MatSee Plus PJ-1103N

Contents

Tuya Smart WiFi Digital Energy Monitor 80A with CT Sensor

Model: PJ-1103N | Brand: MatSee Plus

1. Introduction

The MatSee Plus PJ-1103N is a smart WiFi digital energy monitor designed to measure and track electricity consumption in real-time. It utilizes a current transformer (CT) sensor for non-invasive current measurement and connects to the Tuya Smart or Smart Life mobile application via 2.4GHz WiFi. This device allows users to monitor voltage, current, power, and total energy (KWh) consumed, as well as set up automation rules based on energy parameters.

Tuya Smart WiFi Digital Energy Monitor with CT Sensor and app interface

Overview of the energy monitor unit, current transformer (CT) sensor, and the accompanying mobile application interface.

2. Safety Information

  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
  • The device requires a neutral wire for proper voltage, current, and power measurement.
  • When using the current transformer (CT) clamp, ensure that only one wire (either live or neutral, but not both) passes through the clamp at a time. Passing both wires will result in inaccurate readings.
  • This device is designed for indoor use only.
  • Do not expose the device to moisture or extreme temperatures.

3. Package Contents

Please check the package for the following items:

  • 1 x Tuya Smart WiFi Digital Energy Monitor (Model: PJ-1103N)
  • 1 x Current Transformer (CT) Sensor (80A)
  • 1 x User Manual (this document)

4. Specifications

Feature Specification
Model Number PJ-1103N
Brand Name MatSee Plus
Meter Type Current Sensor Clamp Meter
Input Voltage AC 100-240V 50/60Hz
Measurable Current Range 0.2A - 80A
WiFi Type 2.4GHz (does not support 5GHz)
Ambient Temperature Range -10°C ~ 55°C
App Name Tuya Smart, Smart Life
Certification CE
DIY Supplies Electrical
Dimensions of the energy monitor unit and current transformer (CT) sensor

Dimensions of the energy monitor unit and current transformer (CT) sensor.

5. Setup and Installation

5.1 Wiring Diagram

Follow the diagram below for correct wiring. Ensure the power is OFF before connecting any wires.

Wiring diagram for the Tuya Smart WiFi Digital Energy Monitor

Detailed wiring diagram showing connections for the energy monitor unit, CT sensor, and load, indicating live (L) and neutral (N) wires.

  • Connect the Live (L) and Neutral (N) wires of your power supply to the corresponding terminals on the energy monitor.
  • Connect the load's Live (L) and Neutral (N) wires to the output terminals of the energy monitor.
  • Attach the CT sensor to the S1 and S2 terminals.
  • Clamp the CT sensor around the live wire only of the circuit you wish to monitor. Do not clamp both live and neutral wires together.
Installation example of the energy monitor and CT sensor in a circuit breaker panel

An illustrative image showing the energy monitor and CT sensor integrated into a typical electrical panel setup.

Current transformer (CT) sensor clamped around a live wire for non-invasive measurement

A close-up view of the CT sensor, highlighting its non-invasive installation method by clamping around a single wire.

5.2 App Pairing

  1. Download the 'Tuya Smart' or 'Smart Life' app from your mobile app store.
  2. Register or log in to your account.
  3. Power on the energy monitor. The indicator light should start blinking, indicating pairing mode. If not, press and hold the pairing button on the device until it blinks rapidly.
  4. In the app, tap '+' to add a new device.
  5. Select 'Electrical' > 'Smart Energy Meter' or allow the app to auto-discover the device.
  6. Enter your 2.4GHz WiFi network credentials (5GHz networks are not supported).
  7. Follow the on-screen instructions to complete the pairing process.

Video demonstrating the pairing process of the energy monitor with the app and real-time data display.

6. Operating Instructions

6.1 Real-time Monitoring

Once paired, open the app to view real-time data:

  • Voltage (V): Displays the current voltage of the circuit.
  • Current (A): Shows the real-time current flowing through the monitored wire.
  • Power (W): Indicates the instantaneous power consumption.
  • Load Percentage: A visual representation of the current load relative to the maximum capacity.
App interface displaying device working status, voltage, current, and power readings

Mobile application views indicating whether the device is active or shut down, along with real-time voltage, current, and power measurements.

6.2 Electricity Statistics

The app provides detailed historical electricity consumption data:

  • Hourly Electricity (KWh)
  • Daily Electricity (KWh)
  • Monthly Electricity (KWh)
  • Yearly Electricity (KWh)
  • Total Electricity (KWh)
App interface showing hourly, daily, monthly, and yearly electricity consumption statistics

Screenshots of the mobile application demonstrating electricity usage statistics over various time periods.

6.3 Power Setting and Automation

You can set a maximum power threshold and create automation rules:

  • Maximum Power Setting: Access 'Power setting' in the app to define a maximum power (W) limit for the monitored circuit.
  • Automation Scenes: Create custom scenes where if the measured power or current exceeds a set value, other Tuya-compatible smart devices can be triggered to perform actions (e.g., turn off a device).
  • Notifications: Set up notifications to receive alerts when the device's working status changes, such as when it turns off.
App interface for setting maximum power threshold

Screenshot of the mobile application's power setting interface, allowing users to define a maximum power limit.

App interface for creating automation rules based on power or current values

Screenshots illustrating the process of setting up automation scenes within the app, triggered by specific power or current conditions.

App interface for setting up notifications when the device turns off

Mobile application screens demonstrating how to configure notifications for device status changes, such as when it powers off.

7. Maintenance

  • Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
  • Do not use harsh chemicals or abrasive cleaners.
  • Regularly check wiring connections to ensure they are secure.
  • Ensure the device is installed in a well-ventilated area to prevent overheating.

8. Troubleshooting

Device not connecting to WiFi:
Ensure your WiFi network is 2.4GHz. The device does not support 5GHz WiFi. Check your WiFi password and signal strength.
Inaccurate readings or no data:
Verify that the CT sensor is clamped around only one wire (live or neutral). If both are clamped, readings will be incorrect. Ensure the measured device has a neutral wire connected to the energy monitor. The minimum current displayed by the app is 0.1A; devices with very low power consumption may not register.
Device not compatible with Home Assistant:
This device is designed to work with the Tuya Smart and Smart Life applications and is not directly compatible with Home Assistant.
Cannot measure power in both directions (bidirectional):
This meter is not bidirectional. It can only measure consumed power and will only display positive data on the app.

9. User Tips

  • For optimal performance and accurate readings, ensure the CT sensor is correctly installed around a single live wire.
  • Utilize the automation features within the Tuya Smart/Smart Life app to create energy-saving routines or receive alerts for unusual power consumption patterns.
  • Regularly review your hourly, daily, and monthly electricity statistics to identify energy-hungry appliances and optimize usage.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information or technical support, please refer to the seller's policy or contact their customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 MatSee Plus. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.