JIKONG JK-B1A8S10P

Contents

JIKONG Smart Active Balancer BMS User Manual

Model: JK-B1A8S10P Series

Lithium Battery Active Balance Protection Board

1. Product Overview

The JIKONG Smart Active Balancer BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates advanced features for voltage acquisition, high-current active balancing, overcharge/over-discharge protection, overcurrent protection, over-temperature protection, coulomb counting, Bluetooth communication, and optional GPS remote functionality.

This BMS is suitable for LiFePO4, Li-ion, and LTO battery types, supporting 4S-8S configurations. Its core technology relies on energy transfer active balancing, capable of achieving a continuous 1A balance current (or 2A for specific models). This ensures battery consistency, extends battery life, and delays aging.

The system is complemented by a mobile application (APP) compatible with Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. The compact design and comprehensive functionality make it ideal for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG JK-B1A8S10P+4.3 Display BMS with a 4.3-inch touch display
Figure 1.1: JIKONG JK-B1A8S10P+4.3 Display BMS with a 4.3-inch touch display.
Overview of JIKONG intelligent active balance power management system (BMS) installed in an electric scooter
Figure 1.2: JIKONG intelligent active balance power management system (BMS) installed in an electric scooter, highlighting key features.

2. Functional Characteristics

The JIKONG BMS offers a wide range of features to ensure optimal battery performance and safety:

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation (iOS/Android/HarmonyOS)
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display (optional 4.3-inch touch display)
  • Accurate time logging
  • Support RS485 communication (optional)
  • Support CAN communication (optional)
  • Support heating function (optional)
  • Support parallel function (optional)
  • Support alarm function
  • Support GPS communication (optional)
  • Discharge precharge function (optional)
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Rich interface options for JIKONG BMS including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer
Figure 2.1: Rich interface options for JIKONG BMS, including CAN, RS485, BT, NTC, and various control switches.
Multi-screen display and data connection via mobile phone Bluetooth APP, PC software, and JIKONG home storage display
Figure 2.2: Multi-screen display and data connection options via mobile APP, PC software, and dedicated display.

3. Specifications

The following tables detail the general and default parameters for the JIKONG BMS.

3.1. General Parameters

ParameterValueUnit
Supply Voltage10-36V
Operating Power Consumption<900mW
Operating Temperature-30 to 70°C
Maximum Number of Collection Strings8Strings
Maximum Balancing Current1 (JK-B1A8S models), 2 (JK-B2A8S models)A
Maximum Charging Current100 (JK-B1A8S10P), 200 (JK-B1A8S20P, JK-B2A8S20P), 300 (JK-B2A8S30P)A
Maximum Discharge Current100 (JK-B1A8S10P), 200 (JK-B1A8S20P, JK-B2A8S20P), 300 (JK-B2A8S30P)A
Maximum Instantaneous Current200 (JK-B1A8S10P), 300 (JK-B1A8S20P, JK-B2A8S20P), 400 (JK-B2A8S30P)A
Maximum Internal Loop Resistance0.8mΩ
Protection Board Dimensions (JK-B1A8S10P)153.9 × 107 × 17.6mm
Finished Weight411g
Product Parameters table for JIKONG BMS models
Figure 3.1: Detailed product specifications for various JIKONG BMS models.

3.2. Default Parameters

The following table provides default parameter settings for different battery chemistries. These can be adjusted via the APP.

ParameterLi-Ion (Default)LiFePO4 (Default)LTO (Default)Unit
Balancing Initial Voltage332V
Maximum Balancing Current111A
Unit Overcharge Voltage4.23.62.7V
Single Overcharge Protection Recovery4.183.552.65V
Monomer Undervoltage Protection2.822.61.8V
Single Undervoltage Protection Recovery2.852.651.85V
Automatic Shutdown Voltage2.82.51.7V
SOC-0% Voltage2.92.61.85V
SOC-100% Voltage4.183.52.65V
Trigger Balancing Differential Pressure0.010.010.01V
Charging Overcurrent Protection Delay303030S
Charge Overcurrent Protection Release Time606060S
Discharge Overcurrent Protection Delay300300300S
Discharge Overcurrent Protection Release Time606060S
Short-circuit Protection Delay150015001500µS
Charging Overtemperature Protection Temperature707070°C
Charge Overtemperature Restore Temperature606060°C
Discharge Overtemperature Protection Temperature707070°C
Discharge Overtemperature Recovery Temperature606060°C
Charging Low Temperature Protection Temperature-20-20-20°C
Charge Low Temperature to Restore Temperature-10-10-10°C
MOS Overtemperature Protection Temperature100100100°C
MOS Overtemperature Protection Recovery Temperature808080°C
Device Address000/
Discharge Precharge Time000S

Note: The data tolerance range is ±2mm for physical dimensions.

Product specification diagram for JK-B1A8S10P, showing dimensions
Figure 3.2: Dimensions of the JK-B1A8S10P model (153.9mm x 87mm x 17.6mm).
Product specification diagram for JK-B2A8S20P, showing dimensions
Figure 3.3: Dimensions of the JK-B2A8S20P model (153mm x 126mm x 17.6mm).
Product specification diagram for JK-B2A8S30P, showing dimensions
Figure 3.4: Dimensions of the JK-B2A8S30P model (174.77mm x 127.26mm x 17.6mm).

4. Installation and Wiring

The JIKONG JK-B1A8S-10P series protection board is designed for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all cables are connected correctly and securely before powering on the BMS.

4.1. Packing List

Before installation, verify that all components are present:

  • BMS x 1
  • Sampling line x 1 (70cm long)
  • NTC (Temperature Sensor) x 1 (40cm long)
  • Switch x 1 (50cm long)
Packing List for the JIKONG BMS
Figure 4.1: Standard packing list for the JIKONG BMS.

4.2. Wiring Diagrams

Carefully follow the wiring diagrams below for your specific battery configuration. Incorrect wiring can lead to malfunction or damage.

Wiring diagram for a 4-string cell battery
Figure 4.2: Wiring method for a 4-string cell battery. Connect all cables, insert the cable into the BMS, and connect the B-line and P-line to the battery.
Wiring diagram for an 8-string cell battery
Figure 4.3: Wiring method for an 8-string cell battery. Connect all cables, insert the cable into the BMS, and connect the B-line and P-line to the battery.

General Wiring Steps:

  1. Connect all balance cables to the battery cells, ensuring correct polarity and sequence.
  2. Insert the balance cable connector into the designated port on the BMS.
  3. Connect the main negative (B-) line from the battery pack to the B- terminal on the BMS.
  4. Connect the main positive (P-) line from the load/charger to the P- terminal on the BMS.
  5. If applicable, connect the C- terminal for charging to the charger negative.
  6. Connect the NTC temperature sensor to the BMS.
  7. Connect the switch key to the BMS.
  8. For models with a display, connect the display cable to the BMS.

4.3. Interface Definition (Pinout)

The BMS features various interfaces for balancing, acquisition, display, temperature sensing, buzzer, GPS, communication (RS485, CAN), and parallel modules. Refer to the detailed pinout tables in the official PDF user manual for precise connections. A summary of key interfaces is provided below:

InterfaceFunction
P1 (Balance with Acquisition)Connects to individual cell voltage taps (B1-B8) and battery total negative (B-) and positive (B+).
P2 (Display Interface)Power output for display, RS485 signals (A, B), activation signals (K+, K-), and negative terminal (GND).
P3/P4 (Temperature Interface)Connects NTC temperature sensors (T1A, T1B, T2A, T2B, etc.).
P5 (Buzzer Interface)Buzzer power supply positive (VCC) and negative (GND).
P6 (GPS Interface)GPS power (VGPS), UART TX/RX (3.3V), and power/signal ground (GND).
P7 (Communication Interface)RS485 signals (A, B) and CAN signals (H, L), and signal ground (GND).
P8 (Parallel Interface)Parallel module enable signal (P-EN) and status signal (P-status).
Heating WireConnects to the negative electrode of the heater element (HT-).
P- TerminalConnects to external load or charger negative terminal (M6 screws).
B- TerminalConnects to the negative battery terminal (M6 screws).

5. Operation

5.1. Device Activation

Before powering on the protection board, double-check all balance cable connections and ensure the P- and B- lines are correctly connected. Confirm that the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.

The BMS does not have a physical power-on switch. It is designed for charging activation. After completing the battery assembly, connect a charger (with voltage 2V higher than the battery voltage) to activate the BMS.

Alternatively, if you have an optional display screen and button, you can activate the BMS by connecting the display cable and pressing the button.

5.2. APP Installation and Parameter Setting

The JIKONG BMS can be managed and monitored via a mobile APP. Scan the QR code below to download the official APP. Android Version 7 or higher is required.

QR code for JIKONG Mobile APP
Figure 5.1: Scan this QR code to download the JIKONG Mobile APP.

Once the APP is installed and connected via Bluetooth, you can access the parameter settings. It is crucial to set the correct battery type (LiFePO4, Li-ion, or LTO) and basic battery parameters such as the number of cells, battery capacity, and trigger equalization differential pressure. You can also perform voltage and current calibration.

For detailed instructions on parameter settings, refer to the “Instructions for Setting Protection Board Parameters” document, which can be found via the PDF link provided by the seller: JIKONG User Manual (PDF).

5.3. Active Equalization

The BMS uses active equalization to transfer energy from higher-voltage cells to lower-voltage cells. The default balance current is 1A. You can adjust the balance current via the APP, but it is recommended not to exceed 0.2C of the battery capacity. If not needed, the balancing function can be turned off in the APP.

5.4. Heating Function (Optional)

For low-temperature environments, the optional heating function can be used with a resistance heater or heating film to maintain battery activity. The designed heating current is 4A. It is recommended to use a normally closed temperature switch (45°C to 65°C) in series with the heating circuit as a secondary protection.

5.5. Battery Parallel Function (Optional)

This function allows for parallel connection of battery packs, requiring synchronous use with parallel modules. Ensure the “disable charging current limiting” function is turned off in the APP.

5.6. Communication Functions (Optional)

The BMS supports optional CAN and RS485 communication. Users can set the address and communication protocol via the APP according to their specific requirements. Refer to the JIKONG Protection Board communication protocol document for details.

Mobile app interface for selecting CAN protocols
Figure 5.2: Mobile app interface for selecting CAN protocols, compatible with various inverter brands.

6. Troubleshooting and Protection Features

The JIKONG BMS is equipped with multiple protection mechanisms to ensure battery safety and longevity. When a protection is triggered, the BMS will take action to prevent damage and will typically recover automatically once conditions return to normal.

6.1. Overvoltage and Undervoltage Protection

  • Charge Overvoltage Protection: If any cell voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage.
  • Discharge Undervoltage Protection: If any cell voltage drops below the set undervoltage protection voltage during discharge, the BMS will stop discharging. Discharging resumes when all cell voltages rise above the recovery voltage. If a cell drops below the automatic shutdown voltage, the BMS will shut down to protect the battery.

6.2. Overcurrent Protection

  • Charge Overcurrent Protection: If the charging current exceeds the set continuous charging current for a specified delay, the BMS will stop charging. Charging resumes after a set release time.
  • Discharge Overcurrent Protection: If the discharge current exceeds the set continuous discharge current for a specified delay, the BMS will stop discharging. Discharging resumes after a set release time. (Note: Maximum continuous discharge current should not exceed 100A for JK-B1A8S10P).

6.3. Temperature Protection

  • Overtemperature Protection: If battery temperature exceeds the set overtemperature protection value, the BMS will stop charging/discharging. Operation resumes when the temperature drops below the recovery value.
  • Low Temperature Protection: If battery temperature drops below the set low temperature protection value during charging, the BMS will stop charging. Charging resumes when the temperature rises above the recovery value.

6.4. Short Circuit Protection

The BMS includes short circuit protection. If a short circuit is detected, the BMS will immediately stop operation. Recovery occurs after a set delay. If a short circuit occurs when connecting a charger for the first time, increasing the short circuit protection delay in the APP may resolve it if the issue is due to high peak current from the charger. Similarly, for loads with large capacitance, increasing the discharge short-circuit protection delay can prevent false triggers.

6.5. Emergency Switch

In case of critical issues like over-temperature, over-discharge, over-charge, or cell imbalance during normal use, activating the emergency switch via the APP will enable both charging and discharging for 30 minutes. This provides an emergency operational window, even if a single cell reaches the automatic shutdown voltage, to prevent immediate system failure.

6.6. Intelligent Sleep

The intelligent sleep function puts the BMS into a low-power standby mode if the charging/discharging current is less than 1A for 26 consecutive hours. This reduces the BMS's self-consumption. To reactivate, use the charger or the optional button.

7. User Tips

  • 24V Battery Compatibility: The JIKONG BMS supports 4S-8S battery configurations. For a 24V battery system, this BMS is suitable, as 24V typically corresponds to 8S LiFePO4 (nominal 25.6V) or 7S Li-ion (nominal 25.9V), both within the supported range.
  • Balancing Current Adjustment: While the default balancing current is 1A (or 2A for some models), it is advisable to adjust it via the APP based on your battery's capacity. A common recommendation is not to exceed 0.2C of the battery capacity for balancing.
  • Low Temperature Operation: If operating in extremely cold environments, consider utilizing the optional heating function to protect your battery cells and maintain performance.
  • APP Parameter Review: Always review and adjust the default parameters in the mobile APP to match your specific battery chemistry and application requirements for optimal safety and performance.

8. Support and Warranty

For technical support, detailed communication protocols, or specific parameter setting instructions, please refer to the official JIKONG documentation, including the comprehensive PDF user manual available at JIKONG User Manual (PDF).

JIKONG Technology Co.LTD is committed to providing high-quality products and support. For any issues not covered in this manual, please contact JIKONG customer service.

© 2024 JIKONG Technology Co.LTD. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.