Introduction
Thank you for choosing the DEKO 12V Cordless Drill Set. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

General Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection.
- Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times.
- Use the correct tool for your application. Do not force the tool.
- Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing power tools.
Product Overview
Familiarize yourself with the components of your DEKO 12V Cordless Drill.

Package Contents:
- 1 x 12V Cordless Drill
- 1 x Type-C Charge Cable
- 1 x Magnetic Bit Holder (60 mm)
- 6 x Twisted Drill Bits (2, 2.5, 3, 4, 5, 6 mm)
- 6 x Screwdriver Bits (SL4, SL6, PH1, PH2, PZ1, PZ2)
- 1 x User Manual (this document)

Setup
1. Charging the Battery
The drill features a built-in lithium battery. Before first use, ensure the battery is fully charged.
- Locate the Type-C charging input port at the base of the drill handle.
- Connect the provided Type-C charging cable to the drill and a universal charger or USB output.
- The Battery Charge Indicator Lights will show the charging status.

Battery Charge Indicator Lights:
- Three lights illuminated: >90% charge
- Two lights illuminated: >66% charge
- One light illuminated: <33% charge

2. Attaching/Changing Bits
The drill is equipped with a 3/8-inch keyless chuck for fast and easy bit changes.
- Ensure the drill is off and the forward/reverse switch is in the neutral (locked) position.
- Grip the rear half of the chuck firmly and rotate the front half counter-clockwise to open the chuck jaws.
- Insert the desired drill bit or screwdriver bit into the chuck. Ensure it is seated properly.
- Rotate the front half of the chuck clockwise to tighten the jaws securely around the bit.
- To remove a bit, rotate the front half counter-clockwise. If a bit is stuck, use reverse rotation briefly to loosen it.

Operating Instructions
1. Powering On/Off and Speed Control
- To turn the drill on, press the Variable Speed Control Trigger. The drill speed is controlled by the amount of pressure applied to the trigger.
- To turn the drill off, release the trigger.
- The built-in LED light will illuminate when the trigger is pressed, providing visibility in dark work areas.

2. Forward/Reverse Operation
The Forward/Reverse Switch allows you to change the direction of rotation.
- Push the switch to the left for forward rotation (for drilling and tightening screws).
- Push the switch to the right for reverse rotation (for loosening screws or removing stuck bits).
- For safety, place the switch in the center position to lock the trigger and prevent accidental starting.
3. Applications
This cordless drill is suitable for various tasks:
- Screw Driving: Use appropriate screwdriver bits to tighten or loosen screws.
- Drilling Wood: Select suitable twisted drill bits for drilling holes in wood.
- Drilling Plastic: Use appropriate drill bits for plastic materials.
- Drilling Metal: Use appropriate drill bits for light metal drilling.

Maintenance
1. Cleaning
- Always disconnect the drill from any charging source before cleaning.
- Use a soft, damp cloth to wipe down the exterior of the drill. Do not use harsh chemicals or abrasive cleaners.
- Keep the ventilation openings clear of dust and debris to prevent overheating.
2. Storage
- Store the drill and accessories in a clean, dry place, away from direct sunlight and extreme temperatures.
- Ensure the forward/reverse switch is in the locked (center) position to prevent accidental activation.
- Store the drill in its original case to protect it from damage.
3. Battery Care
- For optimal battery life, avoid completely discharging the battery before recharging.
- If storing for extended periods, charge the battery to approximately 50% capacity.
- Do not expose the battery to water or extreme heat.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drill does not turn on. | Battery is discharged. Forward/Reverse switch is in the locked position. | Charge the battery. Move the switch to forward or reverse position. |
| Reduced power or speed. | Low battery charge. Overloading the drill. | Recharge the battery. Reduce pressure or use a larger drill bit for the task. |
| Bit slips in chuck. | Chuck not tightened sufficiently. Bit shank is dirty or damaged. | Tighten the chuck firmly. Clean or replace the bit. |
| Drill overheats. | Blocked ventilation slots. Continuous heavy use. | Clear ventilation slots. Allow the drill to cool down. |
Specifications
| Feature | Detail |
|---|---|
| Model | DKCD12XL02G-S2 |
| Voltage | 12V |
| No-load Speed | 0-800 r/min |
| Max Torque | 12 N.m |
| Chuck Size | 3/8-inch (Keyless) |
| Battery Capacity | 1500mAh |
| Charging Type | USB Type-C |
| Weight (Net) | 1.65 lbs (0.75 kg) |
| DIY Supplies | Woodworking |
| Package Dimensions (L x W x H) | 29 cm x 21 cm x 7 cm |
| Package Weight | 1.45 kg |

User Tips
- For delicate tasks, start with low speed and gradually increase pressure on the trigger for more control.
- When drilling into harder materials, apply steady, even pressure and allow the drill to do the work.
- Always ensure the bit is securely fastened in the chuck to prevent slippage and potential injury.
- Keep the drill bits sharp for efficient drilling and to prolong the life of your tool.
- The compact and lightweight design makes this drill ideal for overhead work or in tight spaces.


Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official DEKO website. Keep your purchase receipt as proof of purchase.