1. Introduction
The JIKONG JK-B2A8S30P Smart Battery Management System (BMS) is designed for 4S to 8S battery configurations, supporting Li-Ion, LiFePO4, and LTO battery types. This advanced BMS features active balancing, high continuous current capabilities, and comprehensive protection functions to ensure the safety and longevity of your battery pack. It integrates intelligent monitoring and control via mobile app and PC software, offering a multi-interface display for real-time data.


2. Specifications
The JIKONG JK-B2A8S30P BMS offers robust performance and features. Below are the detailed specifications:

| Technical Index | Specification (JK-B2A8S30P) |
|---|---|
| Number of Battery Strings (Li-Ion) | 3S-8S |
| Number of Battery Strings (LiFePO4) | 4S-8S |
| Number of Battery Strings (LTO) | 6S-8S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 2A |
| Conductive Resistance in Main Circuit | 0.3mΩ |
| Continuous Discharge Current | 300A |
| Continuous Charge Current | 300A |
| Maximum Discharge Current (MAX 2min) | 400A |
| Over Charge Protection (ADJ) | 10-300A |
| Other Interfaces (Customized) | RS485, CANBUS HEAT |
| Size/mm | 189*94*24mm |
| Wiring Output | Common Port |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Current Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 1 Pcs |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS |

3. Setup and Installation
3.1 Packing List
Before installation, verify that all components are present:
- BMS x 1
- Sampling line x 1 (long 70cm)
- NTC (Temperature Sensor) x 1 (long 40cm)
- Switch x 1 (long 50cm)

3.2 Wiring Instructions
Follow these steps carefully for proper installation and wiring:
- Connect all balance cables to the battery cells.
- Insert the balance cable into the BMS.
- Connect the B- line to the battery's total negative terminal.
- Connect the P- line to the load/inverter/charger negative terminal.
- Connect the P+ line to the battery's total positive terminal.
Ensure all connections are secure and correctly polarized to prevent damage to the BMS or battery pack.
3.2.1 Wiring for 8-String Cells

3.2.2 Wiring for 4-String Cells

4. Operating Instructions
4.1 Active Balancing Function
The JIKONG BMS features intelligent active balancing technology. Active balancing transfers energy from cells with higher voltage to those with lower voltage, achieving voltage balance with minimal energy loss. This process operates continuously during charging, discharging, or idle states until the voltage difference between cells is within a set range. This lossless balancing mechanism helps extend battery lifespan and ensures more stable performance.


4.2 Monitoring and Control (App/PC Software)
The JIKONG BMS supports intelligent interaction and easy operation through a dedicated mobile application ("JIKONG SMART BMS") for iOS/Android/HarmonyOS and PC software. These interfaces allow you to:
- View real-time battery information: voltage, current, temperature, and number of strings.
- Adjust multiple protection values: overcharge, overdischarge, overcurrent, temperature, and balance parameters.
- Monitor battery health and cycle count.
Download the official app from the provided QR code on the BMS unit or visit the official website (www.jk-bms.com) for software downloads.


4.3 Interfaces and Communication
The BMS offers rich interfaces to meet various daily needs and communication modes:
- CAN: Controller Area Network for robust communication.
- RS485: Serial communication interface.
- BT (Bluetooth): Wireless connectivity for mobile app.
- NTC: Temperature sensor input.
- Soft Switch: For power control.
- SOC Indicator: State of Charge display.
- Key Switch: For system activation.
- Active Equalizer: Integrated balancing function.

5. Maintenance
To ensure optimal performance and longevity of your JIKONG BMS, follow these maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion. Ensure the BMS is securely mounted.
- Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, or moisture.
- Cleaning: Keep the BMS free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- Firmware Updates: Check the official JIKONG website (www.jk-bms.com) for any available firmware updates for your BMS model. Follow the provided instructions carefully for any update procedures.
- Physical Protection: The BMS features a fully aluminum alloy shell designed to reduce damage from the external environment and aid in heat dissipation. Avoid physical impact or excessive pressure on the unit.


6. Troubleshooting
This section provides guidance on common issues you might encounter with your JIKONG BMS.
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not powering on/no output | Incorrect wiring, loose connections, battery voltage too low, BMS in protection mode. | Check all wiring against the diagrams. Ensure battery voltage is within operating range. Verify balance cable connections. If in protection mode, identify and resolve the trigger (e.g., over-discharge, short circuit). |
| Battery cells unbalanced | Initial cell voltage differences, prolonged disuse, faulty balance leads. | Allow the active balancing function to operate. Monitor cell voltages via the app. Ensure balance leads are correctly connected and not damaged. |
| Overcharge/Over-discharge protection triggered | Charging/discharging beyond set voltage limits, faulty charger/load. | Check charger/load settings. Verify BMS protection parameters in the app. Ensure battery cells are healthy. |
| Overcurrent/Short circuit protection triggered | Excessive load, short circuit in wiring or load. | Reduce load. Inspect wiring and connected devices for short circuits. The BMS has a short circuit protection response of 10-500µs. |
| Bluetooth connectivity issues | BMS not powered, Bluetooth disabled on device, app issues, interference. | Ensure BMS is powered. Enable Bluetooth on your mobile device. Restart the app and your device. Move closer to the BMS to reduce interference. |
| Inaccurate readings (voltage, current, temp) | Faulty sensors, loose connections, calibration issues. | Check NTC sensor connection. Verify balance lead connections. If issues persist, contact support. Voltage detection accuracy is ±5mV. |
7. User Tips
- Initial Balance: For new battery packs, allow the BMS to perform initial balancing for several charge/discharge cycles to optimize cell voltage consistency.
- App Monitoring: Regularly use the mobile app or PC software to monitor your battery's health. Pay attention to cell voltage differences, temperature, and overall State of Charge (SOC).
- Parameter Adjustment: If you need to adjust protection parameters (e.g., overcharge/discharge voltage), do so cautiously and understand the implications for your specific battery chemistry. Refer to the internal parameters of the protection board first.
- Proper Sizing: Ensure the BMS's continuous charge/discharge current rating (300A for this model) matches or exceeds the requirements of your application to avoid triggering overcurrent protection prematurely.
- Application Versatility: This BMS is suitable for a wide range of applications including E-bikes, electric tricycles, forklifts, industrial drones, scooters, RV energy storage, and general lithium battery packs.

8. Warranty and Support
For technical support, warranty information, or inquiries regarding personalized customization services (structure, hardware, software), please contact JIKONG Official Store directly. JIKONG Technology Co., Ltd. offers rapid technical support and strong manufacturing capabilities to meet various customization needs.
Refer to the official JIKONG website (www.jk-bms.com) for the most up-to-date support information and resources.