ROMOSS PEA40PRO 65W

ROMOSS PEA40PRO 40000mAh 65W Fast Charge Power Bank User Manual

Model: PEA40PRO 65W | Brand: ROMOSS

1. Introduction

Thank you for choosing the ROMOSS PEA40PRO 40000mAh 65W Fast Charge Power Bank. This portable power bank is designed to provide high-speed charging for a wide range of devices, including laptops, smartphones, and tablets, with its impressive 65W output and large capacity. It features multiple input and output ports for versatile charging and is equipped with advanced safety features.

ROMOSS PEA40PRO 65W Power Bank with 40000mAh capacity, 65W Dual-Way Fast Charging, 65W Hyper Charge, 3 input ports, 3 output ports, and 916g weight.

Figure 1: ROMOSS PEA40PRO 65W Power Bank overview with key features.

Video 1: Demonstrates the power bank charging a laptop, tablet, and smartphone simultaneously, highlighting its 65W output and multiple ports.

2. Setup and Initial Activation

Before first use, please follow these steps to activate the power bank's battery:

  1. Upon receiving the power bank, fully recharge it to 100%.
  2. Completely discharge the power bank by using it until its power is fully consumed.
  3. Repeat steps 1 and 2 for 2 to 3 cycles. This process activates the power bank's battery for optimal performance.

Note: This activation step is crucial for all 40000mAh and 60000mAh capacity power banks.

Power bank being recharged, indicating 1.5 hours with a 65W adapter and 10.1 hours with an 18W adapter. Also shows approximate number of charges for various devices.

Figure 2: Recharging times and approximate number of charges for various devices.

3. Operating Instructions

3.1 Charging the Power Bank

The power bank supports three input interfaces for recharging:

  • Micro USB Input Port
  • Lightning Input Port
  • Type-C Input Port

For fastest recharging, use a 65W adapter with the Type-C input. A full recharge with a 65W adapter takes approximately 1.5 hours. Using an 18W adapter will take approximately 10.1 hours.

Note: The cable provided with the power bank does not support fast charging. To utilize fast charging capabilities, please use your own fast-charging compatible cable and adapter.

3.2 Charging External Devices

The power bank features three output ports to charge your devices:

  • Dual USB Output Ports
  • USB-C Output Port

All three output ports are fast charging compatible. You can charge up to three devices simultaneously.

Detailed view of the 3 input and 3 output ports with their specifications (Micro USB, Lightning, Type-C inputs; Dual USB, Type-C outputs).

Figure 3: Input and Output Port Configuration.

High-Power Output (65W)

The USB-C output port supports up to 65W Power Delivery (PD) for fast charging laptops such as MacBook Pro/Air Series and Mi NoteBook Pro Series. Ensure your charging cable and laptop also support 65W fast charging for optimal performance.

Power bank charging a laptop via PD 65W USB-C, indicating a full charge in 1.45 hours for a MacBook Pro.

Figure 4: PD65W USB-C output for laptop charging.

Tablet Fast Charging (30W)

The power bank supports 30W fast charging for tablets like iPad Air, iPad Pro, and iPad mini Series.

Image showing the power bank charging an iPad, highlighting 'Support 30W Fast Charge for Tablets'.

Figure 5: 30W fast charging for tablets.

Smartphone Fast Charging

The power bank is widely compatible with various fast charging protocols for smartphones, including:

  • PD 27W: iPhone 13 Pro Max
  • PD 18-20W: iPhone 8-13 Series
  • AFC 25W: Samsung Galaxy S22/Ultra, S21/S21+
  • SCP 22.5W: Huawei Mate 40 Pro, P40, P40 Pro, P40 Pro+
  • FCP 18W: Huawei P9 Plus, P9, Mate 8, Nova 8, Nova 7
  • QC 18W: Xiaomi 12, Xiaomi 11 Pro, Note 11SE, Note 11T
Diagram showing the power bank's fast charging compatibility with various devices.

Figure 6: Upgraded Fast Charge compatibility with various devices.

Low-Current Charging Mode

The power bank supports a low-current charging mode, which precisely identifies the current needed for smaller devices. This is ideal for charging accessories like smartwatches, fitness trackers, and Bluetooth headsets.

Power bank charging a smartwatch and Bluetooth earbuds, illustrating 'Support Low-current Charging Mode'.

Figure 7: Low-current charging for small devices.

3.3 Digital Display

The integrated digital display provides a clear view of the charging process, showing current, voltage, fast charging status, and the remaining battery level.

Digital display showing current, voltage, fast charge state, and battery level.

Figure 8: Smarter Digital Display showing charging information.

4. Maintenance

  • Keep the power bank away from extreme temperatures, direct sunlight, and moisture.
  • Avoid dropping or subjecting the power bank to strong impacts.
  • Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • If the power bank will not be used for an extended period, charge it to about 50-70% and store it in a cool, dry place. Recharge it every 3-6 months to maintain battery health.

5. Troubleshooting

  • Device not charging: Ensure the power bank is sufficiently charged. Check that the charging cable is securely connected to both the power bank and the device. Verify that the cable is not damaged.
  • Slow charging: Ensure you are using a fast-charging compatible cable and adapter for both recharging the power bank and charging your devices. Some devices or cables may not support the maximum 65W output.
  • Power bank not recharging: Check the charging cable and adapter. Ensure the power source is active. If the power bank has been completely depleted for a long time, it might take a few minutes for the charging indicator to appear.
  • Inaccurate battery display: The product data measured under non-laboratory conditions can be affected by environmental temperature, tester resistance, and voltage. If measured data does not match laboratory data, it is not considered a product issue.

6. Specifications

Package List / Specifications image with a table of product parameters for PEA40-282 (Model), Battery Type, Capacity, Rated Energy, Rated capacity, Input, Output, Total output, Size, Weight.

Figure 9: Detailed Product Parameters.

ROMOSS PEA40PRO 65W Power Bank Specifications
FeatureDetail
ModelPEA40-282 (PEA40PRO 65W)
Battery TypeLithium Polymer Battery / Lithium Ion Battery
Capacity40000mAh (148Wh)
Rated Capacity24000mAh (5V/3A)
Max Output65W
Input InterfaceMicro USB, LIGHTNING, USB-Type C
Output InterfaceMicro USB (Dual), USB-Type C
Input (Micro USB / Lightning)5V=2A or 9V=2A
Input (Type-C)5V=3A or 9V=3A or 12V=3A or 15V=3A or 20V=3.25A
Output (USB)4.5V=5A or 5V=4.5A or 9V=2A or 12V=1.5A
Output (Type-C)5V=3A or 9V=3A or 12V=3A or 15V=3A or 20V=3.25A
Total Output5V=3A
Shell MaterialPlastic
FeaturesDigital Display, Two-way Quick Charge
Dimensions (L x W x H)~L169.5 x W81.5 x H44mm
Weight~916g
CertificationsRoHS, CE, UL, FCC, EAC

7. User Tips

  • For optimal battery life and performance, always perform the initial activation steps (full charge, full discharge, repeat 2-3 times) when you first receive the power bank.
  • To achieve the advertised fast charging speeds (e.g., 65W for laptops), ensure that both your charging cable and the wall adapter are compatible with the required wattage and fast charging protocols. The included cable may not support fast charging.
  • When charging multiple devices simultaneously, the fast charging mode may not be active for all ports. For critical fast charging, charge one device at a time.
  • The digital display provides real-time information on current, voltage, and battery level, which can help you monitor the charging process effectively.

8. Warranty and Support

8.1 Warranty Information

ROMOSS provides 12-months free maintenance for this product. If any part requires replacement during this period, the buyer is responsible for the shipping costs for returning the product and the costs of the parts to be replaced.

8.2 Contact Support

For any questions, technical support, or warranty claims, please contact the seller or ROMOSS customer service through the platform where you purchased the product. Please provide your purchase details and a description of the issue for efficient assistance.