1. Important Safety Instructions
Please read these instructions carefully before using the appliance. Keep this instruction manual for future reference or for new users.
- Ensure the mains voltage matches the voltage indicated on the appliance's feature label and that the plug is grounded.
- This appliance is intended for domestic use only. It is not suitable for commercial or industrial use.
- Do not place the appliance near heat sources, flammable substances, wet surfaces where it can fall or be pushed into water, or allow it to come into contact with water or other liquids. Do not use it outdoors.
- The surface of the product may reach high temperatures during operation. Do not leave the appliance unattended while in use.
- Regularly check the power cord for visible damage. If the cable is damaged, it must be replaced by the official Cecotec technical service to avoid any type of danger.
- Always place the unit on a flat surface. Do not cover the device or place objects on it.
- Do not twist, kink, tension, or damage the power cord in any way. Protect it from sharp edges and heat sources. Do not let it touch hot surfaces.
- Do not let the cord hang over the edge of the work surface.
- Do not immerse the cord, plug, or any non-detachable part of the appliance in water or other liquids, nor expose electrical connections to water.
- Make sure your hands are dry before handling the plug or turning on the appliance.
2. Product Overview
The Cecotec Ready Warm 6770 Crystal Connection is a powerful 2000W glass convector heater designed to provide a warm environment in rooms up to approximately 20 m² or 45 m³. Its modern design, combined with advanced features like Wi-Fi control and a touch panel, makes it a convenient and elegant heating solution for your home.
Key Features:
- Power: 2000W for quick and efficient heating.
- Wi-Fi Control: Manage settings and operation via a smartphone application.
- LED Screen & Touch Control: Intuitive and easy-to-use interface.
- Weekly & Daily Programmer: Schedule operating times and days for personalized comfort.
- 2 Power Levels: Select between Low (1000W) and High (2000W) to suit your heating needs.
- IP24 Anti-Splash Protection: Suitable for use in bathrooms.
- GlassDesign: Modern and elegant tempered glass design.
- Maximum Safety: Features auto-off in case of falls or overheating, a protective grille, and child lock.
Figure 2.1: Angled front view of the convector heater with digital display.
Figure 2.2: Front view of the convector heater.
3. Package Contents
Upon unpacking, please ensure all items are present and in good condition:
- Cecotec Ready Warm 6770 Crystal Connection Convector Heater
- Feet for freestanding installation
- Wall mount bracket and hardware
- Instruction Manual
4. Installation and Setup
The convector heater can be used as a freestanding unit or mounted on a wall.
4.1 Freestanding Installation
- Carefully remove the heater from its packaging.
- Attach the provided feet to the base of the heater using the designated screws. Ensure they are securely fastened.
- Place the heater on a flat, stable surface, away from any flammable materials and at a safe distance from walls or furniture.
4.2 Wall-Mounted Installation
- Identify a suitable wall location, ensuring it is clear of electrical wiring, plumbing, and at a safe distance from flammable materials.
- Use the wall mount bracket as a template to mark the drilling points on the wall.
- Drill holes and insert appropriate wall plugs (if necessary).
- Secure the wall mount bracket to the wall.
- Carefully hang the convector heater onto the wall mount bracket, ensuring it is firmly seated and stable.
Figure 4.1: Side view showing mounting points and feet.
4.3 Wi-Fi Connection
The convector heater can be controlled via Wi-Fi using a smartphone application. Refer to the specific instructions provided with the product or the Cecotec website for detailed steps on connecting your device to your home Wi-Fi network and pairing it with the app.
5. Operating Instructions
The convector heater features an LED screen and a touch control panel for easy operation.
5.1 Power On/Off
- Plug the heater into a grounded electrical outlet.
- Press the power button on the touch control panel to turn the unit on or off. The LED screen will illuminate when powered on.
5.2 Setting Temperature and Power Levels
- Use the '+' and '-' buttons on the touch panel to adjust the desired temperature. The current temperature will be displayed on the LED screen.
- Select between the two power levels: Low (1000W) and High (2000W). The specific button for power level selection is usually indicated by an icon on the control panel.
5.3 Weekly and Daily Programmer
The integrated programmer allows you to set specific time periods and days for the heater to operate automatically. Consult the detailed instructions in the full manual for setting up custom schedules via the touch panel or the smartphone app.
5.4 Wi-Fi Control
Once connected to your smartphone via Wi-Fi, you can remotely control all functions of the heater, including power, temperature, power levels, and programming, directly from the Cecotec application.
Figure 5.1: Close-up of the control panel and LED display.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and efficient operation of your convector heater.
- Always unplug the appliance from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Ensure no water or liquids enter the internal components of the heater.
- Periodically check the air inlets and outlets for dust accumulation. Use a soft brush or vacuum cleaner to gently remove any dust.
- Store the heater in a dry, cool place when not in use, preferably in its original packaging.
7. Troubleshooting
If you encounter issues with your convector heater, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply; power button not pressed; safety feature activated. | Check if the heater is properly plugged in. Ensure the power outlet is functional. Press the power button. If a safety feature (like auto-off for fall/overheating) was activated, unplug, wait for it to cool, and then restart. |
| Heater is on but not heating. | Temperature setting too low; power level set to low; room temperature already reached. | Increase the desired temperature setting. Ensure the power level is set to High (2000W) if maximum heat is desired. The heater will stop heating once the set temperature is reached. |
| Wi-Fi control not working. | Heater not connected to Wi-Fi; app issue; Wi-Fi signal weak. | Ensure the heater is properly connected to your home Wi-Fi network. Check your smartphone's Wi-Fi connection. Restart the app or the heater. |
| Unusual noises or smells. | Dust accumulation; internal fault. | Unplug the heater and clean it thoroughly (refer to Maintenance section). If the issue persists, discontinue use and contact customer support. |
For any issues not covered here, or if problems persist, please contact Cecotec customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | Ready Warm 6770 Crystal Connection |
| Brand | Cecotec |
| Power | 2000 W (Low: 1000 W, High: 2000 W) |
| Recommended Room Size | Approx. 20 m² / 45 m³ |
| Control Type | Wi-Fi, LED Screen, Touch Control Panel |
| Protection Rating | IP24 (Anti-splash) |
| Certification | CE |
| Dimensions (L x W x H) | 92 cm x 24 cm x 43 cm |
| Weight | 8.5 kg |
| Safety Features | Auto-off (fall/overheating), Protective grille, Child lock |
9. User Tips
- Power Consumption: Higher wattage models like the 2000W Ready Warm 6770 will generally consume more electricity than lower wattage models (e.g., 1200W) when operating at full power. To manage consumption, utilize the 1000W low power setting when less heat is needed, and make full use of the weekly/daily programmer to heat only when necessary.
- Optimal Placement: For best heating performance, place the convector heater in a central location within the room, away from drafts and obstructions.
- Wi-Fi Benefits: Leverage the Wi-Fi control feature to pre-heat rooms before you arrive home or to adjust settings without needing to be physically near the unit.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Cecotec website or contact their customer service department. Keep your proof of purchase for any warranty claims.
