Recordio GAX-MD44

Contents

Recordio GAX-MD44 Professional 24-bit/192kHz Audio Interface

Model: GAX-MD44

1. Introduction

The Recordio GAX-MD44 is a professional 4-input, 2-output USB audio interface designed for studio and live recording. It delivers high-fidelity 24-bit/192 kHz audio resolution, ensuring that all microphone, electric guitar, bass, and other instrument connections capture every detail with studio-grade quality. This interface is built to provide ultra-low latency monitoring and is compatible with most mainstream audio recording software.

GAX-MD44 Professional Audio Interface
Figure 1: GAX-MD44 Professional Audio Interface

2. Package Contents

Please check the box for the following items:

  • GAX-MD44 Audio Interface (x1)
  • USB to Type-C Cables (x2)
  • English User Manual (x1)
GAX-MD44 Package Contents
Figure 2: Contents of the GAX-MD44 package

3. Specifications

FeatureSpecification
Product NameGAX-MD44 professional 24bit 192kHz Interface de Audio
Number of Preamplifiers4
A/D Resolution24-bit/192kHZ
Number of Instrument/Mic Inputs4
Phantom Power48V DC
Connection PortUSB
Connection ProtocolUSB2.0
Dimensions (H*W*L)51 mm * 121 mm * 260 mm
Analog OutputRL (Left/Right)
Appearance StructureDesktop
Headphone Output2
Power Supply ModeUSB power supply / Type-C
Voltage RangeUSB (5-20V DC)
Built-in BatteryNo
Inbox AdaptorNo

4. Controls and Connections

Familiarize yourself with the various controls and connection points on your GAX-MD44 audio interface.

GAX-MD44 Front and Rear Panel Diagram
Figure 3: Front and Rear Panel Layout of the GAX-MD44

Front Panel Controls:

  • PILOT LAMP: Power indicator.
  • 48V INDICATOR LIGHT: Indicates when 48V phantom power is active.
  • GAIN KNOB (1L, 2R, 3L, 4R): Adjusts the input gain for each respective channel.
  • HI-Z BUTTON: Engages high impedance mode for direct instrument input (e.g., guitar).
  • MIC/LINE/XLR INPUT INTERFACE: Combo jacks for connecting microphones (XLR) or line-level instruments (1/4" TRS/TS).
  • LOW CUT: Activates a low-cut filter to remove unwanted low-frequency rumble.
  • MONO/LOOP BACK/FX BUTTON: Multi-function button for mono summing, loopback, or effects.
  • MIX KNOB: Blends direct input signal with playback from the computer for monitoring.
  • VOLUME KNOB: Controls the overall main output volume.
  • HEADPHONE KNOB: Adjusts the volume of the headphone outputs.
  • HEADPHONE JACK: 1/4" TRS outputs for headphones.

Rear Panel Connections:

  • USB POWER (5V DC): Auxiliary power input (if needed, not always required when connected to PC USB).
  • POWER SOURCE: Indicator for power status.
  • PC USB: USB 2.0 port for connecting to your computer.
  • OUT: Unspecified output.
  • LINE OUTPUT: 1/4" TRS line outputs.
  • MAIN OUT: RCA main outputs.
  • PHANTOM POWER SWITCH (CH1-2 +48V, CH3-4 +48V): Activates 48V phantom power for condenser microphones on channels 1-2 and 3-4 respectively.
  • TYPE-C POWER INPUT: Alternative or additional power input via Type-C.

5. Setup Guide

5.1 Powering the Device

  1. Connect one of the provided USB to Type-C cables from the GAX-MD44's "PC USB" port to an available USB port on your computer.
  2. The device is primarily powered via USB (5-20V DC). If additional power is required or if connecting to a device that doesn't provide sufficient power, use the "USB POWER (5V DC)" or "TYPE-C POWER INPUT" with an appropriate power adapter (not included).
  3. The PILOT LAMP on the front panel should illuminate, indicating the device is powered on.

5.2 Connecting to Your Computer

  1. Ensure your computer is turned on.
  2. Connect the GAX-MD44 to your computer using the "PC USB" port and one of the supplied USB cables.
  3. Your operating system (Windows, macOS) should automatically detect the GAX-MD44 as an audio device. For optimal performance, it is recommended to check the Recordio website for any specific drivers or software.
  4. Select the GAX-MD44 as your input and output audio device in your computer's sound settings and your Digital Audio Workstation (DAW) software.
GAX-MD44 USB Interface Connection
Figure 4: Connecting the GAX-MD44 via USB to a computer

5.3 Connecting Instruments and Microphones

Refer to the connection diagram for typical setups:

GAX-MD44 Connection Application Diagram
Figure 5: Various connection possibilities with the GAX-MD44
  • Microphones: Connect XLR microphones to the MIC/LINE/XLR INPUT INTERFACE. If using condenser microphones, activate 48V phantom power using the PHANTOM POWER SWITCH for the respective channels. The 48V INDICATOR LIGHT will illuminate.
  • Instruments: Connect instruments like electric guitars or basses to the MIC/LINE/XLR INPUT INTERFACE using a 1/4" TS cable. Press the HI-Z button for optimal impedance matching.
  • Line-Level Devices: Connect keyboards, synthesizers, or other line-level devices to the MIC/LINE/XLR INPUT INTERFACE using 1/4" TRS/TS cables.
  • Headphones: Plug your headphones into the HEADPHONE JACKs.
  • Studio Monitors/Speakers: Connect your studio monitors to the LINE OUTPUT (1/4" TRS) or MAIN OUT (RCA) ports.

6. Operation

6.1 Recording

  1. Ensure all inputs are connected as described in the Setup Guide.
  2. Open your preferred Digital Audio Workstation (DAW) software (e.g., Ableton Live, Logic Pro, Pro Tools, Cubase, FL Studio).
  3. In your DAW's audio settings, select the GAX-MD44 as your input device.
  4. Create new audio tracks and assign the corresponding input channels from the GAX-MD44.
  5. Adjust the GAIN KNOB for each input channel to achieve a healthy signal level without clipping (distortion).
  6. Arm the tracks for recording and begin your performance.

6.2 Monitoring

The GAX-MD44 features ultra-low latency monitoring, allowing you to hear your input signal directly without noticeable delay.

  • Direct Monitoring: Use the MIX KNOB to blend between your direct input signal and the playback from your computer. This is crucial for real-time monitoring during recording.
  • Headphone Monitoring: Adjust the HEADPHONE KNOB to control the volume of your headphones.
  • Speaker Monitoring: Adjust the main VOLUME KNOB to control the output level to your studio monitors.
No Delay Monitoring Feature
Figure 6: Ultra-low latency monitoring for recording and mixing

6.3 Software Compatibility

The GAX-MD44 is compatible with most mainstream audio software on computers and tablets, providing flexibility for your recording workflow.

Compatible Recording Software
Figure 7: Compatibility with various recording software

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners or solvents.
  • Storage: Store the GAX-MD44 in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the device with care. The sturdy metal case provides protection, but excessive force or drops can cause damage.
  • Cable Management: Ensure cables are not kinked or strained to prevent damage to the connectors and ports.

8. Troubleshooting

Common Issues and Solutions:

  • No Power:
    • Ensure the USB cable is securely connected to both the GAX-MD44 and your computer.
    • Try a different USB port on your computer.
    • If using an external power adapter (not included), ensure it is correctly connected and functional.
  • No Sound Input/Output:
    • Verify that the GAX-MD44 is selected as the default audio input/output device in your computer's sound settings and your DAW.
    • Check all cable connections (microphones, instruments, speakers, headphones).
    • Ensure input GAIN KNOBs are turned up and output VOLUME/HEADPHONE KNOBs are not at minimum.
    • If using condenser microphones, ensure 48V phantom power is activated for the correct channels.
    • Check the MIX KNOB position; adjust it to hear your input signal.
  • Distorted Sound:
    • Reduce the input GAIN KNOB if the signal is clipping (indicated by red lights on the input channels).
    • Check for damaged cables.
  • Latency Issues (Delay in Monitoring):
    • Ensure you are using the direct monitoring feature with the MIX KNOB.
    • In your DAW, reduce the buffer size in the audio settings. Note that very low buffer sizes may strain your computer's CPU.
  • Driver Issues:
    • While the GAX-MD44 is generally class-compliant, visit the Recordio Official Store or manufacturer's website to download and install the latest drivers if you experience connectivity or performance issues.
    • For Apple compatibility, macOS typically supports USB audio devices without additional drivers.
  • Multitrack Recording:
    • The GAX-MD44 supports hardware 4-channel input. Ensure your DAW is configured to recognize and record from all available input channels simultaneously. Consult your DAW's manual for specific multitrack recording setup instructions.

9. User Tips

  • Driver Check: Even if your system detects the device, always check the manufacturer's website for dedicated drivers. These often unlock full functionality and improve performance.
  • Multitrack Setup: For recording multiple instruments or microphones simultaneously, ensure your Digital Audio Workstation (DAW) is correctly configured to recognize all 4 input channels of the GAX-MD44.
  • Phantom Power: Remember to only activate 48V phantom power for condenser microphones. Dynamic microphones and ribbon microphones generally do not require it and can sometimes be damaged by it.
  • Gain Staging: Set your input gain levels carefully. Aim for a strong signal that doesn't peak into the red, to avoid distortion and ensure a clean recording.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official Recordio documentation or contact the Recordio Official Store.

A comprehensive user manual in PDF format is available for download: GAX-MD44 User Manual (PDF)

For further assistance, please contact the seller or visit the Recordio Official Store online.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.