1. Introduction
The TOKQI M02 is a versatile 3-axis handheld gimbal stabilizer designed for smartphones, offering advanced features to enhance your video recording experience. It provides stable, shake-free footage, intelligent tracking, and a range of creative shooting modes. This manual will guide you through the setup, operation, and maintenance of your M02 gimbal.
Video 1: TOKQI M02 Product Overview and Features
2. Setup Guide
2.1 Unlocking the Gimbal
Important: When you receive the M02 gimbal, both the pan axis and the tilt axis are locked. You must unlock these two axes before use. Failure to do so can damage the motor.
Image 1: Three-Axis Stabilization Diagram
2.2 Phone Compatibility
Ensure your smartphone meets the following specifications for optimal performance:
- Weight: ≤280g
- Thickness: ≤11mm
- Width: 50~90mm
- Operating System: Android 9.0 and above; iOS 11 and above
Image 2: Applicable Mobile Phone Instructions
2.3 Mounting Your Smartphone
Carefully place your smartphone into the gimbal's phone clamp, ensuring it is centered and securely held. Proper balancing helps the gimbal operate efficiently and conserves battery life.
2.4 Charging the Gimbal
The M02 gimbal features a built-in, non-removable 2600mAh battery. Connect the included USB cable to the charging port on the gimbal and a suitable power source. Charging typically takes about 3 hours.
Image 3: Super Battery Life (2600mAh)
2.5 App Installation and Connection
Download the official "Gimbal Show" app from your smartphone's app store (App Store for iOS, Google Play for Android). Once installed, enable Bluetooth on your phone and open the app. The gimbal's Bluetooth name will appear as "M02-XXXXXX". Select it to pair and connect.
Image 4: Exclusive APP: Gimbal Show
3. Operating Instructions
3.1 Power On/Off
Press and hold the M button (Remote control power button) on the gimbal's handle to power it on or off.
3.2 Gimbal Modes
The M02 offers seven distinct gimbal modes for various shooting scenarios:
- Semi-follow Mode: Follows pan and tilt movements, keeping the roll axis locked.
- Full follow Mode: Follows all three axes (pan, tilt, roll).
- Fully Locked Mode: Locks all three axes, keeping the camera fixed in one direction.
- POV Mode: Provides a first-person view, following all movements of the operator.
- Inception Space Mode: Creates a spinning effect, rotating the phone 360 degrees.
- Semi-follow Go Mode: Similar to Semi-follow but with faster response.
- Full follow Go Mode: Similar to Full follow but with faster response.
Image 5: Seven Gimbal Modes Overview
3.3 Intelligent Multifunctional Remote Control
The M02 features a detachable remote control with a magnetic connection for easy removal and installation. It allows for wireless control of the gimbal up to 10 meters away.
Remote Control Functions:
- M button/Remote control power button: Powers the remote on/off. Double-click to quickly switch between horizontal and vertical shooting.
- Lockout button: Locks the gimbal's orientation.
- Camera button: Triggers photo capture or video recording.
- Joystick: Controls gimbal rotation (pan and tilt).
- Zoom/Multiplier control wheel: Adjusts zoom or focus in real-time. Note: Zoom/focus function may not be supported by all phone models.
Image 6: Intelligent Multifunctional Remote Control
Image 7: Multi-Functional Keyboard
3.4 AI Tracking and Object Tracking
The M02 gimbal supports intelligent face and object tracking, ensuring the subject remains in the center of the frame. This feature can be used via the "Gimbal Show" app or with an optional AI Tracking Module (no app needed).
To activate Object Tracking:
- Method One: Long press the trigger button on the gimbal.
- Method Two: Long press the lock button on the gimbal.
Image 8: Intelligent Tracking in Action
Image 9: Object Tracking Activation Methods
3.5 Optional Magnetic AI Tracking Module
If you have the optional AI Tracking Module, it magnetically attaches to the gimbal. This module enables intelligent face tracking and gesture control without the need for the "Gimbal Show" app.
Image 10: Optional Magnetic AI Tracking Module
3.6 Optional Magnetic Fill Light Module
The optional Magnetic Fill Light Module attaches easily to the gimbal. It offers multiple adjustable light effects and brightness levels (3 colors and 9 levels) to illuminate your subjects.
Image 11: Optional Magnetic Fill Light Module
3.7 App-Exclusive Features
The "Gimbal Show" app unlocks a variety of creative shooting functions:
- LIFE Mode, One-Touch Film: Synchronize video, music, and transition effects for easy film production.
- Massive Selection of Templates: Discover creative ways to make shooting easy with pre-designed templates.
- Gesture Control: Take photos or recordings and switch shooting modes using hand gestures.
- PANO CloneMe: Create panoramic shots (180°, 3x3) and clone yourself in multiple positions within a single frame.
- Dyna-Zoom: Achieve a visually appealing movie-quality blockbuster effect by dynamically zooming.
- Timelapse: Capture stunning time-lapse videos with static, left-to-right, right-to-left, and custom track modes.
Image 12: Gesture Control
Image 13: PANO CloneMe Examples
Image 14: Dyna-Zoom and Timelapse
3.8 Using the Tripod
The M02 gimbal can be equipped with a mini tripod for stable, hands-free shooting. Simply attach the tripod to the 1/4" standard screw mount at the bottom of the gimbal.
Image 15: Gimbal Equipped with Tripod
4. Maintenance
- Keep the gimbal clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the gimbal to extreme temperatures or moisture.
- Store the gimbal in its original packaging or a protective case when not in use to prevent damage.
- Do not attempt to disassemble or repair the gimbal yourself, as this will void the warranty.
5. Troubleshooting
- Gimbal not powering on: Ensure the battery is charged. Connect the gimbal to a power source and try again.
- Gimbal shaking or not stabilizing: Verify that the pan and tilt axes are unlocked. Ensure your phone is properly mounted and centered in the clamp, and that its weight and dimensions are within the supported limits.
- Cannot pair with Android phone: Make sure Bluetooth is enabled on your phone and the "Gimbal Show" app is open. Restart both the gimbal and your phone, then attempt pairing again.
- App features not working: Check your phone's operating system version (Android 9.0+ or iOS 11+). Ensure the app is updated to the latest version. Some phone models may not support all app features (e.g., manual focusing).
- AI Tracking Module not working: Ensure the module is securely attached. If using the app, verify the app is correctly configured for tracking.
6. Specifications
| Feature | Specification |
|---|---|
| Model | TOKQI M02 |
| Supported Mobile Device Weight | ≤280g |
| Supported Mobile Device Thickness | ≤11mm |
| Supported Mobile Device Width | 50~90mm |
| Battery Type | Built-in, non-removable |
| Battery Capacity | 2600mAh |
| Charging Time | About 3h |
| Work Time | 7-8h |
| APP Name | Gimbal Show |
| Supported Mobile Phone System | Android 9.0 and above; iOS 11 and above |
| Bluetooth Name | M02-XXXXXX |
| Gimbal Working Modes | Semi-follow, Full follow, Fully Locked, POV, Inception Space, Semi-follow Go Mode, Full follow Go Mode |
| Tracking Mode | Face tracking, Object tracking (in app) |
| Gesture Operation | Yes (in app) |
| Selfie Stick Mode | Yes |
| Zoom Function | Yes (in app), but some phones do not support manual focusing |
| Manual Focusing | Yes (in app), but some phones do not support manual focusing |
| Panning Angle | 300° |
| Rolling Angle | 325° |
| Titling Angle | 80° |
| Material | PA66 |
| Folded Size | 157 x 106 x 65mm |
| Product Weight | 360g |
| Wireless Remote Control Distance | 10m |
| Certifications | CE, FCC, RoHS |
7. User Tips
- Initial Setup: Always remember to unlock the pan and tilt axes before powering on the gimbal to prevent motor damage.
- Android Pairing: If you encounter issues pairing with an Android device, ensure your phone's Bluetooth is active and the "Gimbal Show" app is running. Sometimes restarting both devices can resolve connection problems.
- Optional Modules: Note that AI modules are not sold separately and must be purchased as part of a gimbal set. Light modules may be available separately, but it's best to check product options.
- Balancing: Take a moment to properly balance your phone in the clamp. This reduces strain on the motors and improves stabilization.
- Explore the App: The "Gimbal Show" app offers many creative features. Experiment with different modes and templates to discover new ways to capture content.
8. Warranty and Support
For any product-related issues, technical support, or warranty claims, please contact the TOKQI Official Store customer service. Refer to your purchase documentation for specific warranty terms and contact information.
