JIKONG JK-B1A8S20P

Contents

JIKONG JK-B1A8S20P Smart Active Balance BMS User Manual

Model: JK-B1A8S20P / JK-B1A8S20PHC | Brand: JIKONG

1. Introduction

The JIKONG Smart Active Balance Battery Management System (BMS) is designed to provide comprehensive protection and intelligent management for various battery types, including LiFePO4, Li-Ion, and LTO. This BMS supports battery configurations from 4S to 8S (12V to 24V) and features an active balancing current of 1A or 2A, along with continuous charge/discharge currents up to 200A, depending on the model variant. It ensures optimal battery performance, extended lifespan, and enhanced safety through advanced protection functions and real-time monitoring capabilities via mobile app or PC software.

JIKONG BMS with scooter and highlighted features
Figure 1: JIKONG BMS overview, highlighting six major interfaces (GPS/RS485/CAN/Display/Heat/NTC), multi-interface display, high-performance MCU, continuous current, instantaneous current, and active balancing current.

2. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

  • BMS Unit x 1
  • Sampling Line x 1 (length 70cm)
  • NTC (Temperature Sensor) x 1 (length 40cm)
  • Switch Key x 1 (length 50cm)
JIKONG BMS Packing List
Figure 2: Contents of the JIKONG BMS package, including the BMS unit, sampling line, NTC temperature sensor, and switch key.

3. Specifications

The JIKONG BMS offers robust performance and protection features. Below are the detailed specifications for various models, with a focus on the JK-B1A8S20P.

JIKONG Product Specifications
Technical IndexJK-B1A8S10PJK-B1A8S20PJK-B2A8S20PJK-B2A8S30P
Number of Battery Strings (Li-Ion)3S-8S3S-8S3S-8S3S-8S
Number of Battery Strings (LiFePO4)4S-8S4S-8S4S-8S4S-8S
Number of Battery Strings (LTO)6S-8S6S-8S6S-8S6S-8S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.3mΩ
Continuous Discharge Current100A200A200A300A
Continuous Charge Current100A200A200A300A
Maximum Discharge Current (MAX 2min)200A300A300A400A
Over Charge Protection (ADJ)10-100A10-200A10-200A10-300A
Other Interfaces (Customized)RS485
Other Interfaces (Customized)CANBUS HEAT
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection1Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android IOS
JIKONG Product Specifications Table
Figure 3: Detailed product specifications for JIKONG BMS models.

Dimensions (Approximate)

  • JK-B1A8S10P / JK-B1A8S20P: 153mm (Length) x 126mm (Width) x 18mm (Height)
  • JK-B2A8S20P / JK-B2A8S30P: 189mm (Length) x 94mm (Width) x 24mm (Height)

Note: Data tolerance range is ±2mm.

Dimensions of JK-B1A8S10P BMS
Figure 4: Dimensions for JK-B1A8S10P model (153.9mm x 105mm x 17.6mm).
Dimensions of JK-B2A8S20P BMS
Figure 5: Dimensions for JK-B2A8S20P model (153mm x 126mm x 17.6mm).
Dimensions of JK-B2A8S30P BMS
Figure 6: Dimensions for JK-B2A8S30P model (174.77mm x 127.26mm x 17.6mm).

4. Key Features

4.1. Active Balancing (Lossless Balancing)

The JIKONG BMS utilizes intelligent active balancing technology. Active balancing is achieved through energy transfer, moving energy from cells with higher energy to cells with lower energy, thereby achieving voltage balance with minimal energy loss. This process operates continuously, regardless of whether the battery is charging, discharging, or idle, until the voltage difference is within the set range. This method does not generate significant heat, allowing for larger balancing currents (typically 1A-2A) and is highly effective for larger capacity battery packs.

Active Balancing (Lossless Balancing) diagram
Figure 7: Diagram illustrating the active balancing process, where energy is transferred between cells to equalize voltage.

4.2. Comprehensive Protection Functions

The BMS provides essential protection for your battery pack:

  • Overcharge Protection: Prevents cells from being charged beyond their safe voltage limit.
  • Over Discharge Protection: Protects cells from being discharged below their safe voltage limit.
  • Overcurrent Protection: Safeguards against excessive current during charge and discharge.
  • Short Circuit Protection: Instantly cuts off current in case of a short circuit.
  • Temperature Protection: Monitors battery temperature to prevent overheating or freezing.

4.3. Smart Monitoring and Interaction

The JIKONG BMS supports intelligent interaction and easy operation. You can freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings. Real-time data monitoring is available through a mobile phone Bluetooth APP ("JIKONG SMART BMS") for iOS, Android, and HarmonyOS, or via PC software. This allows you to view voltage, current, temperature, and number of strings at a glance.

Multi-screen display and data connection for JIKONG BMS
Figure 8: Examples of multi-screen display options, including mobile app, PC software, and dedicated JIKONG home storage display, showing real-time battery data.

4.4. Robust Construction and Core Components

The BMS features a high-quality aluminum alloy shell, which significantly reduces damage from the external environment on the electronic components. This one-piece molding technology with superior heat dissipation properties ensures durability and reliable performance. Inside, selected core components, including a featured MCU, MOS, and NTC, ensure efficient operation and accurate voltage detection (±0.015V) and rapid short circuit protection (10-500µs response time).

Exploded view of JIKONG BMS components
Figure 9: Exploded view of the JIKONG BMS, showing cooling aluminum alloy plates, MOS transistors, JIKONG MCU, NTC temperature sensor, and sampling lines.
Aluminum alloy shell of JIKONG BMS
Figure 10: The durable aluminum alloy shell of the JIKONG BMS, designed for protection and heat dissipation.

4.5. Rich Interface Options

The BMS offers multiple communication and control interfaces to meet diverse application needs:

  • CAN Bus
  • RS485
  • Bluetooth (BT)
  • NTC (Temperature Sensor)
  • Soft Switch
  • SOC Indicator
  • Key Switch
  • Active Equalizer
JIKONG BMS interfaces
Figure 11: Diagram showing the rich interface options available on the JIKONG BMS, including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer.

5. Installation and Wiring

Proper installation and wiring are crucial for the safe and effective operation of your JIKONG BMS. Please follow these steps carefully:

  1. Connect all cables: Ensure all individual cell voltage sampling lines are connected correctly to their respective battery cells.
  2. Insert the cable into the BMS: Carefully plug the sampling cable connector into the designated port on the BMS.
  3. Connect the B-line and P-line to the battery: Connect the main negative terminal (B-) of the battery pack to the B- terminal on the BMS. Connect the main positive terminal (P+) of the battery pack to the P+ terminal of your load/charger, and the P- terminal of the BMS to the negative terminal of your load/charger.

5.1. Wiring Method for 4-String Cells

Wiring diagram for 4-string cells with JIKONG BMS
Figure 12: Detailed wiring diagram for a 4-string battery configuration. Connect individual cell balance wires (1S, 2S, 3S, 4S) to the BMS. Connect the main battery negative (B-) to the BMS B- terminal. Connect the main battery positive (P+) to the load/charger positive. Connect the BMS P- terminal to the load/charger negative. Ensure NTC and switch are connected.

5.2. Wiring Method for 8-String Cells

Wiring diagram for 8-string cells with JIKONG BMS
Figure 13: Detailed wiring diagram for an 8-string battery configuration. Connect individual cell balance wires (1S through 8S) to the BMS. Connect the main battery negative (B-) to the BMS B- terminal. Connect the main battery positive (P+) to the load/charger positive. Connect the BMS P- terminal to the load/charger negative. Ensure NTC and switch are connected.

Important Safety Note: Always connect the balance wires before connecting the main power wires (B- and P-). Disconnect in reverse order (P-, then B-, then balance wires).

6. Operation

Once the BMS is correctly installed and wired, you can begin operating and monitoring your battery system.

6.1. Powering On/Off

Use the provided switch key to power on or off the BMS. Refer to the wiring diagrams for the switch connection point.

6.2. Monitoring via Mobile App (JIKONG SMART BMS)

Download the "JIKONG SMART BMS" app from your device's app store (available for iOS, Android, and HarmonyOS). Connect to the BMS via Bluetooth. The app provides real-time data on:

  • Overall battery voltage
  • Individual cell voltages
  • Charge/discharge current
  • Battery temperature (from NTC sensor)
  • State of Charge (SOC)
  • Cycle count
  • Alarm status for protection events

The app also allows you to adjust various protection parameters and balancing settings. Always understand the implications of parameter changes before applying them.

6.3. Monitoring via PC Software

For more detailed analysis and configuration, JIKONG provides PC software. This software offers a comprehensive interface for monitoring all battery parameters and adjusting advanced settings. Refer to the JIKONG website (www.jk-bms.com) for software download and detailed instructions.

JIKONG BMS intelligent interaction and display options
Figure 14: Examples of intelligent interaction and display options, including the PC software interface and a dedicated display unit, showing various battery parameters.

7. Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS, follow these general maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, moisture, or direct sunlight.
  • Firmware Updates: Check the official JIKONG website (www.jk-bms.com) for any available firmware updates. Keeping your BMS firmware up-to-date can improve performance and add new features.

8. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following common troubleshooting steps:

  • BMS Not Powering On:
    • Check all main power connections (B- and P-).
    • Ensure the switch key is correctly connected and activated.
    • Verify the battery pack voltage is within the operational range.
  • No Bluetooth Connection:
    • Ensure the BMS is powered on.
    • Check if Bluetooth is enabled on your mobile device.
    • Try restarting the app and the BMS.
    • Ensure your device is within Bluetooth range.
  • Cell Voltage Imbalance:
    • Verify all sampling lines are correctly and securely connected to each cell.
    • Check the active balancing settings in the app/PC software.
    • Allow sufficient time for the active balancing to work, especially with large capacity packs.
  • Protection Triggered (Overcharge, Overdischarge, Overcurrent, etc.):
    • Identify the specific protection that was triggered via the app/PC software.
    • Address the root cause (e.g., reduce charge/discharge current, check charger voltage, inspect load).
    • The BMS will typically reset automatically once the condition is resolved, or after a brief delay.
  • Incorrect Readings:
    • Double-check all wiring, especially the sampling lines, for correct polarity and secure connections.
    • Ensure the NTC sensor is properly placed for accurate temperature readings.

For persistent issues, consult the detailed documentation on the JIKONG website (www.jk-bms.com) or contact JIKONG technical support.

9. User Tips

  • Initial Setup: Before connecting the BMS to your battery pack, ensure all individual cells are balanced to a similar voltage. This will allow the active balancing feature to work more efficiently from the start.
  • Parameter Adjustment: When adjusting protection parameters via the app or PC software, make small, incremental changes and observe the system's behavior. Incorrect settings can lead to battery damage or system shutdown.
  • Cable Management: Keep all wiring neat and secure to prevent accidental disconnections or short circuits. Use cable ties and protective sleeving where appropriate.
  • Temperature Monitoring: Pay attention to the battery and BMS temperatures, especially during high charge/discharge cycles. Ensure adequate ventilation around the battery pack and BMS.
  • App Updates: Regularly check for updates to the JIKONG SMART BMS app to benefit from new features, bug fixes, and improved compatibility.

10. Warranty and Support

JIKONG products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official JIKONG website (www.jk-bms.com) or contact your authorized dealer. Please have your product model and purchase details ready when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.