting a store-and-forward method, this switch provides stable and reliable data transmission. It supports web management, making configuration and maintenance convenient for various applications, including security network video surveillance, hotels, campuses, and small to medium-sized enterprise network engineering.

Figure 1: HORACO 10G Web Managed Switch
1.1. Port Description
The switch features a combination of RJ45 and SFP+ ports for versatile connectivity:
- 4 x 100M/1G/2.5G/5G/10G Adaptive RJ45 Ports (Ports 1-4)
- 8 x 10Gb SFP+ Optical Ports (Ports 5-12)
The front panel includes indicators and controls:
- PWR (Power Indicator): Always on when equipment is energized. No light indicates the device is not energized.
- SYS (System Light): Always on when the system is normal. Flashing indicates the system is booting.
- Reset Button: Long press for 6 seconds to restore factory settings.
The rear panel includes:
- Grounding Screw
- AC100-240V Power Input

Figure 2: Front and Rear Panel Port Description
1.2. LED Status Description
The LED indicators provide visual feedback on the switch's status:
| Indicator | Status | Meaning |
|---|---|---|
| Power | ON | Device powered on |
| Network (Link/Act) | Flashing | Data transmission in progress |
2. Package Contents
Please check the package carefully to ensure all items are included and undamaged:
- Switch x1
- Instruction Manual x1
- Certificate of Compliance x1
- Power Cord x1 (Specific plug type may vary, see Figure 3)
- Rack Ears: a Pair

Figure 3: Adaptable Power Plug Types (US, EU, UK, AU)
If any item is missing or damaged, please contact your seller immediately.
3. Setup (Installation Instructions)
3.1. Step 1: Check Equipment
Confirm that all accessories listed in the package contents are present and that the switch itself is undamaged.
3.2. Step 2: Connect Power
Connect the supplied power adapter or power cable to the AC power input port on the rear of the switch and then to a suitable power outlet.
3.3. Step 3: Connect Network Cable
Use standard Ethernet cables (Cat5e/Cat6 or higher for optimal performance) to connect the uplink port(s) of the switch to your router, another switch, or your network source.
3.4. Step 4: Connect Terminal Devices
Connect your compatible network devices to the available RJ45 or SFP+ ports on the switch. Compatible devices include:
- Routers
- Wireless Access Points (APs)
- Computers (PCs, Workstations)
- Network Attached Storage (NAS) devices
- Servers
- IP Cameras
- Gaming Devices

Figure 4: Example Network Setup
3.5. Step 5: Verify Device Status
After connecting power and network cables, check the LED indicators on the front panel to confirm the device is operating normally (Power LED ON, Network Link/Act LEDs flashing for active connections).
3.6. Flexible Installations
The switch comes standard with 1U rack ears, allowing for installation in a standard 1U rack. It can also be used as a desktop mount, offering flexibility for various engineering and home office scenarios.

Figure 5: Rack Mount Installation
4. Operating
This switch supports advanced network management features accessible via a web-based interface.
4.1. Web Network Management
The switch features a comprehensive web network management function, allowing for device configuration, monitoring, and troubleshooting through a standard web browser. This includes:
- System Information: View device status, firmware version, and network parameters.
- Port Configuration: Manage port speed, duplex mode, and flow control.
- VLAN Configuration: Create and manage Virtual Local Area Networks (VLANs) to segment your network.
- LACP Configuration: Set up Link Aggregation Control Protocol for increased bandwidth and redundancy.

Figure 6: Web Management Interface Overview
4.2. Network Management Functions
The switch supports various advanced functions to deal with complex networking scenarios:
- QoS (Quality of Service): Prioritize network traffic for critical applications.
- SNMP (Simple Network Management Protocol): Monitor network devices from a central management station.
- Port Mirroring: Copy network traffic from one port to another for analysis.
- IGMP (Internet Group Management Protocol): Optimize multicast traffic.
- VLAN (Virtual Local Area Network): Support 802.1Q VLAN for flexible network segmentation, preventing network storms and adapting to multi-device applications.
- LACP (Link Aggregation Control Protocol): Bundle multiple physical links into a single logical link to increase bandwidth and improve reliability through dynamic backup.

Figure 7: Network Management Functions

Figure 8: LACP Link Aggregation

Figure 9: VLAN Segmentation
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your switch.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the switch. Do not use liquid cleaners or aerosol sprays.
- Ventilation: Ensure that the ventilation openings are not blocked during operation. The switch features a metal housing with an active cooling fan and heat sink for efficient heat dissipation.
- Environment: Operate the switch within the specified environmental requirements (temperature and humidity) to prevent damage.

Figure 10: Metal Housing with Heat Sink and Cooling Fan
6. Troubleshooting
If you encounter issues with your switch, refer to the following common problems and solutions:
6.1. Problem: Device does not power on
Solution:
- Check that the power cable is securely connected to both the switch and the power outlet.
- Verify that the power outlet is functional.
- Ensure the power supply used is compatible with the switch's requirements (AC 100-240V).
6.2. Problem: No network connection
Solution:
- Verify that Ethernet cables are securely connected to both the switch and the connected devices.
- Check the Link/Act LEDs on the switch for the respective ports; they should be lit or flashing.
- Ensure the network configuration (IP addresses, subnet masks) on connected devices is correct.
- Try using a different Ethernet cable to rule out cable issues.
7. Specifications
Detailed technical specifications for the HORACO ZX-SWTGW2C48NS switch:
| Feature | Specification |
|---|---|
| Model | ZX-SWTGW2C48NS |
| Product Name | 12 Port 10GbE Smart Managed Ethernet Switch |
| Port Definition | 4 x 10G RJ45 Ports, 8 x 10G SFP+ Optical Ports |
| Chipset | RTL9313+RTL8264B |
| Network Standard | IEEE 802.3, 802.3u, 802.3ab, 802.3bz, 802.3z, 802.3ae, 802.3x |
| Transmission Rate | 10/100/1000/2500/10000 Mbps |
| Switch Capacity (Backplane Bandwidth) | 240Gbps |
| Packet Forwarding Rate | 178.56Mpps |
| MAC Address Table | 32K |
| Packet Cache | 16Mbit |
| VLAN Range | 1-4094 (Max active VLANs: 4K) |
| PoE Standard | Non-PoE |
| Power Input | AC 100-240V / 50-60Hz |
| Power Supply Power | 12V4A |
| Mainboard Power Consumption | 45.83W |
| Working Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% ~ 90% (non-condensing) |
| Storage Humidity | 5% ~ 95% (non-condensing) |
| Installation | 1U Rack Mount, Desktop Mount |
| Bare Machine Weight | 1.59KG |
| Finished Weight | 2.16KG |
| Product Size (LxWxH) | 320 x 207 x 45mm |
| Package Size (LxWxH) | 370 x 290 x 85mm |
| Lightning & Surge Protection | Port Surge: 4KV, Static: 6KV, Power Lightning: 4KV |

Figure 11: Lightning and Surge Protection
8. Safety Information
Please read the following safety instructions carefully before use to prevent injury or damage to the device:
- Do not disassemble, repair, or modify the product without authorization.
- Keep the product away from water, fire, and corrosive substances.
- Disconnect power before cleaning or maintenance.
- Use only compatible power supplies and accessories.
- Keep the product out of reach of children.
- Stop using the product immediately if overheating, smoke, or unusual odor occurs.
- Avoid dropping, striking, or applying strong impact to the device.
- Indoor use only (unless otherwise specified).
- Do not expose the product to rain, water, or humid environments.
- Use within the rated voltage and power specifications.
- Do not block ventilation openings during operation.
- Avoid installation near high-temperature environments or heat sources.
- Do not use damaged power cables or accessories.
9. Warranty and Support
HORACO provides a 2-year free warranty and lifetime professional technical support for this product. For further assistance, please refer to the official product documentation or contact HORACO customer support.
A PDF version of the user manual may be available for download at: User Manual (PDF)
10. User Tips
- Placement: The switch features an active cooling fan and can generate some noise and heat. Consider placing it in a well-ventilated area, such as a server rack or a dedicated network cabinet, where fan noise will not be a disturbance.
- Web Interface: Users have found the web management interface to be user-friendly, making configuration tasks straightforward.
- Physical Size: The switch is slightly wider than some might expect, so ensure you have adequate space for installation. Rack ears are included for convenient rack mounting.
11. Frequently Asked Questions (FAQ)
Q: Is the fan loud?
A: Some users have noted that the fan can be a bit noisy. This is typical for active cooling solutions in high-performance network equipment. Consider placement in a less noise-sensitive environment if this is a concern.
Q: Does this come with a US plug?
A: The product typically adapts to various power cord specifications. As shown in Figure 3, it supports US, EU, UK, and AU plug types, so the appropriate plug for your region should be included or adaptable.