1. Product Overview
This manual provides instructions for the HQCAM CCTV Industrial Live 3G-SDI Camera. This camera is designed for various professional applications including industrial monitoring, medical imaging, live broadcasting, and more. It features SDI signal output and supports 1080P resolution at various frame rates depending on the sensor model.
Video Description: A short demonstration of the HQCAM SDI camera, showcasing its compact size, various ports (SDI, CVBS, OSD, DC12V), and the process of attaching a lens.
2. Setup Instructions
2.1 Package Contents
- 1 x HQCAM SDI Camera
- 1 x Lens (pre-attached or separate, depending on model)
2.2 Power Supply
The camera requires a DC12V 2A power adapter (not included). Ensure you use a compatible power supply to avoid damage.
Image Description: A typical 12V 2A power adapter with interchangeable plugs (US, EU, AU, UK) is shown, with a clear note that it is NOT INCLUDED with the camera.
2.3 Camera Connections
The camera features SDI and CVBS outputs, an OSD control switch, and a DC12V power input. It also has a standard 1/4" screw thread for mounting.
Image Description: A detailed diagram of the camera's rear panel, labeling the SDI output, CVBS output, OSD switch, and DC12V power input. Dimensions are also provided: 42.5mm height and 48.8mm length.
2.4 Connection Diagram
To operate the camera, connect it to an SDI digital video recorder (DVR) or an SDI to HDMI converter. Ensure your display supports the output resolution and frame rate (e.g., 1080P at 50Hz/60Hz).
Image Description: A comprehensive connection diagram illustrating various ways to integrate the SDI camera into a system. This includes connecting to an SDI Repeater, SDI to HDMI converter (for HD display), SDI DVR, and SDI Encoder/Decoder for IP network integration.
- Direct to DVR: Connect the camera's SDI output to an SDI DVR using an HD-SDI video cable.
- To HDMI Display: Connect the camera's SDI output to an SDI to HDMI converter, then connect the converter's HDMI output to an HD display.
- Power: Connect the DC12V 2A power adapter to the camera's DC12V input.
3. Operating Instructions
3.1 Initial Power-Up
Once all connections are secure and power is supplied, the camera will begin operating. Verify the video feed on your connected display or DVR.
3.2 On-Screen Display (OSD) Menu
The camera features an OSD menu for configuration. Access the OSD menu using the OSD switch located on the rear panel. Navigate through the menu options to adjust settings such as resolution, image parameters, day/night mode, and more.
Note: If you experience issues displaying 1080P 50Hz or 60Hz images, use the CVBS output to display the screen and access the OSD menu. From there, change the resolution to 1080P 30Hz or lower for proper display.
4. Maintenance
4.1 General Care
- Keep the camera clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the camera to extreme temperatures, humidity, or direct sunlight for prolonged periods.
4.2 Safety Precautions
The following instructions are for qualified personnel only. To reduce the risk of electric shock, do not perform any maintenance work other than what is described in this manual.
- Do not place the equipment on an uneven surface.
- Do not install in direct sunlight, near heating equipment, or in very cold environments.
- Do not place the device near conducting objects.
- Do not attempt to repair the equipment yourself.
- Do not allow anything that is easy to accumulate or leak to get on the product.
- Do not install near any strong magnetic sources.
- Do not place heavy objects on the product.
- Do not expose the module to radiation.
5. Troubleshooting
5.1 No Video Output / Image Issues
- Check Power: Ensure the DC12V 2A power adapter is correctly connected and supplying power.
- Check Cables: Verify all SDI/CVBS video cables are securely connected and not damaged.
- Display Compatibility: If using 1080P 50Hz/60Hz, ensure your display supports these refresh rates.
- Resolution Adjustment: If 1080P 50Hz/60Hz images cannot be displayed, connect to the CVBS output, access the OSD menu, and change the resolution to 1080P 30Hz or lower.
- Converter/DVR: Ensure your SDI to HDMI converter or SDI DVR is functioning correctly.
5.2 Equipment Failure
If the equipment fails, disconnect its DC power head and contact the seller for further analysis or support.
6. Specifications
6.1 General Specifications
- Brand: HQCAM
- Style: Box Camera
- Shell Material: Metal
- Connectivity: Closed System/CCTV Wired (SDI, CVBS)
- Installation: Normal
- Power Source: Normal (DC12V)
- Power Supply(V): 12V
- Dimensions (L x W x D): Approximately 48.8mm x 42.5mm x 42.5mm (excluding lens)
- Operating Temperature: -10°C to 60°C
- Certification: CE
6.2 Lens Specifications
- Lens (mm): 2.8-12mm
- Zoom: 4X
- Lens Quantity: Single Lens
- Viewing Angle: 90°
6.3 Sensor and Video Specifications
The camera is available with different sensor options, each with specific performance characteristics:
IMX385 Sensor Parameters
| Feature | Description |
|---|---|
| Image Sensor | Color 1/1.8" Sony IMX385 CMOS Sensor |
| Total Pixels | 1952 (H) * 1241 (V) Approx. 2.42 Mega Pixel |
| Effective Pixels | 1945 (H) * 1225 (V) Approx. 2.38 Mega Pixel |
| Resolution | Digital: 1080P (60fps/30fps) |
| Min-Illumination | Color: 0.00001Lux, Color: DSS: 0.000001Lux |
| Video Output | Digital: EX-SDI (1080p); Analog: HD-ADH (1080P), CVBS (960H) |
| WDR SNR | 120dB |
| EX-SDI Distance | BNC Cable 75-3 can transmit 500 meters or above. |
IMX290 Sensor Parameters
| Feature | Description |
|---|---|
| Image Sensor | 1/2.8" SONY CMOS(IMX290) |
| Total Pixels | 2000(H) x 1241(V) Approx. 2.48M pixels |
| Effective Pixels | 1984(H) x 1105(V) Approx. 2.19M pixels |
| Resolution | Digital: 1080(60p), 720(60p) |
| Min. Illumination | Color: 1.0 lux, BW: 0.5 lux, Color:DSS:0.017 lux, BW DSS: 0.0008 lux |
| Video Output | HD-SDI, Analog: NTSC/PAL CVBS |
IMX307 Sensor Parameters
| Feature | Description |
|---|---|
| Imaging Sensor | 1/2.9" 2.0M SONY IMX307 Exmor CMOS |
| Total Pixels | 2000(H) x 1241(V) |
| Effective Pixel | 1984(H) x 1105(V) |
| Resolution | Digital: 1920x1080p (1080p/30fps), 1280x720p (720p/60fps) |
| Minimal Illumination | Color: 0.1 Lux@ (F2.0, AGC ON), B/W: 0.01 Lux@ (F2.0, AGC ON) |
| Video Output | HD-SDI: SMA connector, CVBS: BNC connector |
| HD-SDI Distance | SDI dedicated video cable (ND5C-2V 75ohm) 500m |
7. User Tips
- OSD Menu Access: If you encounter display issues with 1080P 50Hz/60Hz, always use the CVBS output to access the OSD menu and adjust the resolution to a compatible setting (e.g., 1080P 30Hz).
- Mounting: The camera features a standard 1/4" screw thread on its top surface for easy mounting with compatible brackets.
- Power Adapter: Remember that the DC12V 2A power adapter is not included. Ensure you have one ready for operation.
8. Warranty and Support
8.1 Product Updates Disclaimer
The parameters of the camera you purchased may not match the specifications in this manual. This is because the camera may undergo updates, and we may not be able to update the manual in a timely manner. The final explanation rights belong to our company.
8.2 Technical Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your seller or the manufacturer directly.