Honda 37100-K59-M0

Contents

Digital Meter Speedometer and LED Digital Tachometer User Manual

Model: 37100-K59-M0

Compatible with: Honda Vario 125 LED, Vario 150, Vario 160, Click V2

1. Product Overview

This digital dashboard offers a stylish and functional update for your motorcycle, providing essential information during your rides. It integrates a speedometer, odometer, fuel gauge, and other critical rider functions. Designed with crisp lighting and clear visibility, this dashboard ensures all necessary information is readily available. It is a high-quality product intended to enhance both the functional performance and modern aesthetic of your motorcycle.

Front view of the standalone digital speedometer unit
Front view of the standalone digital speedometer unit, showcasing the full digital display.
Digital speedometer installed on a red Honda Vario motorcycle
Digital speedometer installed on a red Honda Vario motorcycle, showing the display in operation.

2. Safety Information

WARNING: Electrical Safety

Always disconnect the motorcycle battery (negative terminal) before performing any wiring work. Wiring must be carried out by a qualified person. Incorrect wiring can lead to short circuits, fire, or permanent damage to the meter or the motorcycle's electrical system.

WARNING: Riding Safety

NEVER operate the buttons or adjust settings while riding. Distraction during operation can lead to serious accidents.

Some countries/regions have specific laws and regulations regarding vehicle instrument modification and displayed units. Confirm local regulations before installation. This product is an aftermarket/universal accessory. If its installation affects safety-critical functions of the vehicle, consult a professional mechanic.

CAUTION

  • Do not immerse the meter in water or wash it with a high-pressure water jet. Ensure connectors are sealed and dry.
  • Avoid dropping the unit or subjecting it to strong impacts.
  • Clean the unit with a soft, dry cloth only.
  • Do not disassemble or modify the meter yourself, as this will void the warranty.

3. Setup and Installation

3.1 Pre-Installation Check

Before proceeding with installation, verify that the appearance of your new speedometer is consistent with your motorcycle's existing dashboard. If you are unsure about compatibility, please consult a professional or the seller to confirm suitability for your specific model (Honda Vario 125 LED, Vario 150, Vario 160, or Click V2).

3.2 Package Contents

The package typically includes:

  • 1 x Motorcycle Odometer (Digital Meter Speedometer and LED Digital Tachometer)

Note: Wiring harness may not be included. Please check product packaging or consult the seller if a wiring harness is required for your specific installation.

3.3 Installation Steps

  1. Disconnect Battery: As a critical safety measure, disconnect the negative terminal of your motorcycle's battery before beginning any electrical work.
  2. Remove Old Unit: Carefully remove the existing speedometer/dashboard unit from your motorcycle.
  3. Connect Wiring: Connect the new digital meter to your motorcycle's wiring harness. Ensure all connections are secure and correctly matched. If you are not experienced with motorcycle electrical systems, it is highly recommended to seek professional assistance to avoid damage.
  4. Mount Unit: Firmly mount the new digital meter and its bracket into the designated position on your motorcycle.
  5. Secure Cables: Ensure all cables are properly routed and fastened to prevent interference with vehicle control or damage from vibration.
  6. Reconnect Battery: Once installation is complete and all connections are verified, reconnect the motorcycle battery.
Rear view of the speedometer unit showing the main electrical connector
Rear view of the speedometer unit, highlighting the main electrical connector for installation.
Close-up of the rear connector and mounting points of the speedometer unit
Close-up of the rear connector and mounting points for secure installation.

4. Operating Instructions

4.1 Display Functions

The digital meter provides the following information:

  • Speed: Displays speed in both Kilometers per Hour (KMH) and Miles per Hour (MPH).
  • Mileage (Odometer): Records total distance traveled, up to 99,999 KM or Miles.
  • Trip Record: Records short-distance travel, up to 999.9 KM or Miles.
  • Clock: Displays time in a 24-hour format.
  • Fuel Level: Indicates the current fuel level.
  • Tachometer: Displays engine RPM (Revolutions Per Minute).
  • Other essential rider functions and indicators (e.g., turn signals, high beam, neutral gear).

4.2 Button Operation

Specific button functions (e.g., 'SELECT', 'SET') are typically used for switching display modes (e.g., ODO/TRIP), resetting trip meters, or adjusting the clock. Refer to the on-screen prompts or the detailed PDF manual for precise button operations.

4.3 Abnormal Readings

If you observe any abnormal readings or malfunctions, stop riding immediately and check the installation and connections before continuing. If the issue persists, consult a qualified mechanic.

5. Maintenance

  • Cleaning: Use only a soft, dry cloth to clean the display and housing. Avoid abrasive cleaners or solvents.
  • Water Exposure: Do not immerse the unit in water or expose it to high-pressure water jets. Ensure all connectors remain dry and sealed.
  • Physical Protection: Protect the unit from drops and strong impacts.
  • No Disassembly: Do not attempt to disassemble or modify the meter. Unauthorized modifications will void the product warranty.

6. Troubleshooting

Most issues can be resolved by checking the installation and connections. If the unit displays abnormal readings or fails to function:

  1. Stop the motorcycle in a safe location.
  2. Turn off the ignition.
  3. Inspect all electrical connections to the speedometer for looseness or corrosion.
  4. Verify that the unit is securely mounted and not vibrating excessively.
  5. If the problem persists, consult a professional motorcycle mechanic, especially if the issue might involve safety-critical vehicle functions.

7. Specifications

Feature Specification
Model Number 37100-K59-M0
Compatibility Honda Vario 125 LED, Vario 150, Vario 160, Click V2
Display Type Fully Digital LCD
Speed Units KMH & MPH
Mileage Units KM & Miles (up to 99,999)
Trip Record Units KM & Miles (up to 999.9)
Clock Format 24-hour
Material ABS
Color Black
Origin Mainland China
Package Dimensions (approx.) 22cm (L) x 18cm (W) x 15cm (H)
Package Weight (approx.) 0.5 kg

8. User Tips

  • Professional Installation Recommended: Given the electrical nature and safety implications, professional installation is highly recommended to ensure correct wiring and functionality.
  • Check Wiring Harness: Confirm if a wiring harness is included or needs to be purchased separately, as this unit is primarily the odometer itself.
  • Keep Manual: Retain this manual for future reference, especially if you need to troubleshoot or adjust settings. Pass it on if the motorcycle or product is resold.

9. Warranty and Support

This product is covered by a manufacturer's warranty. Please note that the warranty will be void if the meter is disassembled or modified by the user.

For detailed instructions and diagrams, you may refer to the official user manual PDF:

View User Manual (PDF)

For further assistance or technical support, please contact the seller or a certified service center.

© 2024. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.