DNVYUAX 29ED8NB900958

Contents

DNVYUAX USB Bone Conduction Headphones Magnetic Charger Instruction Manual

Model: 29ED8NB900958

Introduction

This manual provides instructions for the safe and efficient use of your DNVYUAX USB Bone Conduction Headphones Magnetic Charger. This charger is designed specifically for SHOKZ OpenSwim Pro S710 headphones, offering a convenient and reliable charging solution. Please read this manual thoroughly before use and retain it for future reference.

DNVYUAX USB Bone Conduction Headphones Magnetic Charger and Type C Adapter

Figure 1: Overview of the DNVYUAX Magnetic Charger and Type C Adapter options.

Setup

The DNVYUAX Magnetic Charger is designed for easy and hassle-free connection. Follow these steps to set up your charger:

  1. Identify Components: Your package includes either a USB charging cable or a Type C adapter.
  2. Connect to Power Source:
    • If using the USB Charging Cable: Insert the standard USB-A end into a compatible USB power adapter (e.g., wall charger, computer USB port, power bank). Ensure the power source provides 5V output.
    • If using the Type C Adapter: Insert the Type C end into a compatible Type C power adapter or port. Ensure the power source provides 5V output.
  3. Connect to Headphones: Align the magnetic probes interface of the charger with the charging port on your SHOKZ OpenSwim Pro S710 headphones. The magnetic connection will snap into place.
USB-A plug and magnetic charging connector

Figure 2: USB-A plug and magnetic charging connector of the cable.

Type C adapter with magnetic charging connector

Figure 3: Type C adapter with magnetic charging connector.

Operating Instructions

Once properly connected, your headphones will begin charging. The charger ensures quick and effective charging.

  1. Initiate Charging: After connecting both ends of the charger (power source and headphones), charging will automatically begin.
  2. Monitor Charging: Refer to your SHOKZ OpenSwim Pro S710 headphone's indicator lights or companion app (if available) to monitor the charging status.
  3. Completion: Disconnect the charger once your headphones are fully charged. Gently pull the magnetic connector away from the headphone's charging port.
Magnetic charging connection to bone conduction headphones

Figure 4: Magnetic connection to the SHOKZ OpenSwim Pro S710 headphones during charging.

Care and Maintenance

To ensure the longevity and optimal performance of your DNVYUAX Magnetic Charger, please follow these maintenance guidelines:

  • Keep Clean: Regularly wipe the magnetic contact points on both the charger and your headphones with a dry, soft cloth to prevent dust or debris buildup, which can interfere with charging.
  • Avoid Damage: Do not bend or twist the cable excessively. Avoid placing heavy objects on the cable or adapter.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Handle Gently: Always pull from the plug or adapter body, not the cable itself, when disconnecting from a power source or headphones.

Troubleshooting

If you encounter issues with your charger, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Headphones not chargingLoose connection, faulty power source, dirty contacts.
  • Ensure the magnetic connector is firmly attached to the headphones.
  • Verify the USB/Type C end is securely plugged into a working power source.
  • Try a different USB port or power adapter.
  • Clean the magnetic contact points on both the charger and headphones with a dry cloth.
Slow chargingLow power output from source, using a non-optimal power adapter.
  • Ensure your power adapter provides 5V and at least 1A output.
  • Avoid charging through unpowered USB hubs or older computer USB ports, which may provide lower current.
Magnetic connector does not attach properlyMisalignment, debris on contacts.
  • Ensure the connector is correctly oriented to match the headphone's charging port.
  • Check for any foreign objects or debris on the magnetic contacts and remove them carefully.

Specifications

FeatureDetail
Brand NameDNVYUAX
Model Number29ED8NB900958
CompatibilitySHOKZ OpenSwim Pro S710 Bone Conduction Headphones
Component MaterialABS
Color OptionsBlack (for cable and Type C adapter), Grey (for Type C adapter), Pink (for USB Cable variant)
Cable LengthApprox. 100cm (39.37 inches)
Input Voltage5V
Output Voltage5V
Output Current1000mA (1A)
InterfacesMagnetic probes interface (for headphones), Standard USB-A or Type C (for power source)
USB TypeStandard
UseSmart Devices
OriginMainland China
Product size diagram showing 100cm cable length

Figure 5: Product size diagram indicating a cable length of 100cm (39.37 inches).

User Tips

  • For optimal charging speed and safety, always use a certified USB power adapter that provides 5V and 1A output.
  • Ensure the magnetic charging contacts are always clean and dry to prevent corrosion and ensure a stable connection.
  • When traveling, consider carrying both the USB cable and a Type C adapter if you frequently use different power sources.

Warranty and Support

This product is designed for durability and reliable performance. For any questions, technical support, or warranty inquiries, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.