1. Introduction
The JIKONG BMS JK-PB2A16S15P is an advanced Battery Management System designed for LiFePo4, Li-Ion, and LTO battery packs, supporting configurations from 8S to 16S for 24V and 48V systems. It features a 150A continuous charge/discharge current and a 2A active balancer, making it suitable for household energy storage, home inverters, and various power applications. This BMS offers robust protection features and intelligent monitoring capabilities to ensure battery longevity and safe operation.

2. Package Contents
Before installation, please verify that all components listed below are present in your package:

- BMS x 1
- Interface board x 1
- Adapter cable B x 1 (long 30cm)
- Adapter cable A x 1 (long 30cm)
- R545 Network cable x 1 (long 40cm)
- Sampling line A x 2 (long 90cm)
- Sampling line B x 1 (long 90cm)
- Sampling line C x 1 (long 90cm)
- Switch x 1 (long 50cm)
- Adapter cable C x 1 (long 30cm)
- Heating Adapter cable x 1 (long 15cm)
- Adapter x 1
3. Setup and Installation
Careful installation and wiring are crucial for the safe and proper functioning of your BMS. Please follow these steps precisely:
3.1 Wiring Instructions
- Connect all the cables to their respective ports on the BMS.
- Insert the main cable into the BMS.
- Connect the B-line (battery negative) and the P-line (load/charger negative) to the battery pack.
- Important Note: If there are two B8 cables, only the first B8 line needs to be connected. The second B8 cable should not be connected.

3.2 Interface Board Connections
The interface board provides various communication and control ports:

- P1 Port: Connects to the interface board.
- Sampling Line Ports 1-4: For cell voltage monitoring.
- Heat Function Port: For connecting heating elements (if applicable).
- Display or Switch Port: For external display or control switch.
- RS485-2 Interface: For RS485 communication.
- BPBC RJ45 Socket: For specific communication protocols.
- RS232 Interface: For RS232 communication.
- 6P6C RJ11 Socket: Another communication port.
- CAN Interface: For CAN bus communication.
- Dry Interface: For dry contact connections.
- Dial Switch: For configuration settings.
- Switch: General purpose switch.
4. Operation
The JIKONG BMS offers intelligent interaction and easy operation through various interfaces.
4.1 Mobile APP and PC Software
Monitor and manage your battery system in real-time using the dedicated mobile APP (JIKONG BMS) or PC software. The APP supports iOS, Android, and HarmonyOS operating systems.

The monitoring interfaces provide comprehensive data including:
- Voltage
- Current
- Temperature
- State of Charge (SOC)
- Alarms
- Charge/Discharge Cycles
4.2 Inverter Communication Protocols
The BMS is compatible with mainstream inverter communication protocols, allowing for seamless integration into home energy systems. Protocols can be set up via the mobile APP or host computer software.

Supported CAN Protocols include:
- Low-voltage hybrid inverter CAN communication protocol
- PYLON CANBUS Protocol V1.2
- Growatt xxSxxP ESS Protocol V2.01
- CAB-BUS_BMS_Protocol_201707
- INVT BMS CAN Bus protocol v1.02
- GoodWe LV BMS Protocol (CAN) V1.7 (For ES/EM/S-BP/BP Series)
- FSS-ConnectingBat-TI-en-10 | Version 1.0
- PACE BMS Modbus Protocol for RS485

The PC software allows for free adjustment of multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance. Always refer to the internal parameters of the protection board before making changes.
5. Maintenance
The JIKONG BMS is designed for durability and long life, featuring active balancing to prolong battery health. Regular monitoring through the mobile APP or PC software is the primary maintenance activity.
5.1 Active Balancing
The BMS employs real-time active energy transfer equalization with a supercapacitor as the medium, achieving a continuous balanced current of up to 2A. This significantly improves battery consistency and delays aging.

5.2 Component Quality
The BMS is built with high-quality components, including a high-performance MCU, low internal resistance MOS, and cooling aluminum alloy heat sinks to ensure reliability and reduce temperature rise.

6. Troubleshooting
This section provides guidance for common issues. For complex problems, please contact JIKONG support.
- System Shutdown: The BMS includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection. If the system unexpectedly shuts down, check the battery voltage, current draw, and temperature via the mobile APP or PC software to identify if a protection limit has been triggered. Address the underlying cause (e.g., reduce load, charge battery).
- Balancing Issues: If cell voltages are not balancing as expected, ensure all sampling lines are securely connected and undamaged. Verify the balance current setting in the software.
- Communication Problems: If the mobile APP or PC software cannot connect to the BMS, check Bluetooth connectivity, USB/RS485/CAN cable connections, and ensure the correct communication protocol is selected.
- Incorrect Readings: Ensure all wiring, especially the sampling lines, are correctly installed according to the wiring diagrams. Loose connections can lead to inaccurate voltage readings.
7. Specifications
The following table details the technical specifications for the JIKONG BMS JK-PB2A16S15P:

| Technical Index | JK-PB2A16S15P |
|---|---|
| Number of Battery Strings (Li-ion) | 7-16S |
| Number of Battery Strings (LiFePo4) | 8-16S |
| Number of Battery Strings (LTO) | 14-16S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 2A |
| Conductive Resistance in Main Circuit | 0.4mΩ |
| Continuous Discharge Current | 150A |
| Maximum Discharge Current (MAX 2min) | 300A |
| Over Charge Protection Current (ADJ) | 10-150A |
| Other Interfaces [Default] | RS485/232/CAN |
| Wiring Output | Common Port |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Current Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 4 |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/IOS/Harmony |
| Parallel charging current limiting | 10A |
| Address dial switch | 4 |
| DRY Contact | 2 |
| Certification | CE, FCC |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Type | LIFEPO4 Battery BMS |
8. User Tips
- Optimize Battery Life: The active balance feature significantly contributes to battery durability and extends its overall lifespan. Ensure it is always enabled for optimal performance.
- Real-time Monitoring: Regularly use the mobile APP or PC software to monitor your battery's status. This allows for early detection of potential issues and proactive management.
- Versatile Compatibility: This BMS is designed to work with various battery chemistries, including LiFePo4, Ternary Lithium, and Lithium Titanate. Ensure your battery type is correctly configured in the system settings.
- Parallel Expansion: The integrated 10A current limiting module supports parallel connection of multiple battery packs, allowing for safe and easy system expansion.
9. Warranty and Support
The JIKONG BMS JK-PB2A16S15P is manufactured by JIKONG. For specific warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact JIKONG customer service directly. Ensure you have your product model and purchase details ready when seeking support.