Phomemo M110

Contents

Phomemo M110 Label Printer User Manual

Model: M110

1. Product Introduction

1.1 Packing List

The Phomemo M110 Label Printer package typically includes the following items:

  • Printer (x1)
  • Quick Start Guide (x1)
  • Type-C Cable (x1)
  • Paper Roll Spindle (x1)
  • 100-Pc 40*30mm Paper Roll (x1)

Note: The Paper Roll and Paper Roll Spindle are usually pre-installed in the printer. If you purchased a bundled printer package, it might not include an additional 40*30mm-100pc Paper Roll.

Phomemo M110 Label Printer with white label and shell bag

Image: Phomemo M110 Label Printer with white label and shell bag, illustrating the main product and accessories.

1.2 Printer Parts Instruction

Familiarize yourself with the different parts of your Phomemo M110 Label Printer:

PartDescription
Decorative PanelTop aesthetic cover.
Top CoverOpens to access the paper compartment.
DisplayShows printer status and menu options.
Paper ExitWhere printed labels emerge.
Feed/Select ButtonFeeds paper or selects menu options.
Power/Menu ButtonTurns the printer on/off and accesses the menu.
Paper Roll SpindleHolds the label paper roll.
Paper CompartmentArea where the label roll is placed.
Manual CutterUsed to manually cut labels.
Type-C Charger PortFor charging the printer.
Reset HoleUsed to reset the device.
Lanyard HoleFor attaching a lanyard.
Diagram of Phomemo M110 printer parts

Image: Detailed diagram illustrating the various parts of the Phomemo M110 Label Printer.

2. Setup and First Use

2.1 Downloading the App

The Phomemo M110 Label Printer operates via the "Print Master" app. You can download it using one of the following methods:

  1. Method 1: Search in App Stores
    Search for "Print Master" on the App Store (for iOS devices) or Google Play Store (for Android devices) and install the app.
  2. Method 2: Scan QR Code
    Scan the QR code provided below using your cell phone's camera, the built-in QR code scanning feature of your browser, or a dedicated QR code scanning app.
Print Master App features and download options

Image: Print Master APP features, including download options for iOS and Android, and a QR code for easy access.

Note: Safari browser on Apple devices may not support direct QR code scanning. Use your device's built-in QR code scanner instead.

2.2 User Guide (First Print)

Follow these steps for your first print:

  1. Remove Protective Film: Peel off any protective film from the printer. This step is required for first use.
  2. Power On: Long press the Power Button for 3 seconds until the Display lights up.
  3. Open App: Open the "Print Master" app on your smartphone.
  4. Grant Permissions: Grant necessary permissions (e.g., Bluetooth access) to the app when prompted.
  5. Connect: Tap [Auto Connect] in the app. The app will search for and connect to your printer.
  6. Edit Label: Edit your first label within the app.
  7. Print: Tap [Print] after you finish editing.
  8. Tear Off: Once printing is completed, tear off the label along the Paper Exit.
  9. Remove Liner: Remove the backing liner from the label.
  10. Attach Label: Attach the label to a dry, flat surface.

Video: Product unboxing, initial setup, paper loading, app connection, and printing demonstration.

2.3 Replacing the Paper Roll

To replace the paper roll in your M110 printer:

  1. Long press the Power Button for 3 seconds until the Display lights up.
  2. Open the "Print Master" app.
  3. Tap [Scan] in the app. (Ensure printer is connected to the app first).
  4. Take out the unused paper roll from the printer.
  5. Scan the QR code on the Anti-loosening Sticker of the new paper roll. This helps the app identify the label size.
  6. Hold both sides of the Top Cover and pull it upwards to open it.
  7. Take out the Paper Roll Spindle.
  8. Remove the Movable Damper from the spindle.
  9. Place the new paper roll onto the spindle, ensuring the printing side is upward.
  10. Reinstall the Movable Damper and push it to the edge of the paper roll.
  11. Peel off the Anti-loosening Sticker from the side that is marked with an arrow.
  12. Insert the ends of the Paper Roll Spindle into the slots on the sides of the Paper Compartment, making sure the arrow on the fixed guide is pointing upwards.
  13. Pull out the label paper until it is higher than the paper exit, and then close the cover.
  14. The Paper Exit will automatically feed out a blank piece of label paper, indicating calibration is completed.
Paper roll loading instructions

Image: Step-by-step visual guide on how to load a new paper roll into the Phomemo M110 printer.

2.4 Identifying Label Sizes

If there is no QR code on your paper roll box, you can manually identify the label size:

  1. Find Specifications: Look for label specifications on the information side of the paper roll box.
  2. Manual Input: In the app, click on [New Label] on the homepage and select [Newly created by blank label]. Input the corresponding label width and height.
  3. Measure Label: If specifications are not available, measure the length and width of a single label with a ruler. Then, input these measurements into the app as described above.

Note: Always connect the printer to the app before scanning or manually inputting label sizes to ensure proper redirection to the editing page.

2.5 Downloading and Installing the PC Application

For PC printing, follow these steps:

  1. Long press the Power Button for 3 seconds until the Display lights up.
  2. Connect the printer to your computer using the original Type-C to Type-A USB cable.
  3. Visit ms.printsupport.cn/?mo=M110 to download the "Labelife" application.
  4. Install the "Labelife" application on your PC.

For detailed application guides for the PC software, please visit the official website: https://labelife.cc

3. Operating Instructions

3.1 App User Guide (Manual Connection)

If auto-connect fails or you prefer manual connection:

  1. Select your printer model (M110 Series) within the app.
  2. Click on the top left corner of the app interface to initiate connection.
  3. The app will search for your printer.
  4. Once found, the app will indicate "Connected".

3.2 App Permission Description

The "Print Master" app requires certain permissions to function correctly:

  • For iOS users:
    • Internet Access: The app requires access to the Internet for full functionality.
    • Bluetooth Permission: The app needs Bluetooth permission to connect to the printer.
  • For Android users:
    • Bluetooth Permission: The app requires Bluetooth permission to connect to the printer.
    • Nearby Devices Permission: For Android 12 and above, permission to search for nearby Bluetooth devices is required. For systems below Android 12, GPS permission is needed.
    • Bluetooth Pairing Request: You may be prompted to pair with the M110. You can simply tap "Pair" without checking "Allow access to your contacts and call history."

3.3 Operator Panel Instructions

The printer's display and buttons provide direct control and information:

Display Instructions

IndicatorDescription
Top Cover openedIndicates the printer's top cover is open.
SettingsAccesses printer settings.
Label TypeShows current label type (Gap Label, Black Mark Label, Continuous Label).
Bluetooth connectedIndicates successful Bluetooth connection.
Printer Serial Number (SN Code)Displays the unique serial number of the printer (e.g., Q155C-21X78921).
Feeding/PrintingIndicates the printer is feeding paper or actively printing.
Charging statusShows if the printer is charging.
Battery LevelDisplays the current battery charge level.
Information Display AreaGeneral area for status messages (this is the standby interface).

Button Instructions

ButtonOperationFunction
Power ButtonLong press for 3sPower on/off
Power ButtonPress onceWhen in standby mode, access main menu for selection.
Feed ButtonPress onceWhen in standby mode, feed out paper. When in main menu, access sub-menu for selection.

Note: After selecting an option in a sub-menu, the system will automatically revert to the standby interface if there is no further activity for 10 seconds.

Menu Instructions

Main MenuSub-menuExplanation
LanguageEnglishChoose language
Print Darkness4(Weak), 6(Normal), 10(Dark)Choose print density
Paper Gap typeContinuous, Gap, BlackChoose label type
Auto Power OFF5 Minutes, 15 Minutes, 30 Minutes, 1Hour, 2Hour, 4Hour, 8Hour, 24Hour, NO Close (default option)Schedule automatic shut down
Restore To Factory Settings/Reset the device to factory settings
Firmware VersionShow firmware version/
Device AddressShow device address/
Test printTest printPrint device information

4. Cleaning and Maintenance

Important: Always ensure the printer is turned off before performing any cleaning or maintenance.

If you experience issues such as blank lines, blurry print, or missing characters, it may be caused by dirt on the Print Head. Follow these steps to clean the print head:

  1. If you have just finished printing, wait for at least 30 minutes for the Print Head to cool down completely.
  2. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains.
  3. Wait 5-10 minutes for the alcohol to evaporate completely. After this, the cleaning is done, and you can continue using the printer.
Diagram of print head cleaning

Image: Diagram illustrating the location of the print head for cleaning.

5. Troubleshooting

This section addresses common issues you might encounter with your Phomemo M110 Label Printer.

5.1 Common Issues and Solutions

  • Printer Not Turning On:
    Ensure the printer is charged. Connect it to a power source using the provided Type-C cable and a DC 5V/2A power adapter. Long press the power button for 3 seconds.
  • Printing Issues (Blank lines, blurry print, missing characters):
    This is often caused by a dirty print head. Refer to the "Cleaning and Maintenance" section for instructions on how to clean the print head. Also, ensure the label paper is loaded correctly with the printing side facing upwards.
  • Bluetooth Connection Problems:
    Verify that Bluetooth is enabled on your smartphone. Check the app's permissions to ensure it has access to Bluetooth and nearby devices (especially for Android 12+). Try restarting both the printer and your phone. If auto-connect fails, attempt a manual connection through the app.
  • Labels Not Feeding Correctly:
    Ensure the paper roll is properly seated on the spindle and the movable damper is pushed to the edge of the roll. Make sure the label paper is pulled out slightly beyond the paper exit before closing the cover.
  • App Functionality Issues / "Sign a Plan" Message:
    Some advanced features within the "Print Master" app might require a subscription or specific plan. Review the app's terms of service or contact Phomemo support for clarification on feature availability.

6. Specifications

FeatureSpecification
BrandPhomemo
ModelM110
Product NamePhomemo M110 Label Printer
Product Size114 x 87 x 62mm
Product Weight381g
Printing MethodThermal Printing (Ink-free)
Print Resolution203dpi
Print Speed20-60mm/s (20ppm)
Battery TypeBuilt-in Lithium Battery (1200mAh)
Charging MethodType-C
Connection MethodType-C / Bluetooth
Printing Width20-50mm (0.78 to 1.96 inches)
Supported OSiOS + Android
ApplicationFor Commercial use
Internal MemoryNone
Voltage100-240V
Network PrintingWireless
Double-sided PrintingNo
CertificationCE, FCC, RoHS

7. Warranty and Support

7.1 Safety Instructions

Please read and adhere to the following safety instructions:

  • Manual Cutter: The manual cutter has sharp edges. Do not touch the edges of the cutter to avoid injury.
  • Print Head: The print head can become HOT during or after printing. Touching it when hot can cause burns. Before touching the Print Head, please wait for at least 30 minutes after turning off the printer to allow it to cool down.
  • Electrical Safety: Pay attention to electrical safety. Do not disassemble, crush, or puncture the battery. This product is not a toy.
Diagram of manual cutter and print head

Image: Diagram highlighting the manual cutter and print head, areas requiring caution.

7.2 Charging Instructions

To charge your Phomemo M110 Label Printer:

  1. Prepare your own power adapter (DC 5V/2A) with a Type-A port.
  2. Insert the Type-C end (flat end) of the USB cable into the M110's Type-C Port.
  3. Insert the Type-A end (wide end) of the USB cable into the Type-A port of the power adapter.
  4. After connecting to an outlet, check the Display: "Charging..." will be displayed when off, or a battery icon will appear in the top right corner when on.
  5. For a complete charge, wait 2-3 hours or until "Charge Finished" is displayed.

Caution: Avoid using the printer while charging, as this may lead to reduced charging speed, compromised print quality, and shortened battery life. The printer may heat up during charging; avoid placing it on flammable materials. Unplug the charger promptly once fully charged.

Charging connection diagram

Image: Diagram showing how to connect the Type-C cable to the printer and a Type-A power adapter for charging.

7.3 FCC and ISED Compliance

This device complies with Part 15 of the FCC Rules and ISED Canada's licence-exempt RSS(s). Operation is subject to the following conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device. It generates and can radiate radio frequency energy. If interference occurs, try reorienting the receiving antenna, increasing separation between equipment, or connecting to a different circuit. Consult a dealer or technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

7.4 European Union Declaration of Conformity

Zhuhai Quin Technology Co., Ltd. declares that the Phomemo M110 Label Maker (Model: M110) conforms to the Radio Equipment Directive 2014/53/EU and EU Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU (amended by EU 2015/863), and carries the CE-marking (first affixed in 2024).

The product complies with standards including SAFETY: EN IEC 62368-1:2020+A11:2020, EN 62479:2010; EMC: EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:2019+A2:2021, ETSI EN 301 489-1 V2.2.3(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09); Radio: ETST EN 300 328 V2.2.2 (2019-07); RoHS: EN IEC 63000:2018.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and used under license by Zhuhai Quin Technology Co., Ltd. Apple, iPhone, iPad, iPod are trademarks of Apple Inc. Android and Google Play are trademarks of Google Inc.

For further support or inquiries, please refer to the official Phomemo website or contact their customer service.

8. User Tips

  • App Functionality: Be aware that some advanced features within the "Print Master" app might require a subscription or specific plan. Check the app's details to ensure it meets your needs before relying on specific functionalities.
  • Printing Quality: For optimal print quality and to avoid labels getting stuck, ensure the label paper is loaded correctly with the printing side facing upwards and the paper roll is properly seated. Regular cleaning of the print head is also crucial.
  • Connectivity: If you experience connection issues, try restarting both your printer and your mobile device. Ensure the "Print Master" app has all necessary permissions (Bluetooth, location for older Android versions) enabled.

9. Frequently Asked Questions (FAQ)

Q: Does the Phomemo M110 printer support printing in Hebrew?
A: The "Print Master" app supports over 20 languages, including Chinese, English, Japanese, Korean, Arabic, Hebrew, and Portuguese. Therefore, it should support printing in Hebrew.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.