XinYi Sini Audio XY-ST21PRO

Contents

XY-ST21PRO Bluetooth Amplifier 2.1 Channel User Manual

Model: XY-ST21PRO | Brand: XinYi Sini Audio

1. Product Overview

The XY-ST21PRO is a high-power 2.1 channel Bluetooth digital audio amplifier designed for HiFi stereo applications. It features dual TPA3221 chips, delivering 100W per left/right channel and 200W for the subwoofer. The amplifier supports Bluetooth 5.2, AUX input, USB flash drive playback, and can function as a sound card. It also offers APP control for enhanced user experience.

XY-ST21PRO Bluetooth Amplifier overview with key features

Figure 1: XY-ST21PRO Bluetooth Amplifier overview with key features. This image highlights the XY-ST21PRO 2.1 BT digital power amplifier, featuring 100W*2+200W output, dual-core TPA3221, BT 5.2, AUX, USB flash drive, and sound card support. It emphasizes an added power switch for safety, lossless components for better sound quality, and separate bass and high tuning for convenience. Supports BT audio AAC SBC and USB audio WAV FLAC APE MP3.

Key Features:

  • High-Power Digital Amplification: Utilizes dedicated inductors for high current, low magnetic loss, low heat generation, and magnetic shielding against electromagnetic interference.
  • Dual TPA3221 Chips: Equipped with two TPA3221 chips for stable 2.1-channel amplification (100W+100W+200W).
  • Lossless Audio Components: Ensures better sound quality with independent high and low-frequency tuning.
  • Bluetooth 5.2 Support: Features a welded IPEX interface, allowing for connection to an external Bluetooth antenna for extended range.
  • Comprehensive Protection: Includes input undervoltage, input anti-reverse connection, overheating, overcurrent, and short circuit protection.

2. Package Contents

The product is available in different sets. Please verify your package contents against the list below:

  • Set 1: Amplifier board × 1
  • Set 2: ST21 amplifier board × 1, Shell kit × 1
  • Set Three: Amplifier board × 1, Lead wire × 5

Note: The shipment does not include power and audio cables. The product is not assembled for delivery, and parts may require self-assembly.

3. Setup Instructions

3.1 Power Supply Connection

Connect a DC12-30V/5A or above power supply to the 5.5-2.5mm DC seat or terminal block on the amplifier board.

3.2 Speaker and Audio Input Connections

Refer to the wiring diagram below for accurate connections of speakers and audio sources.

Detailed wiring and function guide for the XY-ST21PRO amplifier board

Figure 2: Detailed wiring and function guide for the XY-ST21PRO amplifier board. This diagram provides an accurate wiring and function guide. It shows connections for right and left speakers, U disk/sound card input, AUX import, and DC12-30V power supply. Key controls include the power switch, USB flash drive play indicator, AUX playback indicator, BT playback indicator, subwoofer volume, subwoofer frequency, left and right channel volume, treble adjustment, and bass adjustment. The power switch also functions for pause/play (click), next track (double click), one hit (three strikes), four hits for mode switch, and power on/off (press and hold).

  • Speaker Connection: Connect your right and left channel speakers to the designated terminals.
  • U Disk/Sound Card Input: Insert a USB flash drive for music playback or connect a device for sound card functionality.
  • AUX Import: Use the AUX input for connecting external audio devices via a 3.5mm audio cable.

3.3 Bluetooth Antenna (Optional)

The board comes with an onboard antenna, providing a normal Bluetooth distance of 10-15 meters. If the amplifier is installed in a metal casing (which may shield the signal) or if you require an increased Bluetooth distance (20-30 meters), an external 2.4G antenna can be connected to the welded IPEX interface.

Bluetooth antenna interface on the amplifier board

Figure 3: Bluetooth antenna interface on the amplifier board. This image shows the welded IPEX interface for the Bluetooth antenna. An external BT antenna can be connected here for improved range or when the amplifier is housed in a metal casing.

4. Operating Instructions

4.1 Power On/Off

Locate the power switch on the amplifier board. Press and hold the switch to turn the unit on or off.

4.2 Volume and Tone Adjustments

The amplifier features several knobs for precise audio control:

  • Subwoofer Volume: Adjusts the output level of the subwoofer.
  • Subwoofer Frequency: Controls the crossover frequency for the subwoofer.
  • Left & Right Channel Volume: Adjusts the overall volume for the main stereo channels.
  • Left & Right Channel Treble: Fine-tunes the high-frequency response of the main channels.
  • Left & Right Channel Bass: Fine-tunes the low-frequency response of the main channels.

4.3 Playback Control Buttons

The power switch also serves as a multi-function control button:

  • Click: Pause/Play audio.
  • Double Click: Skip to the next track.
  • Three Strikes: Perform a 'one hit' action (specific function may vary by mode).
  • Four Hits: Switch between different playback modes.

4.4 Bluetooth Connection

  1. Turn on the Bluetooth setting on your mobile phone or device.
  2. Search for available devices and select 'XinYi' to pair and play music.
  3. For APP control, search and pair 'XYV122UE'. Ensure that the APP location permission has been granted in your device's settings.
Bluetooth connection tips for mobile phone/APP

Figure 4: Bluetooth connection tips for mobile phone/APP. This image provides Bluetooth connection tips. To connect, turn on Bluetooth settings, search and pair 'XinYi'. To control the amplifier board via APP, search and pair 'XYV122UE'. A note advises confirming that APP location permission has been granted in settings.

4.5 USB Flash Drive Music and EQ Control (via APP)

USB flash drive music list and EQ user-defined settings via app

Figure 5: USB flash drive music list and EQ user-defined settings via app. This image demonstrates how to use the USB flash drive music list and user-defined EQ via a mobile app. Step 1: Click the button to open the USB flash drive music list and select music. Step 2: Click the button to open the equalizer and change the EQ settings.

  1. Access USB Music: In the control APP, click the designated button to open the USB flash drive music list and select your desired track.
  2. Adjust Equalizer: Click the equalizer button within the APP to open the equalizer interface and customize your audio settings.

5. Maintenance

To ensure the longevity and optimal performance of your XY-ST21PRO amplifier, follow these general maintenance guidelines:

  • Keep Dry: Avoid exposing the amplifier to moisture or liquids.
  • Clean Gently: Use a soft, dry cloth to clean the surface. Do not use harsh chemicals or abrasive materials.
  • Avoid Extreme Temperatures: Operate and store the amplifier in a moderate temperature environment.
  • Ventilation: Ensure adequate airflow around the unit, especially if it is enclosed in a case, to prevent overheating.

6. Troubleshooting

Common Issues and Solutions:

  • No Power:
    • Ensure the DC12-30V power supply is correctly connected and providing sufficient current (5A or above).
    • Check the power switch is in the 'ON' position.
  • No Sound Output:
    • Verify all speaker connections are secure and correctly wired (left/right channels).
    • Check the volume levels for both the main channels and the subwoofer.
    • Ensure the audio input source (BT, AUX, USB) is active and playing.
  • Bluetooth Connection Issues:
    • Make sure Bluetooth is enabled on your source device and the amplifier is in pairing mode.
    • Ensure your device is searching for 'XinYi' or 'XYV122UE' (for APP control).
    • Check if the amplifier is within the effective Bluetooth range (10-15 meters, or up to 20-30 meters with an external antenna).
    • If using the APP, confirm that location permissions are granted to the APP on your mobile device.
  • Distorted Sound:
    • Check the quality of your audio source.
    • Ensure speaker impedance matches the amplifier's capabilities.
    • Verify the power supply is stable and adequate.
    • Adjust bass and treble settings to avoid over-driving.
  • Unbalanced Sound (e.g., less sound in one channel):
    • Carefully inspect the speaker wiring for the affected channel to ensure it is secure and correct.
    • Check the balance settings on your audio source or within the amplifier's APP control, if available.
    • Try a different audio source or speakers to isolate the problem.
  • Protection Mechanism Triggered (Unit Shuts Off):
    • This indicates undervoltage, anti-reverse connection, overheating, overcurrent, or a short circuit.
    • Immediately disconnect power.
    • Check all wiring for short circuits or incorrect polarity.
    • Ensure the power supply meets the required voltage and current.
    • Allow the unit to cool down if overheating is suspected.

7. Specifications

Product features of the XY-ST21PRO amplifier

Figure 6: Product features of the XY-ST21PRO amplifier. This image lists product features: high-power digital amplifier special inductor for low magnetic loss and heat, dual TPA3221 for 2.1 channel 100W+100W+200W output, lossless components for sound quality, BT support with IPEX interface, and protection mechanisms (undervoltage, anti-reverse, overheating, overcurrent, short circuit).

NameBT Audio Power Amplifier Board
BrandXinYi Sini Audio
ModelXY-ST21PRO
Power SupplyDC12-30V/5A or above (DC seat: 5.5-2.5mm)
BT Version5.2
Audio InputBT+AUX+USB Flash Drive+Sound Card
BT Audio DecodingAAC SBC
USB AudioWAV FLAC APE MP3
Channels3 (2.1)
Maximum Power Per Channel131-200W
OriginMainland China
CertificationCE
Left and Right Channel Output Power
  • 10W+10W @ 8Ω/12VDC
  • 20W+20W @ 4Ω/12VDC
  • 35W+35W @ 8Ω/24VDC
  • 70W+70W @ 4Ω/24VDC
  • 60W+60W @ 8Ω/30VDC
  • 100W+100W @ 4Ω/30VDC
Subwoofer Output Power
  • 10W @ 8Ω/12VDC
  • 20W @ 4Ω/12VDC
  • 35W @ 8Ω/24VDC
  • 70W @ 4Ω/24VDC
  • 60W @ 8Ω/30VDC
  • 100W @ 4Ω/30VDC
  • 200W @ 2Ω/30VDC
Product Size (Without Casing)Approximately 111mm × 100mm × 23mm
Product Size (With Shell)Approximately 112mm × 102mm × 28mm
Potentiometer Connection Wire LengthApproximately 20cm
Dimensions of different versions of the XY-ST21PRO amplifier

Figure 7: Dimensions of different versions of the XY-ST21PRO amplifier. This image illustrates the dimensions for three versions: Integrated Potentiometer Version (111mm/4.37in x 100mm/3.94in x 23mm/0.91in), External Potentiometer Version (112mm/4.41in x 102mm/4.02in x 28mm/1.10in), and Integrated Panel Version (111mm/4.37in x 100mm/3.94in) with a potentiometer connection wire length of 20cm. Note that the product is not assembled for delivery, and parts need self-assembly.

8. User Tips

  • External Antenna for Metal Casings: If you plan to install the amplifier in a metal enclosure, it is highly recommended to use an external Bluetooth antenna to prevent signal shielding and maintain optimal wireless range.
  • Check Wiring for Sound Balance: If you experience unbalanced sound, such as one channel being quieter than the other, double-check all speaker connections and ensure they are correctly wired and secure. Also, review any balance settings in your audio source or the control APP.
  • Power Supply Quality: Using a stable and sufficiently powerful DC12-30V/5A (or higher current) power supply is crucial for achieving the advertised output power and preventing distortion or protection mechanism activation.

9. Warranty and Support

For detailed information regarding warranty, returns, or technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download:

User manual (PDF): View Item Guides & Documents


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.