SODI Wireless Bluetooth Keyboard

Contents

SODI Wireless Bluetooth Keyboard for Mac

Instruction Manual

Introduction

Thank you for choosing the SODI Wireless Bluetooth Keyboard. This keyboard is designed to provide a smooth and precise typing experience for macOS and iOS devices, including MacBooks, iMacs, iPads, and iPhones. Featuring a full-plate aluminum body, backlit keys, a numeric keypad, and a slim profile, it is built for both aesthetics and productivity.

SODI Wireless Bluetooth Keyboard, full view
Figure 1: SODI Wireless Bluetooth Keyboard

Setup

1. Charging the Keyboard

Before initial use, ensure the keyboard is fully charged. The keyboard features a built-in 2000mAh rechargeable Lithium-ion battery.

  • Connect the included USB-C cable to the charging port on the keyboard and to a USB power source.
  • The charging indicator light will illuminate.
  • A full charge takes approximately 3.5 hours.
  • Once fully charged, the indicator light will change or turn off.
Keyboard connected via USB-C cable for charging
Figure 2: USB-C Rechargeable Port and Battery Life

2. Bluetooth Pairing Instructions

Follow these steps to pair your SODI Wireless Bluetooth Keyboard with your macOS or iOS device:

  1. Turn on the keyboard: Locate the power switch on the keyboard and slide it to the 'ON' position.
  2. Enter pairing mode: Press the 'FN' key and the 'C' key simultaneously. The blue Bluetooth indicator light will start blinking, indicating the keyboard is in pairing mode.
  3. Open Bluetooth settings on your device: On your Mac, iPad, or iPhone, go to System Settings (or Preferences) > Bluetooth.
  4. Search for the device: Your device will scan for available Bluetooth devices. Look for "SODI Wonder Keyboard" in the list.
  5. Connect: Click or tap on "SODI Wonder Keyboard" to initiate the connection. After successful pairing, the blue light on the keyboard will stop blinking and remain steadily on.
Step-by-step Bluetooth pairing instructions for the keyboard
Figure 3: Bluetooth Pairing Steps
Keyboard showing multi-device compatibility with MacBook, iPhone, and iPad
Figure 4: Multi-Device Bluetooth Keyboard Compatibility

Operating Instructions

1. Basic Typing

The keyboard features a standard 110-key layout with a numeric keypad, providing a familiar typing experience. Simply begin typing after successful pairing.

2. Optimized Multimedia Keys

The keyboard includes dedicated function keys (F1-F12) and special keys optimized for iOS/iPad OS, enhancing your workflow and productivity. These include:

  • F1: Decrease Brightness
  • F2: Increase Brightness
  • F3: Open Mission Control
  • F4: Open Launchpad
  • F5: Search
  • F6: Dictation
  • F7: Previous Track
  • F8: Play/Pause
  • F9: Next Track
  • F10: Mute
  • F11: Decrease Volume
  • F12: Increase Volume
  • Illuminated Key: For backlight control.
  • One-click Lock Key: To quickly lock your device.
  • One-click Screenshot Key: To capture screenshots instantly.
Detailed view of multimedia keys (F1-F12) and their functions
Figure 5: Optimized Multimedia Keys for iOS/iPad OS
Close-up of multimedia keys with icons for Illuminated Key, One-click lock, One-click screenshot
Figure 6: Special Function Keys

3. Backlight Control

The keyboard features a backlight with 3 adjustable brightness levels. Use the dedicated 'Illuminated Key' (often F1 or a specific backlight key) to cycle through brightness settings or turn the backlight on/off.

Keyboard with backlight on, in a desk setup
Figure 7: Backlit Wireless Keyboard

4. Power Saving Mode

To conserve battery life, the keyboard will automatically enter sleep mode after 15 minutes of inactivity. Press any key to wake it up.

Maintenance

1. Cleaning

  • Turn off the keyboard before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
  • Avoid using harsh chemicals, abrasives, or solvents that could damage the keyboard's surface or keys.
  • For cleaning between keys, use compressed air to remove dust and debris.

2. Battery Care

  • Recharge the keyboard when the battery is low to ensure optimal performance.
  • Avoid exposing the keyboard to extreme temperatures (hot or cold) as this can affect battery life.
  • If storing the keyboard for an extended period, charge it to about 50% before storage and recharge it periodically to prevent deep discharge.

Troubleshooting

1. Keyboard Not Connecting/Pairing

  • Ensure the keyboard is turned on and fully charged.
  • Make sure Bluetooth is enabled on your device.
  • Put the keyboard into pairing mode by pressing 'FN+C' until the blue light blinks.
  • Forget the device in your device's Bluetooth settings and try pairing again.
  • Restart both your device and the keyboard.
  • Ensure the keyboard is within the effective Bluetooth range (typically 10 meters).

2. Keys Not Responding

  • Check the battery level and recharge if necessary.
  • Ensure the keyboard is properly connected via Bluetooth.
  • Try restarting the keyboard and your device.
  • Clean any debris or dust from under the non-responsive keys.

3. Backlight Not Working

  • Press the 'Illuminated Key' to ensure the backlight is turned on and to cycle through brightness levels.
  • Check the battery level; low battery might disable the backlight to conserve power.

4. Keyboard Enters Sleep Mode Too Quickly

  • The keyboard is designed to enter sleep mode after 15 minutes of inactivity to save power. This is normal behavior. Press any key to wake it up.

Specifications

Feature Specification
Connectivity Bluetooth
Compatibility Mac OS, iPad OS, iOS (MacBook, Mac Mini, Mac Pro, iMac, iPad, iPhone)
Key Layout 110-key with Numeric Keypad
Key Type Scissor Switch
Backlight Yes, with 3 adjustable brightness levels
Battery Capacity 2000mAh Lithium-ion
Charging Time Approx. 3.5 hours
Standby Time Up to 100 days
Charging Port USB-C
Material Aluminum Faceplate
Dimensions (L x W x H) Approx. 17 x 4.8 x 0.47 inches (43.18 x 12.19 x 1.19 cm)
Weight 450g
Side and front view of the keyboard showing ultra-slim dimensions
Figure 8: Ultra Slim Size Dimensions
Diagram of a scissor switch key mechanism
Figure 9: Scissor Switch Keys Mechanism

User Tips

  • Optimize Battery Life: If you don't need the backlight, turn it off to extend the time between charges.
  • Quick Device Switching: While not explicitly stated as a feature, some Bluetooth keyboards allow quick switching between paired devices using specific key combinations (e.g., Fn + 1, 2, or 3). Check if your keyboard supports this for seamless transitions between your Mac, iPad, and iPhone.
  • Keep Bluetooth Clear: Avoid placing large metal objects or other strong wireless devices between your keyboard and your computer to maintain a stable Bluetooth connection.

Warranty and Support

For warranty information and technical support, please refer to the seller's policy or contact SODI customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.