Introduction
This manual provides essential instructions for the safe and efficient use of your JP 60V 50A Brushless DC Controller and LCD Display Instrument. Please read this manual thoroughly before installation and operation to ensure proper functionality and longevity of the product.
Setup and Installation
Follow these steps to properly install the controller and display instrument onto your electric scooter or e-skuter.
- Installation Steps: Align the accessory with the scooter interface and gently rotate to secure.
- Connection Check: After installation, gently tug the accessory to confirm it is firmly secured.
Ensure all connections are made correctly according to the wiring diagrams provided. The kit typically includes two controllers and one LCD display instrument.
Controller and Display Components
Display Wiring Details
The LCD display instrument may come with different connector types. Identify the correct connector for your scooter's wiring harness.
Operating Instructions
Once installed, the system is designed for convenient operation.
- Functional Test: Power on the device and verify all functions operate normally.
- Convenient Operation: The display instrument features one-touch control or remote operation for a simple and user-friendly experience. Use the 'MODE' and power buttons to navigate and control settings.
Maintenance
Regular maintenance ensures the longevity and safe operation of your controller and display instrument.
- Regular Inspection: Periodically check for loose screws on all components, especially after prolonged use or rough terrain riding.
- Environmental Protection: Prevent water ingress to avoid damage to the electronic components.
- General Care: Refer to the full user manual for specific guidelines on charging and storage to prevent potential fire hazards and ensure product safety.
Troubleshooting
If you encounter issues, refer to the following common troubleshooting steps:
- Failure to Start: Verify the power connection to the controller and ensure the scooter's battery has a sufficient charge level.
- Abnormal Functionality: If the device behaves unexpectedly, try restarting the scooter or reinstalling the accessory to reset its functions.
- Unstable Connection: For intermittent issues, ensure all interfaces are clean and all screws are fully tightened to secure connections.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Brushless DC Controller & LCD Display Instrument |
| Nominal Voltage | 60V (Adjustable range: 36V-60V) |
| Current Rating | 50A |
| Controller Type | 12-tube Dual Drive |
| Controller Dimensions (approx.) | 150mm x 84mm x 43mm |
| Display Features | Speed, Battery Level, Mode selection |
| Origin | Mainland China |
| High-concerned chemical | None |
User Tips
- Detailed Wiring: For complex installations, carefully examine the wiring on the back of the display unit and the controller harnesses. If a detailed assembly scheme is needed beyond what is provided, consult a professional.
- Environmental Protection: Always avoid using the scooter in the rain to prevent water damage to the electronic components.
- Load Management: Do not overload your scooter beyond its specified weight capacity, as this can strain the controller and motor system.
Warranty and Support
For detailed warranty information, please refer to the terms and conditions provided by your seller at the time of purchase. Support for this product is typically handled by the retailer or manufacturer.
A user manual in PDF format is available for download. You can access it via this link: User Manual (PDF).
WARNING
Please be aware of potential fire hazards and strictly follow the instruction manual for charging and storage. While using the product, please wear appropriate protective equipment and fully comply with applicable laws and regulations.