Phenyx Pro PTAU-2

Contents

Phenyx Pro PTAU-2 True Diversity Wireless Microphone System

User Manual

Introduction

The Phenyx Pro PTAU-2 system is designed to provide effortless control and reliable performance in challenging audio environments. It addresses common wireless transmission issues such as interference, dead zones, and frequency drops. The system features a precise shuttle jog dial for intuitive navigation of functionalities, replacing complex multi-button setups. Engineered with robust features, the PTAU-2 ensures flawless sound for various applications, from bustling outdoor events to high-stakes conferences.

Phenyx Pro PTAU-2 Wireless Microphone System Overview

Box Content

Upon unboxing your Phenyx Pro PTAU-2 system, please verify that all the following components are included:

  • 1 x Dual-channel Wireless Receiver
  • 2 x Handheld Transmitters
  • 1 x 1/4” Audio Cable
  • 4 x Antennas
  • 1 x Power Adapter
  • 1 x 6.35 MM to 3.5 MM Adapter
  • 1 x User Manual
Image showing all components included in the Phenyx Pro PTAU-2 box: wireless receiver, two handheld microphones, audio cable, antennas, power adapter, 6.35mm to 3.5mm adapter, and user manual.
All components included in the PTAU-2 package.

Setup Instructions

1. Receiver Setup

  1. Connect Antennas: Screw the four included antennas into the antenna jacks on the rear panel of the wireless receiver.
  2. Power Connection: Connect the power adapter to the DC 12V IN port on the receiver and plug it into a power outlet.
  3. Audio Output: Connect the receiver to your audio mixer, speaker, or amplifier using the 1/4" mixed output or individual balanced XLR outputs. Cables are not included, except for a 1/4" audio cable.
Diagram showing the Phenyx Pro PTAU-2 receiver connected to a mixer and speaker, illustrating multi-device compatibility with 1/4 inch mixed output and balanced XLR outputs.
Multi-Device Compatibility: Connecting the receiver to other audio devices.
Close-up of the Phenyx Pro PTAU-2 receiver's rear panel, showing the power jack, 1/4 inch mix output, balanced XLR output, and antenna jacks.
Receiver Rear Panel Connections.

2. Handheld Transmitter Setup

  1. Battery Installation: Unscrew the bottom part of the handheld microphone to access the battery compartment. Insert two AA batteries, ensuring correct polarity.
  2. Protective Film: Please remove the protective plastic film from the LCD screen of the microphone before use.
Diagram of the handheld microphone showing its components: IR window, power button, LCD screen, frequency number, real-time battery indicator, transmitter power signal, and gain/mute indicator.
Handheld Microphone Controls and Components.

Operating Instructions

1. Power On/Off

  • Receiver: Press the power button on the front panel of the receiver.
  • Microphone: Long press the power button on the handheld microphone to turn it on or off.

2. Navigation with Shuttle Jog Dial

The receiver features an innovative shuttle jog dial for accessing all settings. Twist the dial to navigate through menu options and press to select.

Close-up of the Phenyx Pro PTAU-2 receiver's display and shuttle jog dial, showing menu navigation for settings like Volume, RF. SET, Tune, Squelch, UHF.ID, Scan, Spectrum, Tx. SET, Auto Lock, and Language.
Innovative Shuttle Jog Dial for accessing all settings.

3. Frequency Management

The PTAU-2 offers comprehensive tools for optimal frequency selection and management.

  • Auto Scan: Use the Auto Scan function to automatically detect and avoid busy channels, selecting the best available frequency for your system from 2x1000 frequencies.
  • Spectrum Analyzer: The built-in spectrum analyzer allows you to visually map your RF distribution and manage your frequencies, as well as those of other wireless systems, ensuring a clean transmission environment.
Diagram illustrating the Auto Scan and Spectrum Analyzer features of the Phenyx Pro PTAU-2 receiver, showing how to optimize frequencies for clean transmission.
Effortless Frequency Management with Auto Scan and Spectrum Analyzer.

4. Advanced ID Lock Function

The ID Lock function ensures enhanced audio stability and security. It locks the selected frequency, allowing only the matched handheld microphone to transmit audio, preventing interference from other microphones on the same frequency.

  • To activate or deactivate ID Lock, navigate through the receiver's menu using the shuttle jog dial.
Diagram showing the Advanced ID Lock feature, ensuring priority access to a chosen frequency and suppressing same-frequency interference.
Advanced ID Lock: Ensuring priority access and suppressing interference.

5. Signal Adaptability (TX.SET & Squelch)

Tailor the system's performance to various scenarios by adjusting transmitter power and receiver sensitivity.

  • Transmitter Power (TX.SET): Selectable power options (5mW, 10mW, 30mW) allow you to increase power for extended range in large venues or reduce it to save battery in smaller settings.
  • Receiver Sensitivity (Squelch): Customize receiver sensitivity (High, Mid, Low) to minimize disruptions and suit environmental needs and microphone placement.
Image showing flexible adaptability settings for TX.SET (transmitter power) and Squelch (receiver sensitivity) with options for High, Mid, and Low.
Flexible Adaptability: Adjusting transmitter power and receiver sensitivity.

6. Microphone Mute Function

A short press of the power button on the handheld microphone will mute the microphone. Press again to unmute.

Maintenance

To ensure the longevity and optimal performance of your Phenyx Pro PTAU-2 system, follow these maintenance guidelines:

  • Cleaning: Regularly wipe down the receiver and microphones with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Battery Replacement: Replace AA batteries in the handheld transmitters when the low battery indicator appears on the microphone's LCD screen. Always use fresh, high-quality batteries.
  • Storage: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from microphones before long-term storage.
  • Antenna Care: Handle antennas carefully to prevent bending or damage. Ensure they are securely connected during operation.

Troubleshooting

If you encounter issues with your PTAU-2 system, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No sound from microphoneMicrophone muted, low battery, incorrect frequency, receiver not powered, audio cable disconnected.Short press mic power button to unmute. Replace batteries. Perform Auto Scan or manually select frequency. Ensure receiver is powered on and connected. Check audio cable connections.
Interference or dropoutsOther wireless devices, long distance, obstacles, low transmitter power.Use Auto Scan to find a clear frequency. Activate ID Lock. Increase transmitter power (TX.SET). Adjust receiver sensitivity (Squelch). Reduce distance between mic and receiver. Remove obstacles.
Poor sound qualityIncorrect gain settings, environmental noise, damaged microphone capsule.Adjust receiver gain. Ensure microphone is used within optimal range. Check for physical damage to the microphone.
Microphone not pairingIR sync failed, incorrect settings.Ensure IR windows are aligned during sync. Re-attempt IR synchronization. Check receiver and microphone settings.

User Tips

  • Frequency Selection: Always use the Auto Scan feature before an event to find the clearest frequencies, especially in new or crowded environments.
  • Battery Management: Keep spare AA batteries on hand, and monitor the real-time battery indicator on the microphone's LCD screen to avoid unexpected power loss during performances.
  • Microphone Compatibility: For optimal performance and to prevent compatibility issues, it is recommended to use only Phenyx Pro microphone heads and components with your PTAU-2 system.
  • Range Optimization: For larger venues or when experiencing signal drops, increase the transmitter power (TX.SET) to 30mW and adjust receiver sensitivity to 'High' for extended coverage.

Specifications

FeatureDetail
Brand NamePhenyx Pro
ModelPTAU-2
StyleHandheld Microphone
UseStage Performance Wireless Microphone
TransducerDynamic Microphone
Set TypeMulti-Microphone Kits
CommunicationWireless
Polar PatternsCardioid
PackageYes
Built-in BatteryNo
DiaphragmS-Mall
OriginMainland China
CertificationCE, FCC, RoHS, WEEE
Connector Type6.35 mm Jack
Included ComponentsUHF
ID Lock FunctionYes
Lock FunctionYes
Auto-scan FunctionYes
SQL SettingYes
Spectrum AnalyzerYes
Adjustable Transmitter PowerYes
Mic Switch FunctionON/MUTE/OFF
Coverage DistanceUp to 400ft
Sync ModeIR sync
Number of Frequency2 x 1000
Frequency Range512-562 MHz
Modulation ModeFM
Available Bandwidth25 KHz per channel
Frequency Stability±0.005%
Dynamic Range>110 dB
Peak Deviation±45 KHz
Frequency Response60 Hz-18 KHz (±3 dB)
S/N Ratio>105 dB
Total Harmonic Distortion<0.5%

Warranty and Support

Genuine Phenyx Pro audio products, including the PTAU-2 system, come with a 12-month manufacturer assurance. This warranty covers manufacturing defects and ensures supportive customer service for troubleshooting or replacement of discontinuous/defective parts. For any support inquiries, please contact Phenyx Pro customer service.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.