Laser Tree K20 Pro

Contents

LASER TREE K20 Pro 20W Optical Power Laser Module User Manual

For CNC Engraver and Cutting Tools

1. Introduction

The LASER TREE K20 Pro is a high-performance 20W optical power laser module designed for precision engraving and cutting with CNC machines. Utilizing advanced 4-beam compressed technology, it integrates four 5W laser diodes to deliver a powerful and stable laser beam. This module features built-in air assist and a dual-fan cooling system for enhanced cutting performance and extended service life. It also includes a 40mm fixed focus lever and an anti-blue light view window for user convenience and safety.

2. Safety Information

  • Eye Protection: Always wear appropriate laser safety goggles (OD4+ or higher) when operating the laser module. The blue laser light can cause severe eye damage.
  • Ventilation: Ensure adequate ventilation in your workspace to dissipate fumes and smoke generated during engraving and cutting. Some materials can produce toxic fumes.
  • Fire Hazard: Laser cutting and engraving can ignite flammable materials. Always supervise the machine during operation and have a fire extinguisher readily available.
  • Material Compatibility: Do not engrave or cut unknown materials. Certain plastics and other materials can produce hazardous gases or catch fire easily.
  • Children and Pets: Keep children and pets away from the laser machine during operation.
  • Power Off: Disconnect power before performing any maintenance, adjustments, or cleaning.
  • Temperature Alarm: The module is equipped with an over-temperature alarm. If the working temperature exceeds 55°C, an alarm will sound. Address the cause of overheating immediately.

3. Package Contents

The LASER TREE K20 Pro laser module package typically includes the following components:

  • Laser module *1
  • Driver adapter *1
  • Sliding plate *1
  • 2mm L-wrench *1
  • Power supply (24V 5A) *1
  • 1.5m Air tube *1
  • Spare protective lens *1
  • 80cm Input cable *1
LASER TREE K20 Pro package contents
Figure 3.1: Typical package contents for LT-K20-Pro.

4. Specifications

FeatureSpecification
Brand NameLaser Tree
Model NumberK20 Pro (20W Laser Head)
Output Optical Power18W-22W (Nominal 20W)
Electric Power24V 4A
Wavelength450nm (±10nm)
Light ColorBlue
Spot FormPunctiform, Adjustable focus
Focus Length40mm
MaterialAluminum alloy & Copper
Module Size64x66x134mm
Module Weight587g
ControllerCNC USB
Is Smart DeviceYes
CertificationCE
FeatureAir Assist
Power AdjustableTTL/ PWM/ Analog Modulation
Cable3PIN 80CM
Fan Speed6000rpm
FunctionEngraving/ Cutting
Operating Temperature0~60℃
Compatible withVarious 12V 24V models of DIY laser engraver cutter

Air Pump Specifications (LT-AP-MP56)

ProductVoltageCurrentFlowPressureEnvironmental TemperatureEnvironmental Humidity
Air pumpDC24V950mA≥26L/min≥28kPa-20°C ~ 40°C< 90%
LASER TREE K20 Pro Specifications Table
Figure 4.1: Detailed specifications for the K20 Pro laser module.
Air Pump Product Parameters
Figure 4.2: Product parameters for the optional air pump.

5. Setup and Installation

Follow these steps to install your LASER TREE K20 Pro laser module:

  1. Mount the Laser Module: Securely attach the laser module to your CNC machine's carriage using the provided sliding plate and screws. Ensure it is firmly in place to prevent movement during operation.
  2. Connect Air Assist Tube: Connect the 1.5m air tube to the air assistance port on the side of the laser module. If using an external air pump, connect the other end of the tube to the pump.
  3. Connect Cables: Connect the 3PIN 80cm input cable to the input port (24V/GDN/PWM) on the laser module and to your CNC controller. Connect the power supply to the driver adapter and then to a power outlet.
  4. Fixed Focus Adjustment: The K20 Pro features a 40mm fixed focus. Use the fixed focus lever to adjust the laser height relative to your material. For cutting, place the fixed focus plate on the material and adjust the laser module until the lever touches the plate.
Video 5.1: Installation process and cutting demonstration of the K20 Pro laser module.
K20 Pro Laser Module Components Diagram
Figure 5.2: Detailed view of K20 Pro components and ports.
40MM Fixed Focus Laser Module Diagram and Usage Reference
Figure 5.3: Diagram illustrating the 40mm fixed focus lever and its usage for different material thicknesses.

Fixed Focus Lever Usage Reference

Material ThicknessFixed Focus Lever Setting
< 5mm0mm
5mm2mm
8mm4mm
10mm5mm
12mm6mm
≥ 15mm7mm

6. Operating Instructions

6.1. 4-Beam Compressed Technology

The K20 Pro module integrates four 5W laser diodes, compressing their beams into a single powerful 20W+ output. This technology enhances cutting and engraving efficiency and precision.

4-Beam Compressed Technology Diagram
Figure 6.1: Illustration of the 4-beam compressed technology.

6.2. Cutting and Engraving Performance

The K20 Pro offers powerful cutting and engraving capabilities across various materials. Always perform test cuts on scrap material to determine optimal settings for your specific material and desired outcome.

Powerful Cutting Ability Examples
Figure 6.2: Examples of cutting capabilities for various materials.
  • 15mm Pine Wood: Can be cut in one pass.
  • 5mm MDF: Can be cut in one pass.
  • 12mm Black Acrylic: Can be cut in one pass.
  • 12mm Plywood: Can be cut in one pass.

6.3. Speed and Effect Comparison

The K20 Pro offers significantly faster engraving speeds and improved cutting effects compared to previous 10W modules and the standard K20 model.

Super Fast Engraving Speed Comparison
Figure 6.3: Engraving speed comparison, showing K20 Pro is approximately 2 times faster than a 10W module.
Engraving Effect Comparison K20 vs K20 Pro
Figure 6.4: Visual comparison of engraving effects between K20 and K20 Pro, highlighting improved detail with K20 Pro.
Cutting Speed Comparison K20 vs K20 Pro
Figure 6.5: Table comparing cutting speeds for K20 and K20 Pro across various materials and thicknesses.

6.4. Air Assist Function

The built-in air assist system helps achieve cleaner cuts and improves overall cutting performance by blowing away debris and cooling the cutting area. This prevents charring and produces smoother edges.

Built-in Air Assist & Dual Fan Cooling Design Diagram
Figure 6.6: Diagram showing the integrated air assist and dual-fan cooling system.
With Air Assist VS No Air Assist Comparison
Figure 6.7: Visual comparison of cutting results with and without air assist.

6.5. Temperature Display & Alarm

The module features a working temperature display and an alarm function. Excessive working temperatures can reduce the lifespan of the laser head. If the working temperature exceeds 55°C, an audible alarm will activate, indicating a need to check cooling or reduce workload.

Temperature Display & Alarm Function
Figure 6.8: Illustration of the temperature display and alarm function.

6.6. Protective Cover Design

The new protective cover design, made with anti-blue light optical glass, effectively filters blue light during engraving or cutting, providing eye protection. This allows for safer observation of the laser's operation.

New Protective Cover Design
Figure 6.9: The new protective cover design for eye safety.

6.7. Compatible Materials

The K20 Pro laser module is suitable for engraving and cutting a wide range of materials, including but not limited to:

  • Ceramics
  • Wood (Pine board, Plywood, Basswood)
  • Felt
  • Metal (Engraving only, not cutting)
  • Leather
  • Stainless steel (Engraving only)
  • Food
  • MDF
  • Stone (Engraving only)
  • Bamboo
  • Acrylic
  • Glass (Engraving only)
More Creative Display - Various Available Materials
Figure 6.10: Examples of various materials that can be processed with the laser module.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your laser module.

  • Lens Cleaning: Periodically clean the protective lens to ensure clear laser transmission. Use a soft, lint-free cloth and lens cleaning solution. Replace the spare protective lens if the current one is damaged or heavily soiled.
  • Cooling System: The dual-fan cooling system requires occasional inspection. Ensure the fan vents are clear of dust and debris to maintain efficient heat dissipation. Clean with compressed air if necessary.
  • Air Assist Nozzle: Keep the air assist nozzle clean to prevent blockages that could reduce its effectiveness.
  • General Cleaning: Keep the exterior of the laser module clean and free of dust and material residue.

8. Troubleshooting

  • Laser Not Firing: Check all cable connections (power, signal). Ensure the power supply is working and the module is receiving power. Verify software settings for laser output.
  • Weak Laser Output/Poor Cuts: Re-check the focus adjustment using the fixed focus lever. Clean the protective lens. Ensure the air assist is functioning correctly. Verify power settings in your software.
  • Overheating Alarm: If the temperature alarm sounds, stop operation immediately. Check if the fan vents are blocked. Allow the module to cool down. Reduce laser power or cutting speed for demanding tasks.
  • Inconsistent Engraving/Cutting: Ensure the material is flat and securely held. Check for any loose connections or mechanical play in the CNC machine's gantry. Verify consistent power supply.

9. User Tips

  • Test Settings: Always perform small test cuts or engravings on scrap material before starting a large project. This helps fine-tune speed, power, and focus settings for optimal results.
  • Material Knowledge: Research the properties of different materials before processing them. This helps in selecting appropriate laser settings and understanding potential hazards.
  • Software Proficiency: Familiarize yourself with your CNC control software (e.g., LightBurn) to effectively manage laser parameters and optimize your workflow.
  • Air Assist Benefits: Utilize the air assist feature for all cutting operations to achieve cleaner edges and reduce charring. It also helps protect the laser lens from smoke and debris.
  • Regular Cleaning: A clean laser module and workspace contribute significantly to consistent performance and longevity.

10. Warranty and Support

LASER TREE products are designed for quality and reliability. For warranty information, technical support, or service inquiries, please refer to the official LASER TREE website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.