1. Introduction
Thank you for choosing the Homcom Electric Mica Radiator. This silent heater is designed to provide quick and efficient warmth to your living spaces. Featuring advanced mica panel technology, it heats up rapidly and dissipates heat effectively. This manual provides essential information for the safe and optimal use of your new heater, including setup, operation, maintenance, and safety guidelines.
2. Safety Information
Please read all safety warnings and instructions carefully before using this appliance to prevent injury or damage.
- Always place the heater on a firm, level surface.
- Ensure the heater is kept away from flammable materials such as curtains, furniture, and bedding.
- Do not cover the heater at any time, as this can lead to overheating and fire hazards.
- Keep children and pets away from the heater, especially when it is in operation.
- Do not operate the heater with a damaged cord or plug.
- Unplug the heater when not in use or before cleaning.
- This heater is equipped with an anti-overheating system that automatically shuts off the device in case of excessive temperature.
- A protection mesh is integrated to prevent direct burns from touching the heating elements.
- The heater includes a tip-over switch that will automatically turn off the unit if it is accidentally knocked over.

3. Package Contents
Please check the package contents upon unboxing to ensure all components are present:
- 1 x Homcom Electric Mica Radiator Unit
- 4 x Swivel Wheels
- Mounting Hardware for Wheels (screws, etc.)
- 1 x Instruction Manual
4. Specifications
| Feature | Detail |
|---|---|
| Model | 820-296V90WT |
| Brand | HOMCOM |
| Color | White |
| Material | PP, Steel, Mica |
| Total Measurements (LxWxH) | 79 cm x 27 cm x 54 cm |
| Coverage Area | 15-20 m² |
| Input Voltage | 220-240 V / 50 Hz |
| Power Levels | 1000W / 2000W |
| Power Cable Length | 1.5 m |
| Certifications | CE (EMC, LVD, ROHS, ERP) |
| Net Weight | Approximately 5.5 kg |
| Package Dimensions (LxWxH) | 82 cm x 13 cm x 53 cm |


5. Setup
The Homcom Electric Mica Radiator requires minimal assembly, primarily attaching the swivel wheels for portability.
5.1 Attaching the Wheels
- Carefully unbox the heater and all components.
- Turn the heater upside down on a soft, stable surface to avoid scratching the unit.
- Locate the mounting points for the wheels on the base of the heater.
- Attach each of the four swivel wheels to the designated mounting points using the provided hardware (screws). Ensure they are securely fastened.
- Once all wheels are attached, carefully turn the heater upright.

Your heater is now ready for placement and operation. The swivel wheels allow for easy movement from one room to another.
6. Operating Instructions
The heater features two power levels and an adjustable thermostat for customized heating.
6.1 Powering On/Off
- Ensure the heater is plugged into a suitable 220-240V / 50Hz power outlet.
- Locate the power control knob on the side of the unit.
- Turn the power control knob to 'I' for 1000W heating or 'II' for 2000W heating. The power indicator light will illuminate.
- To turn off the heater, turn the power control knob to '0'.
6.2 Adjusting Temperature
- Once the desired power level is selected, use the thermostat control knob to set the desired room temperature.
- Rotate the knob clockwise to increase the temperature setting and counter-clockwise to decrease it.
- The heater will cycle on and off to maintain the set temperature.

7. Maintenance
Regular cleaning will help maintain the efficiency and lifespan of your heater.
7.1 Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water or liquids enter the interior of the heater.
- Do not immerse the heater in water.
- Periodically check the air inlets and outlets for dust accumulation and clean them gently with a soft brush or vacuum cleaner.
7.2 Storage
When not in use, store the heater in a cool, dry place, preferably in its original packaging, away from direct sunlight and moisture.
8. Troubleshooting
If you encounter issues with your heater, please refer to the following common troubleshooting steps:
- Heater does not turn on:
- Check if the power cord is securely plugged into a working electrical outlet.
- Ensure the power control knob is set to 'I' or 'II'.
- Verify that the household circuit breaker has not tripped.
- Check if the tip-over switch has been activated (ensure the heater is on a flat, stable surface).
- Allow the unit to cool down if the overheating protection system has been activated.
- Heater produces insufficient heat:
- Ensure the thermostat knob is set to a higher temperature than the current room temperature.
- Confirm the power control knob is set to 'II' (2000W) for maximum heat output.
- Check if the room size exceeds the recommended coverage area (15-20 m²).
- Unusual noises or smells:
- Turn off and unplug the heater immediately.
- Allow it to cool down and inspect for any visible damage or obstructions.
- If the issue persists, discontinue use and contact customer support.
9. User Tips
- Optimal Placement: For best results, place the heater in the center of the room or near the area you wish to heat most. Avoid placing it directly against walls or under windows where heat can escape easily.
- Energy Saving: Utilize the thermostat to maintain a comfortable temperature rather than running the heater continuously at maximum power. Lowering the thermostat by even a few degrees can significantly reduce energy consumption.
- Portability: Take advantage of the integrated swivel wheels to easily move the heater between different rooms as needed, providing targeted warmth where and when you need it.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided at the point of purchase or visit the official HOMCOM website. Keep your purchase receipt as proof of purchase for any warranty claims.