1. Important Safety Instructions
Please read these instructions carefully before using the appliance. Please save this instruction manual for future reference or for new users.
- Make sure the mains voltage matches the voltage indicated on the appliance's feature label and that the plug is grounded.
- This appliance is intended for home use only. It is not suitable for commercial or industrial use.
- Do not place the appliance near heat sources, flammable substances, wet surfaces where it can fall or be pushed into water, or allow it to come into contact with water or other liquids. Do not use it outdoors.
- The surface of the product may reach high temperatures during operation. Do not leave the appliance unattended while in use.
- Regularly check the power cord for visible damage. If the cable is damaged, it must be replaced by the official Cecotec technical service to avoid any type of danger.
- Always place the unit on a flat surface. Do not cover the device or place objects on it.
- Do not twist, kink, tension or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces.
- Do not let the cord hang over the edge of the work surface.
- Do not immerse the cord, plug, or any non-detachable part of the appliance in water or other liquids, nor expose electrical connections to water.
- Make sure your hands are dry before handling the plug or turning on the appliance.
2. Product Overview
The Cecotec Ready Warm 5250 Swing Box is a ceramic wall heater designed for efficient heating of rooms up to 20 m². It features advanced ceramic technology for rapid heat distribution and a range of convenient functions.
Key Features:
- Powerful Heating: 2000 W ceramic heating element for quick warmth.
- Multiple Operating Modes: Fan mode, Low mode (1000 W), and High mode (2000 W).
- LED Display: Clear display for current settings and easy modification.
- Remote Control: For convenient adjustment of temperature, modes, and timer.
- Oscillation Function: Lower blade oscillation to distribute heat evenly across the room.
- Programmable Timer: Up to 12 hours, allowing scheduled operation and automatic shut-off.
- IPX2 Protection: Splash-proof design, suitable for safe use in bathrooms.
- Dust Filter: Traps macro dust particles to maintain unit cleanliness and extend lifespan.
- Overheating Protection: Automatic safety shut-off system.
- Wall Installation Kit: Includes all necessary components for secure wall mounting.
Product Views:
3. Package Contents
Please check that all components are present and in good condition:
- Cecotec Ready Warm 5250 Swing Box Ceramic Wall Heater unit
- Remote Control
- Wall Installation Kit (screws, anchors, mounting bracket)
- User Manual
4. Installation
4.1. Wall Mounting
- Choose a Location: Select a suitable wall location, ensuring it is away from heat sources, flammable materials, and direct water spray (though IPX2 rated, avoid direct exposure). Ensure there is sufficient clearance around the heater for proper air circulation.
- Mark Drilling Points: Use the provided mounting bracket as a template to mark the drilling points on the wall. Ensure the points are level.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert the wall anchors if necessary.
- Secure Mounting Bracket: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
- Mount the Heater: Carefully lift the heater unit and align it with the mounting bracket. Secure the heater to the bracket according to the kit's specific instructions.
4.2. Power Connection
Once the heater is securely mounted, plug the power cord into a grounded electrical outlet. Ensure the outlet voltage matches the heater's specifications.
5. Operation
5.1. Control Panel and Remote Control
The heater can be operated using the control panel on the unit or the included remote control. The LED display shows the current temperature and mode settings.
5.2. Power On/Off
- Press the Power button on the control panel or remote control to turn the heater ON or OFF.
5.3. Operating Modes
Press the Mode button to cycle through the available operating modes:
- Fan Mode: Circulates air without heating.
- Low Mode (1000 W): Provides gentle heating at reduced power consumption.
- High Mode (2000 W): Provides maximum heating power for rapid warming.
5.4. Setting Temperature
Use the Temperature Up (+) and Temperature Down (-) buttons on the control panel or remote control to set your desired room temperature. The LED display will show the selected temperature.
5.5. Using the Timer
The timer function allows you to set the heater to operate for a specific duration (up to 12 hours) before automatically turning off.
- Press the Timer button on the remote control.
- Each press will increase the operating time by 1 hour, up to a maximum of 12 hours.
- The display will show the remaining time.
5.6. Oscillation Function
To activate or deactivate the oscillation of the lower blade for wider heat distribution:
- Press the Oscillation button on the remote control.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your heater.
6.1. Cleaning the Unit
- Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Ensure no water enters the internal components.
6.2. Cleaning the Dust Filter
The integrated dust filter helps maintain the heater's efficiency.
- Unplug the heater and allow it to cool.
- Locate the dust filter (refer to the product diagram if available, typically at the air intake).
- Carefully remove the filter.
- Clean the filter using a vacuum cleaner or by rinsing it gently under cool water. Ensure it is completely dry before reinserting.
- Reinsert the clean, dry filter into its position.
6.3. Storage
If storing the heater for an extended period, clean it thoroughly, cover it to protect from dust, and store it in a cool, dry place.
7. Troubleshooting
Before contacting technical service, please refer to the following table for common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; Power cord not plugged in; Power outlet faulty. | Check power connection; Try a different outlet; Ensure main power switch is ON. |
| No heat output. | Heater is in Fan Mode; Temperature setting is too low. | Switch to Low or High heating mode; Increase the desired temperature setting. |
| Heater shuts off unexpectedly. | Overheating protection activated; Unit is covered or airflow is blocked. | Unplug the heater and let it cool down for 30 minutes; Remove any obstructions; Ensure proper ventilation. |
| Remote control not working. | Batteries are dead or incorrectly inserted; Obstruction between remote and heater. | Replace batteries; Ensure correct polarity; Remove obstructions; Point remote directly at the heater. |
8. Specifications
| Feature | Value |
|---|---|
| Model | Ready Warm 5250 Swing Box |
| Brand | Cecotec |
| Type | Ceramic Wall Heater |
| Maximum Power | 2000 W |
| Low Power Mode | 1000 W |
| Recommended Heating Area | Up to 20 m² |
| Protection Rating | IPX2 (Splash-proof) |
| Timer | Up to 12 hours |
| Control | LED Display, Remote Control |
| Dimensions (L x W x H) | 56 cm x 12 cm x 20 cm |
| Weight | 2.85 kg |
| Certification | CE |
9. User Tips
- For optimal heating efficiency, ensure doors and windows of the room are closed when the heater is in operation.
- Utilize the timer function to pre-heat a room before you enter or to automatically turn off the heater when you no longer need it, saving energy.
- Regularly clean the dust filter to maintain air quality and the heater's performance. A clogged filter can reduce efficiency.
- Position the heater where its oscillation function can best distribute warm air throughout the desired area.
10. Warranty and Support
This product is manufactured by Cecotec. For any issues, repairs, or questions regarding your Cecotec Ready Warm 5250 Swing Box ceramic wall heater, please contact the official Cecotec technical service.
- Power Cord Damage: If the power cord is damaged, it must be replaced by the official Cecotec technical service to prevent hazards. Do not attempt to repair it yourself.
- Keep this Manual: Retain this user manual for future reference. It contains important information regarding the safe and efficient operation of your appliance.
