Cecotec Total Iron 7000 SteamPro Compact Ironing Center

1. Important Safety Information

Please read these instructions carefully before using the appliance. Please keep this instruction manual for future reference or for new users.

• Make sure the mains voltage matches the voltage indicated on the appliance's feature label and that the plug is grounded.
• This appliance is intended for domestic use only. It is not suitable for commercial or industrial use.
• Do not place the appliance near heat sources, flammable substances, wet surfaces where it can fall or be pushed into water, or allow it to come into contact with water or other liquids. Do not use it outdoors.
• The surface of the product may reach high temperatures during operation. Do not leave the appliance unattended while in use.
• Regularly check the power cord for visible damage. If the cable is damaged, it must be replaced by the official Cecotec technical service to avoid any type of danger.
• Always place the unit on a flat surface. Do not cover the device or place objects on it.
• Do not twist, kink, stress or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces.
• Do not let the cord hang over the edge of the work surface.
• Do not immerse the cord, plug, or any non-detachable part of the appliance in water or other liquids, nor expose electrical connections to water.
• Make sure your hands are dry before handling the plug or turning on the appliance.

2. Product Overview

The Cecotec Total Iron 7000 SteamPro is an ultra-powerful compact ironing center designed to tackle even the most stubborn wrinkles with ease. It combines high performance with user-friendly features for efficient and effective ironing.

Figure 1: Cecotec Total Iron 7000 SteamPro Ironing Center

Key Features:

• High Power: 2400 W for rapid heating.
• High Pressure: 6 bars of pressure for effective wrinkle removal.
• Continuous Steam: 135 g/min steam output for professional results.
• Soleplate: Ultra-slippery Turbo Slide ceramic soleplate for smooth gliding.
• Eco Mode: Saves up to 25% energy.
• Large Water Tank: 2.0 L capacity for extended ironing sessions (up to 3 hours).
• Precision Tip: Designed to reach difficult areas of garments.
• Anti-Drip System: Prevents water stains on clothes.
• Cyclo Clean Self-Cleaning System: Extends the lifespan of the ironing center by preventing limescale buildup.
• Auto Shut-Off System: Enhances safety by automatically turning off the appliance.
• DeepClean Spray: Helps lift deeper wrinkles.

3. Setup

1. Unpacking: Carefully remove the ironing center from its packaging. Retain all packaging materials for future storage or transport.
2. Placement: Place the ironing center on a stable, flat, and heat-resistant surface. Ensure there is adequate space around the unit for safe operation.
3. Water Tank Filling: The ironing center features a large 2.0 L water tank. Fill the tank with clean tap water. Do not overfill beyond the 'MAX' indicator. Ensure the tank is securely closed after filling.
4. Power Connection: Plug the power cord into a grounded electrical outlet. Verify that the mains voltage matches the appliance's requirements.

4. Operating Instructions

Figure 2: Ironing with steam

1. Power On: Turn on the ironing center using the designated power button. Allow a few moments for the iron to heat up. The 2400W power ensures quick heating.
2. Temperature Adjustment: Adjust the temperature setting according to the fabric type of your garment. Refer to the garment's care label for recommended ironing temperatures.
3. Steam Function: Once the desired temperature is reached, activate the steam function. The iron delivers 135 g/min of continuous steam for efficient wrinkle removal.
4. Eco Mode: For energy saving, select the Eco mode. This mode reduces energy consumption by up to 25% while still providing effective ironing results.
5. DeepClean Spray: For particularly stubborn wrinkles, use the DeepClean spray function to moisten the fabric before ironing.
6. Precision Ironing: Utilize the precision tip of the Turbo Slide ceramic soleplate to iron around buttons, collars, and other intricate areas of your garments.
7. Auto Shut-Off: The appliance is equipped with an auto shut-off system for safety. It will automatically turn off if left unattended for a period.
8. Continuous Use: The 2.0 L water tank allows for extended ironing sessions, up to 3 hours, without the need for refilling.

Figure 3: Top-down view of the iron during use

5. Maintenance

Figure 4: Iron with AntiCalc feature

• Cyclo Clean Self-Cleaning System: The ironing center features a Cyclo Clean self-cleaning system to prevent limescale buildup. Follow the instructions in the full manual (if available) for specific steps on how to activate and perform this cleaning cycle. Regular use of this system will maintain optimal performance and extend the life of your appliance.
• Anti-Drip System: The integrated anti-drip system helps keep your garments free from water stains, reducing the need for additional cleaning of the soleplate due to drips.
• Soleplate Cleaning: To clean the Turbo Slide ceramic soleplate, ensure the iron is unplugged and completely cool. Wipe the soleplate with a damp cloth and a mild, non-abrasive cleaner if necessary. Do not use harsh chemicals or abrasive pads.
• Exterior Cleaning: Wipe the exterior of the ironing center with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Storage: When not in use, ensure the ironing center is cool and empty of water. Store it in a dry, safe place, away from children.

6. Troubleshooting

If you encounter any issues with your Cecotec Total Iron 7000 SteamPro, please consider the following basic troubleshooting steps:

• Appliance not turning on: Ensure the power cord is securely plugged into a functional, grounded electrical outlet. Check if the power button is pressed.
• No steam or insufficient steam: Check if the water tank is filled to the appropriate level. Ensure the iron has reached the correct temperature setting for steam generation.
• Water leaking: Ensure the water tank cap is securely closed. Verify that the temperature setting is high enough for steam to be generated, as low temperatures can cause water to drip.
• Iron not heating: Confirm the appliance is plugged in and turned on. If the issue persists, there might be an internal fault.

For more complex issues or if troubleshooting steps do not resolve the problem, please contact Cecotec's official technical service.

7. Specifications

8. Warranty & Support

For any issues, repairs, or replacement parts, please contact the official Cecotec technical service. If the power cord is damaged, it must be replaced by the official Cecotec technical service to avoid any type of danger. Please retain your proof of purchase for warranty claims.