SUGON T61

Contents

SUGON T61 400W Soldering Station User Manual

Model: T61

1. Safety Instructions

WARNING: When the power is on, the soldering iron tip temperature is between 100°C-450°C (212°F-842°F). Improper use can lead to burns or fire. Please strictly observe the following safety guidelines:

  • Do not touch the soldering iron tip or any metal parts near it.
  • Do not use the soldering iron near flammable materials.
  • Inform others in the workspace that the soldering iron tip is hot and can cause burns. Turn off the power when resting or after completing work.
  • When changing parts, turn off the machine and allow the tip to cool down.

To prevent damage to the soldering station and ensure a safe working environment, please observe the following:

  • This product operates at a rated voltage and frequency. Refer to the label on the back of the machine for specific details.
  • Do not use this product if it is damaged, especially if the power cable is compromised.
  • This product uses a three-wire grounded plug and must be inserted into a three-hole grounded socket. If an extension cord is needed, use a grounded three-wire power cord.
  • Do not use the soldering iron for any purpose other than welding.
  • Do not knock the soldering tip on the workbench to clean it, as this can severely damage the tips.
  • When replacing parts, use only original factory components.
  • Do not modify the soldering iron without proper safety precautions.
  • Do not wet the soldering iron, and do not operate it with wet hands.
  • Welding produces smoke; ensure adequate ventilation in the work area.
  • Do not use the machine in a way that could harm yourself or damage objects.
  • Children are unaware of the dangers of electrical products. Keep this station out of reach of children and ensure adult supervision if children are present.

2. Product Overview and Features

The SUGON T61 is a powerful 400W soldering station designed for precision welding and rework tasks. It features advanced functions for efficient and stable operation.

SUGON T61 Soldering Station with accessories

Figure 1: SUGON T61 Soldering Station with included accessories.

Key Features:

  • 400W Ultra-High Power: Provides powerful backup for the power supply, ensuring strong anti-interference, small anti-static leakage, good stability, and sufficient power.
  • Advanced Functions:
    • Large LED screen for clear display.
    • Rapid Heating: Heats up in 1 second, melts tin in 2 seconds.
    • Compatible with C210, C245, and C470 heating cores.
    • Automatic Hibernate function.
    • PID Temperature Control for precise temperature management.
  • Automatic Tip Recognition: Automatically identifies the heating core type and switches settings accordingly.
  • Touch-Sensitive Temperature Recovery: Ensures quick and stable temperature response.
  • No Hand Adjustment Required: Simply touch the soldering iron holder with the metal part of the handle, and the temperature will heat up immediately without manual adjustment.
Advanced functions of SUGON T61

Figure 2: Overview of advanced functions including power, screen, heating speed, compatibility, auto-hibernate, and PID control.

No hand adjustment required feature

Figure 3: Illustration of the 'No hand adjustment required' feature, showing the soldering iron in its holder.

3. Specifications

ParameterValue
Model NumberSUGON-T61
Max Power400W
Input VoltageAC100-240V
Frequency50-60Hz
Temperature Control Range100°C-450°C (212°F-842°F)
Compatible Heating CoresC210, C245, C470
Display2.8-inch LED
Dimensions (L x W x H)170mm x 160mm x 140mm (6.69in x 6.29in x 5.51in)
Package Weight1.9 kg
CertificationCE, FCC
Dimensions of SUGON T61 Soldering Station

Figure 4: Physical dimensions of the SUGON T61 Soldering Station.

Close-up of 2.8-inch LED display showing temperature

Figure 5: Close-up view of the 2.8-inch LED display showing temperature readings.

4. Setup and Installation

Follow these steps to set up your SUGON T61 Soldering Station:

  1. Handle Connection: Connect the handle device to the handle socket on the main unit. Ensure the power is off before connecting or disconnecting the handle to prevent damage to the control circuit board.
  2. Heating Core: Install the required heating core (C210, C245, or C470) into the handle.
  3. Station Placement: Place the soldering station on a stable, heat-resistant surface. Position the handle on its designated rack.
  4. Power Connection: Connect the power supply cable to the station and then to a grounded electrical outlet.
  5. Initial Power On: Turn on the power switch. The display window will show "---", indicating the soldering station is in standby mode.

5. Operating Instructions

5.1 Temperature Setting and Storage

  • Increasing Temperature: Press the "▲" button once to increase the set temperature by 1°C. The display will show the new set temperature. Press and hold "▲" for at least one second for rapid temperature increase; release when the desired temperature is reached.
  • Decreasing Temperature: Press the "▼" button once to decrease the set temperature by 1°C. The display will show the new set temperature. Press and hold "▼" for at least one second for rapid temperature decrease; release when the desired temperature is reached.
  • Storing Parameters: After setting the desired temperature, select one of the three channels (CH1, CH2, CH3). Press and hold the corresponding channel button (e.g., CH1) to save the current settings to that channel.
  • Recalling Stored Data: To recall memory data, simply press the desired channel button (e.g., CH1) for less than 1 second. The saved settings for that channel will be loaded.

5.2 Celsius and Fahrenheit Conversion

In the power-on state, press the "SET" button twice to switch between Celsius (°C) and Fahrenheit (°F) display units.

5.3 Key Lock Setting

When the unit is off, press and hold the "CH1" button, then turn on the power. This will enable or disable the key lock. The display will show "" for enabled and "X" for disabled.

5.4 Buzzer Setting

When the unit is off, press and hold the "CH2" button, then turn on the power. This will enable or disable the buzzer sound. When enabled, "" will be displayed and a prompt will sound. When disabled, "" will be displayed.

5.5 Standby Temperature Setting

When the unit is off, press and hold the "CH3" button, then turn on the power to enter the standby temperature setting interface. Available standby temperatures are: 0°C, 150°C, 180°C, and 200°C. Setting to 0°C will turn off the standby temperature function. After setting, short press CH3 to save and exit. (Note: This function is only available when using a C-245 heating element).

5.6 Temperature Calibration

Whenever the heating element is replaced, the temperature should be recalibrated. When the unit is off, press and hold the "SET" button to enter temperature calibration mode. Use the temperature adjustment buttons ("▲"/"▼") to calibrate the temperature, then press "SET" to save and exit calibration mode.

6. Maintenance

6.1 Soldering Iron Tip Maintenance

  • Tip Temperature: High temperatures can degrade tip function. Always choose the lowest possible temperature for effective soldering to protect temperature-sensitive components.
  • Regular Cleaning: Regularly clean the tip with a clean sponge. After welding, residual flux can cause oxidation and carbon buildup, leading to welding errors or reduced heat conduction.
  • Cleaning When Not in Use: Do not leave the iron at high temperatures for extended periods when not in use, as this can cause the solder on the tip to oxidize, significantly reducing its heat conduction capability.
  • After Use: After each use, clean the soldering iron tip and coat it with a new layer of tin to prevent oxidation.

6.2 Inspecting and Cleaning the Soldering Iron Tip

Note: Do not use a file to remove oxide from the soldering iron tip.

  1. Set the temperature to 250°C (482°F).
  2. Once the temperature stabilizes, clean the tip with a cleaning sponge and inspect its condition.
  3. If the tinned part of the tip has black oxide, apply a new tin layer, then wipe the tip with a clean sponge until the oxide is completely removed. Re-tin the tip with a fresh layer.
  4. If the soldering iron tip is deformed or heavily rusted, it must be replaced.

6.3 Heating Core Replacement

This soldering station uses a heating core integrated with the soldering head. After turning off the power and allowing it to cool, simply unplug the old one and plug in the new one.

C470-5D Soldering Iron Tip

Figure 6: C470-5D Soldering Iron Tip (Parameter Unit: MM, 12.5mm width).

C470-7.5K Soldering Iron Tip

Figure 7: C470-7.5K Soldering Iron Tip (Parameter Unit: MM, 18.5mm width).

C470-B Soldering Iron Tip

Figure 8: C470-B Soldering Iron Tip (Conical type).

7. Troubleshooting

This section provides guidance for common issues. For more complex problems, please contact customer support.

  • No Power: Ensure the power cord is securely connected to both the station and a functional power outlet. Check if the power switch is in the 'ON' position.
  • Temperature Not Reaching Set Point: Verify that the correct heating core is installed and properly seated. Ensure the temperature calibration is accurate (refer to Section 5.6). A heavily oxidized or damaged tip can also affect heat transfer; inspect and clean/replace if necessary (refer to Section 6.2).
  • Inconsistent Temperature: This could be due to a faulty heating core or an issue with the PID control. Ensure the tip is clean and properly tinned.
  • Error Display: If an error code appears on the LED display, refer to the full user manual for specific error code meanings.

8. User Tips

  • Optimal Voltage: Always ensure the soldering station is connected to the correct voltage (110V or 220V) as indicated on the unit and selected via the SKU. Using the wrong voltage can damage the device.
  • Leverage Auto-Adjustment: Make full use of the 'No hand adjustment required' feature by placing the iron in its holder when not actively soldering. This helps maintain tip temperature and prolong tip life.
  • Memory Channels: Utilize the CH1, CH2, and CH3 memory channels to quickly switch between frequently used temperature settings for different types of solder or components.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

An additional user manual in PDF format is available for download: SUGON T61 User Manual (PDF)

© 2024 SUGON. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.