1. Introduction
Welcome to the SUPERFIRE L22 High Power LED Flashlight manual. This portable and powerful flashlight is designed for various uses, offering strong illumination and reliable performance. Featuring a 60W output, 5000LM brightness, a 5000mAh Type-C rechargeable battery, and 6 versatile lighting modes, the L22 is built with an IP44 waterproof rating and a durable aluminum alloy body. Please read this manual carefully before use to ensure proper operation and maintenance.
The SUPERFIRE L22 Flashlight, highlighting its compact size and powerful performance with key specifications.
Product demonstration video showcasing the flashlight's brightness, battery installation, and waterproof capabilities.
2. Setup
Battery Installation
Upon receiving your flashlight, please open the battery compartment. Remove the white insulating sheet and carefully peel off the transparent insulating protective film from the battery. Insert the battery into the flashlight, ensuring correct polarity.
The SUPERFIRE L22 Flashlight shown with its 5000mAh rechargeable battery.
Initial Charging
After battery installation, connect the flashlight to a power source using a 5V/1A Type-C charger. Using a charger with different specifications may prevent normal charging. The red indicator light will flash during charging, and turn blue and stay on once fully charged.
Close-up view of the Type-C charging port on the flashlight.
3. Operating Instructions
Power On/Off and Mode Adjustment
- Press the switch once to turn on the light source.
- Continue to press the switch to cycle through the standard lighting modes: Weak Light → Medium Light → Strong Light → Strobe → SOS → Off.
Ultra-Bright Mode
- Double-click the switch from any mode to activate the ultra-bright gear.
- To turn off the ultra-bright mode, press and hold the switch for 2 seconds.
Indicator Lights
- Charging: The red indicator light flashes.
- Fully Charged: The blue indicator light is continuously on.
- Discharging: The blue indicator light is continuously on.
- Low Voltage: The red indicator light is continuously on.
- Very Low Power: The red indicator light flashes.
Visual representation of the 6 available lighting modes and their effects.
4. Maintenance
- Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid completely draining the battery. Recharge the flashlight regularly, even if not in frequent use. Store the flashlight with a partial charge if it will not be used for an extended period.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
- Flashlight not turning on: Ensure the battery is correctly installed and fully charged. Check that the white insulating sheet and transparent protective film have been removed from the battery.
- Charging issues: Verify that you are using a 5V/1A Type-C charger and that the cable is securely connected. Check the charging indicator light for status.
- Flashlight becomes hot during use: The L22 flashlight features temperature control protection. If the temperature becomes too high, the flashlight will automatically reduce its brightness and limit the gear to prevent overheating and potential burns. This is normal operation.
- Reduced brightness or short runtime: The battery may be low. Recharge the flashlight fully. If the issue persists, the battery may need replacement.
If you encounter any problems that cannot be resolved with the above steps, please contact customer support for assistance.
6. Specifications
Detailed parameter list for the SUPERFIRE L22 Flashlight.
| Feature | Specification |
|---|---|
| Model | L22 |
| Power | 60W |
| Lumen | 5000LM |
| Color Temperature | 7,000K |
| Lighting Modes | 6 Modes (Weak, Medium, Strong, Strobe, SOS, Superbright) |
| Battery Voltage | 3.7V |
| Max Lighting Distance | Approx. 300 meters (990 feet) |
| Runtime | Approx. 6 hours |
| Charging Time | Approx. 4.5 hours |
| Input Voltage | 5V/3A |
| Charging Interface Type | Type-C |
| Battery Type | 26650, 5000mAh |
| Waterproof Class | IP44 |
| Body Material | Aluminum Alloy |
| Weight | 190g |
| Product Size | 133mm * 43mm * 36mm (5.2in * 1.7in * 1.4in) |
| Light Source | LED bulbs |
| Model of LED Beads | SH-S09 |
| Focal Length | Non-adjustable |
| Zoom | No |
| Function | Shock Resistant, Self Defense, Hard Light |
| Certification | CE |
7. User Tips
- First Use: Always ensure the white insulating sheet and transparent protective film are removed from the battery before the first use or charging.
- Charging: For optimal charging and to prevent issues, always use a 5V/1A charger.
- Indicator Awareness: Familiarize yourself with the indicator lights for charging status (red flashing for charging, blue solid for full) and low battery warnings (red solid for low voltage, red flashing for very low power).
- Temperature Protection: The flashlight has built-in temperature control. If it gets too hot, it will automatically reduce brightness to prevent damage. This is a safety feature.
8. Warranty & Support
This product comes with a 1-year manufacturer's warranty. We also offer free technical support and spare parts. If you receive goods with problems, please contact us within 3 days with clear photos or video for assistance. We are committed to helping you resolve any issues you may encounter.
