Introduction
The YMOBD Dual-Mode Bluetooth OBD Car Detector, model YMIOT, is a versatile diagnostic tool designed to connect to your vehicle's On-Board Diagnostics II (OBD-II) port. It allows you to monitor various vehicle parameters, read and clear diagnostic trouble codes (DTCs), and access essential vehicle information directly from your Android or iOS smartphone or tablet via Bluetooth. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your device.
Setup
Package Contents
- YMOBD Dual-Mode Bluetooth OBD Car Detector (YMIOT)
The device is typically supplied in a sealed anti-static bag.

Device Installation
- Locate the OBD-II Port: The OBD-II port is usually located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
- Plug in the Device: With the vehicle's ignition off, firmly plug the YMOBD detector into the OBD-II port. Ensure it is securely seated.
- Power On: Turn your vehicle's ignition to the 'ON' position (engine does not need to be running). The device should power on, indicated by an LED light (if present).

App Installation and Bluetooth Pairing
- Download a Compatible App: Search for