1. Introduction
This manual provides detailed instructions for the XGP X10 Motorcycle Intercom Headset and Clip Set. This accessory set is designed specifically for the XGP X10 Bluetooth intercom interphone, featuring a Type-C jack plug. It serves as a convenient backup or replacement for motorcyclists who use multiple helmets, eliminating the need to transfer the main intercom unit's headset and clips between helmets.
Important Notes:
- The main XGP X10 intercom unit (walkie-talkie) is NOT included in this accessory set.
- This accessory set is exclusively designed for XGP X10 intercom units and is not compatible with other brands.
2. Package Contents
Please verify that all items are present in your package:
- 40mm Hi-Fi Speaker (with Type-C jack plug)
- Boom Microphone
- Button Microphone
- Metal Mounting Bracket
- 3M Sticker Bracket
- Speaker Pads
Note: Some packages may contain a combination of these items, such as "Headphone" (speakers and one microphone), "Clip" (mounting brackets), or "Headphone and Clip" (speakers, one microphone, and mounting brackets). Please check your specific order details.
3. Specifications
| Feature | Detail |
|---|---|
| Model Name | XGP X10 |
| Item Type | Helmet Headset Accessories |
| Speaker Diameter | 40mm Hi-Fi |
| Jack Type | Type-C |
| Applicable Helmet Types | Half Helmet, Full Face, Flip-up, Open Face, Motocross, Power Sports helmets |
| Compatibility | Exclusively for XGP X10 Intercom units |
| Item Weight | 0.1kg |
| Certification | CE |
| Origin | Mainland China |
4. Setup and Installation
This section guides you through installing the headset and mounting brackets into your helmet.
4.1. Choosing a Mounting Bracket
The XGP X10 accessory set includes two types of mounting brackets:
- Metal Mounting Bracket: Provides a secure, clamp-style attachment to the helmet's edge.
- 3M Sticker Bracket: Offers a strong adhesive attachment for helmets where clamping is not feasible or preferred.
4.2. Installing the Mounting Bracket
For Metal Mounting Bracket:
- Loosen the screws on the metal bracket.
- Slide the bracket onto the edge of your helmet, ensuring it is positioned securely.
- Tighten the screws to firmly attach the bracket to the helmet.
For 3M Sticker Bracket:
- Clean the desired mounting area on your helmet thoroughly with an alcohol wipe and let it dry completely.
- Peel off the protective backing from the 3M adhesive on the bracket.
- Press the bracket firmly onto the cleaned area of the helmet for at least 30 seconds.
- Allow the adhesive to cure for at least 24 hours before attaching the intercom unit.
4.3. Installing Speakers and Microphones
- Attach the speaker pads to the back of the 40mm Hi-Fi speakers.
- Carefully place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for optimal sound quality.
- Choose either the Boom Microphone (for open-face or flip-up helmets) or the Button Microphone (for full-face helmets).
- Route the microphone cable along the helmet's interior lining to the front.
- Position the microphone close to your mouth, ensuring it is not obstructed by padding or the helmet's visor.
- Connect the Type-C jack plug from the speaker/microphone assembly to the Type-C port on your XGP X10 intercom unit.
5. Operating Instructions (for XGP X10 Intercom Unit)
This section outlines the basic operations of the XGP X10 intercom unit when connected to these accessories. Refer to the main XGP X10 intercom manual for comprehensive details.
5.1. Quick Button Commands
- Jog Dial: Rotate clockwise for Volume Up, counter-clockwise for Volume Down.
- Play Forward Button: Tap once for Next Song.
- Play Backward Button: Tap once for Previous Song.
- Mesh Button (M): Used for Mesh Intercom functions.
- Power Button: Used for Power On/Off, Pairing, and Phone Call functions.
- Charging/Headset Type-C Port: For connecting the headset accessories and charging.
5.2. Basic Functions
- Power On: Hold Power button for 2 seconds. Blue light flashes, voice prompt "Power on".
- Power Off: Hold Power button for 3 seconds. Red light goes out, voice prompt "Power off".
- Battery Prompts:
- Below 50%: Voice prompt "Power is lower than 50%".
- Below 10%: Voice prompt "Power is lower than 10%", then powers off.
- Charging:
- Use a 5V 1A adapter.
- Use the provided cable for charging.
- Full charging time is approximately 2 hours.
- Factory Reset: Hold Power button for 3 seconds (from Power Off status). Red and blue lights flash, voice prompt "Factory Reset". After reset, power off and restart. The power button will flash red and blue alternately, allowing direct Bluetooth connection without re-entering pairing mode.
5.3. Phone Call Functions
- Connect Phone (Pairing):
- Ensure X10 is powered off.
- Hold Power button for 4 seconds. Red and blue lights flash, voice prompt "pairing".
- On your phone, search for Bluetooth device "X10" and connect. Voice prompt "connected", blue light blinks.
- Answer Call: Tap Power button once (during incoming call).
- End Call: Tap Power button once (during a call).
- Reject Call: Hold Power button for 1 second (during incoming call).
- Enable Auto-answering: Hold Power button for 3 seconds. Voice prompt "enable auto answer". (Factory default is "No auto answering").
- Disable Auto-answering: Hold Power button for 3 seconds. Voice prompt "disable auto answer".
- Activate Voice Call (Siri/Google Assistant): Tap Power button twice. Speak commands to your phone.
5.4. Music Functions
- Play/Pause Music: Tap Power button once.
- Next Song: Tap Play Forward button once.
- Previous Song: Tap Play Backward button once.
- Volume Adjustment: Rotate Jog Dial clockwise for volume up, counter-clockwise for volume down.
- A "du" tone indicates volume adjustment. "di" for max volume, "du" for min volume.
- Audio Multitasking: If intercom talk and music are simultaneous, rotate Jog Dial to adjust music volume. Pause music to adjust intercom volume.
- Music Sharing:
- Ensure two X10 units are Mesh connected.
- Tap Mesh button twice on both units. Voice prompt "Share Me Enable".
- To Disable Music Sharing: Tap Mesh button twice on both units. Voice prompt "Share Me Disable".
Note: Music sharing works best for rider and passenger with two X10 units.
5.5. Mesh Intercom Functions
- Turn On Mesh Intercom: Tap Mesh button once on each intercom unit. Green light flashes quickly, voice prompt "intercom mesh on". After 5 seconds, solid green light is ON, voice prompt "N mesh devices connected" (N is number of connected devices, up to 10).
- Turn Off Mesh Intercom: Tap Mesh button twice. Voice prompt "Intercom mesh off". Green light is OFF.
- Exit Mesh Intercom: Tap Mesh button once. Green light flashes every 2 seconds. (Other devices remain connected).
- Recover Mesh Intercom: Tap Mesh button once. Solid green light ON.
- Automatic Reconnection: If a unit goes out of range and disconnects, it will automatically reconnect if it returns to the mesh group within 5 minutes. Otherwise, tap the Mesh button again to rejoin.
5.6. Universal Pairing (2-Way Bluetooth Intercom)
To connect with other brand intercoms or XGP intercoms of different styles:
- Ensure both X10 and the other intercom are powered on.
- Hold Power button on X10 for 3 seconds (and put the other brand intercom into its pairing mode). Red and blue lights flash, voice prompt "searching".
- Once connected, the blue light on X10 will flash slowly, and voice prompt "device is connected".
- To start a talk: Tap Power button once on both units.
- To end a talk: Tap Power button once on both units.
6. Maintenance
- Cleaning: Wipe the headset and clips with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the accessories in a dry place away from extreme temperatures.
- Charging: Always use a 5V 1A adapter and the original charging cable to prevent damage to the intercom unit. Ensure the Type-C port is clean and free of debris before charging or connecting the headset.
7. Troubleshooting
- Issue: Intercom unit not pairing with phone.
- Solution: Perform a factory reset (see Section 5.2) and then attempt to pair again. Ensure the X10 is in pairing mode (red and blue lights flashing) and your phone's Bluetooth is on.
- Issue: Music sharing not working.
- Solution: Ensure both X10 units are successfully Mesh connected before attempting music sharing. This feature is optimized for rider-to-passenger use between two X10 units.
- Issue: Intercom connection drops frequently.
- Solution: Check if units are within range. If a unit disconnects and returns within 5 minutes, it should auto-reconnect. Otherwise, manually tap the Mesh button to rejoin the group.
- Issue: Sound quality is poor or distorted.
- Solution: Ensure speakers are correctly positioned over your ears and the microphone is close to your mouth and not obstructed. Check that the Type-C jack is fully inserted into the intercom unit.
- Issue: Accessories do not fit other intercom brands.
- Solution: This accessory set is designed exclusively for the XGP X10 intercom unit and is not compatible with other brands due to proprietary connections and designs.
8. User Tips
- Consider purchasing an additional headset and clip set if you frequently switch between multiple helmets. This saves time and wear on the components.
- Always ensure the Type-C jack is fully and securely plugged into the XGP X10 intercom unit for reliable performance.
- Familiarize yourself with the quick button commands, especially the Jog Dial for volume control and the Mesh button for intercom functions, to operate the device safely while riding.
9. Warranty and Support
For further assistance, detailed user manuals, or warranty information, please use the following resources:
- Official User Manual (PDF): A comprehensive user manual in PDF format is available for download. View User Manual (PDF)
- Email Support: XGPTX2023@163.com
- YouTube Channel: @XGPTX
- Instagram: @xgpmoto