1. Product Overview
The Flipsky FT60BD is a high-performance Dual Electronic Speed Controller (ESC) designed for various DIY electric vehicles and robotics applications. It features a robust heatsink for efficient thermal management, supporting continuous currents up to 120A (dual) and peak currents up to 300A (dual). This ESC is compatible with 4S-12S LiPo batteries and offers extensive programmability through the Flipsky ESC Tool and compatible remote controllers.


2. Specifications
| Feature | Description |
|---|---|
| Firmware | V1.4 or above (update via Flipsky ESC Tool) |
| Voltage Range | 14V-60V (safe for 4S-12S LiPo) |
| Continuous Current | 60A (Single) / 120A (Dual) - dependent on mounting and ambient temperature |
| Peak Current | 150A (Single) / 300A (Dual) |
| Communication Ports | USB, CAN, UART, PPM, ADC |
| Input Signals Support | PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro), PAS |
| Startup Modes Support | IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 SPI) |
| BEC Output | 5V@1A |
| Speed Gear Levels | Low, Medium, High, Reverse |
| Accessory Support | Front Lights, Rear Brake Lights & Horn (12V 4A) |
| Programmability | Yes (via Flipsky ESC Tool and VX4 remote) |
| Regenerative Capacity | Yes |
| Smart Switch Function | Slide Poweron & Auto shutdown (customizable time) |
| Power Button | Self-resetting switch with green LED, 16mm diameter |
| Wire Size (Power/Motor) | 12AWG |
| ESC Dimensions | L85 * W70 * H25mm (including heatsink) |
Key Features:
- Equipped with CPU AT32F403ARCT7 (ARM Cortex-M4) for 240MHz clock speed and 45KHz max PWM switching frequency, enhancing motor RPM.
- Programmable via Flipsky ESC Tool for compatibility with various motor types, battery voltages, and control methods.
- Programmable via Flipsky remote controller VX4 (firmware VX4_V1.4.0 or above).
- Supports Motor FOC for low working noise and smooth starting.
- Provides real-time data and fault alerts.
- Adaptive variable PWM frequency control.
- Supports sensor mode (HALL) and sensorless modes (IPDS, HFPI).
- Supports control types: Current, Duty Cycle, Speed control, Position Control.
- Comprehensive protection functions: low/high voltage, over-current, abnormal temperature, MOSFET over-temperature/over-current, battery over-discharge, motor over-temperature.
- Integrated smart switch with slide power-on and adjustable automatic shutdown.
- Extra interfaces for front lights, brake lights, and horn fixtures (12V 4A).
- Supports multiple motor temperature sensors (NTC-10K-25, NTC-10K-100, PT1000, PTC-1K-100, KTY, etc.).

3. Setup and Installation
3.1 Wiring Diagram
Carefully follow the wiring diagram below for proper installation. Incorrect wiring can damage the ESC or connected components.

3.2 Connection Guide
- Battery Connection: Connect your 4S-12S LiPo battery to the main power input (red for positive, black for negative) using 12AWG wires. Ensure correct polarity.
- Motor Connections: Connect the phase wires (A, B, C for Master; A1, B1, C1 for Slave) from your brushless motors to the corresponding terminals on the ESC. Use 12AWG motor wires.
- Power Switch: Connect the self-resetting switch (16mm diameter, green LED) to the designated switch port. This enables the slide power-on and auto-shutdown features.
- Communication Ports:
- PPM: For standard remote control receivers.
- ADC: For analog input devices.
- UART: For serial communication, compatible with Flipsky remote VX4 and VX3Pro.
- CAN: For inter-ESC communication in multi-ESC setups or other CAN-enabled devices.
- USB: For connecting to a computer for configuration via Flipsky ESC Tool.
- HALL: For sensored motor operation.
- Accessory Connections (12V 4A): Dedicated ports are available for front lights, rear brake lights, and a horn. Ensure these accessories do not exceed the 12V 4A limit.
- Motor Temperature Sensors: Connect compatible motor temperature sensors (e.g., NTC-10K, PT1000) to the designated ports for enhanced motor protection.
4. Operation
4.1 Powering On/Off
- Slide Power-on: The ESC supports a slide power-on feature. Once configured, simply slide the device to power it on.
- Automatic Shutdown: The ESC will automatically shut down after a customizable period of inactivity. This time can be adjusted using the Flipsky ESC Tool.
- Manual Power Off: Press the connected self-resetting switch to manually power off the ESC.
4.2 Motor Control
- The ESC supports various control types including Current, Duty Cycle, Speed control, and Position Control. These can be configured via the Flipsky ESC Tool.
- Choose between sensorless (IPDS, HFPI) or sensored (HALL, Encoder) startup modes based on your motor and application requirements.
- Utilize the multiple speed gear levels (Low, Medium, High, Reverse) for precise control.
4.3 Programming and Configuration
- Connect the ESC to a computer via the USB port and use the Flipsky ESC Tool software for detailed configuration, motor detection, and firmware updates.
- If using a Flipsky VX4 remote, certain parameters can be programmed directly from the remote (ensure remote firmware is VX4_V1.4.0 or above).
5. Maintenance
- Regular Inspection: Periodically inspect all wiring connections for looseness or damage. Ensure the main power and motor wires (12AWG) are securely attached.
- Cleanliness: Keep the ESC free from dust, dirt, and moisture. Use a soft, dry brush or compressed air for cleaning. Avoid using liquids.
- Thermal Management: The heatsink is crucial for dissipating heat. Ensure it is not obstructed and has adequate airflow. The continuous current ratings are dependent on proper mounting and ambient temperature.
- Firmware Updates: Check the Flipsky website regularly for new firmware versions. Updating the firmware via the Flipsky ESC Tool can improve performance and add new features.
- Storage: When not in use for extended periods, store the ESC in a dry, cool environment.
6. Troubleshooting
6.1 Common Issues and Solutions
- No Power: Check battery connection, power switch functionality, and ensure the battery is charged.
- Motor Not Spinning/Irregular Operation: Verify motor phase wire connections. Perform motor detection using the Flipsky ESC Tool. Check sensor connections if using sensored mode.
- Overheating: Ensure adequate airflow around the heatsink. Reduce load or check for short circuits in motor windings. Monitor temperature via real-time data.
- Unexpected Shutdown: The ESC has built-in protection functions. Check for low/high voltage, over-current, and temperature abnormalities. Review fault alerts in the ESC Tool.
- Remote Control Issues: Ensure your remote (e.g., Flipsky VX4) is properly paired and its firmware is compatible (VX4_V1.4.0 or above for programming). Check PPM/UART connections.
6.2 Protection Functions
The FT60BD ESC is equipped with several protection mechanisms to prevent damage:
- Low and High Voltage Protection
- Over-Current Protection
- Temperature Abnormality Protection
- MOSFETs Over-Temperature and Over-Current Protection
- Battery Over-Discharge Protection
- Motor Over-Temperature Protection (requires connected temperature sensors)
If a protection is triggered, the ESC may reduce power or shut down. Consult the Flipsky ESC Tool for detailed fault logs.
7. User Tips
- Always perform a motor detection and calibration in the Flipsky ESC Tool after initial setup or changing motors to ensure optimal performance and safety.
- When mounting the ESC, consider its dimensions (L85 * W70 * H25mm) and ensure sufficient space for airflow around the heatsink.
- For DIY projects, double-check all connections before applying power to prevent accidental damage.
8. Warranty and Support
For warranty claims, technical support, or further assistance, please contact the seller or Flipsky customer service directly. Provide your purchase details and a clear description of the issue. Keep your proof of purchase for warranty validation.