iScooter iX8

Contents

iScooter iX8 Electric Scooter User Manual

Model: iX8

Brand: iScooter

1. Safety Instructions

Please read and understand all safety instructions before operating the iScooter iX8 Electric Scooter.

  1. This product is suitable for adults and no passengers are allowed.
  2. Please wear a helmet and other protective equipment when you are riding.
  3. Please ride on the road safely and legally.
  4. Practice before riding.
  5. Be careful and safe; both hands and feet should be kept on the scooter.
  6. Don't turn off the power when you are riding.
  7. Please avoid riding over 3 cm steps. Otherwise, it may hurt your body and damage the scooter.
  8. Ride slowly when the road condition is not good.
  9. Please adjust the handlebar to a proper height to ensure safety.
  10. Please do not ride on slippery roads.
  11. Please do not use the product when the temperature is under -10 ℃.
  12. Do not immerse the product into water which is deeper than 3cm to avoid damaging the electrical parts.
  13. Please ride in good weather.
  14. Please charge every 20 days if the product is not used for a long time.

2. Product Overview

The iScooter iX8 is a powerful off-road electric scooter designed for versatile riding. Below is a diagram illustrating its main components.

2.1. Component Diagram

Diagram of iScooter iX8 components
Labeled diagram of the iScooter iX8 Electric Scooter, showing the Display Screen, Control Pad, Trigger Throttle, Front Brake Lever, Rear Brake Lever, Headlight, Folding Mechanism, Right Indicator, Battery Compartment, Kickstand, Rear Suspension, Brake Light, and Rear Disc Brake.

Key Components:

  • Display Screen: Shows speed, battery level, riding mode, and other information.
  • Control Pad: Buttons for various functions and settings.
  • Trigger Throttle: Controls acceleration.
  • Brake Levers: Front and Rear for hydraulic disc brakes.
  • Headlight & Taillight: For visibility and safety.
  • Folding Mechanism: Allows for compact storage and transport.
  • Battery Compartment: Houses the 48V 20Ah Lithium-ion battery.
  • Kickstand: For convenient parking.
  • Rear Suspension: Enhances ride comfort on uneven terrain.
  • Right Indicator & Turn Signals: For signaling turns.

2.2. Package Contents

Package contents of iScooter iX8
Image showing the iScooter iX8 scooter, charger, scooter bag, toolkit, instruction manual, and Allen wrench included in the package.

The package includes the iX8 scooter, a charger, a scooter bag, a toolkit, an instruction manual, and an Allen wrench.

3. Setup: Unfolding & Folding

3.1. Unfolding Steps

  1. Step 1: Disengage Locking Lever

    Press down the silver locking lever to disengage it from the upper groove.

    Step 1 of unfolding: Pressing the silver locking lever
    Image illustrating pressing down the silver locking lever (labeled '1') to release the folding mechanism.
  2. Step 2: Unfold Steering Stem

    While pushing down the silver locking lever, unfold the steering stem upright until you hear a click.

    Step 2 of unfolding: Unfolding the steering stem
    Image showing the steering stem being lifted into the upright position until it clicks into place.
  3. Step 3: Close Red Safety Lever

    Fully close the red safety lever to secure the steering stem.

    Step 3 of unfolding: Closing the red safety lever
    Image demonstrating the red safety lever being closed to lock the steering column.
  4. Step 4: Lock Handlebars

    Lift the handlebars upward until the red locking sleeves slide into the threads. Turn the left and right sleeves in the directions of the arrows to fully lock the handlebars.

    Step 4 of unfolding: Locking the handlebars
    Image showing the handlebars being lifted and the red locking sleeves being turned to secure them.
  5. Step 5: Adjust Handlebar Height

    Adjust the handlebars to the desired height and then close the quick release clamp tightly.

    Step 5 of unfolding: Adjusting handlebar height
    Image illustrating the adjustment of handlebar height using the quick release clamp.

3.2. Folding Steps

  1. Step 1: Unlock Handlebars

    Turn the left and right sleeves in the directions opposite to the arrows to unlock the handlebars. Then fold down the handlebars.

    Step 1 of folding: Unlocking handlebars
    Image demonstrating unlocking and folding down the handlebars.
  2. Step 2: Lower Handlebar Height

    Open the QR (quick release) clamp, adjust the height of the handlebars to the lowest, and then close the QR clamp.

    Step 2 of folding: Lowering handlebar height
    Image illustrating lowering the handlebar height using the quick release clamp.
  3. Step 3: Release Steering Stem Lock

    Hold the steering stem, open the red safety lever, and press down the silver locking lever to disengage it from the lower groove.

    Step 3 of folding: Releasing steering stem lock
    Image demonstrating releasing the steering stem lock by opening the red safety lever and pressing the silver locking lever.
  4. Step 4: Fold Down Steering Stem

    Fold down the steering stem until you hear a click, securing it in the folded position.

    Step 4 of folding: Folding down the steering stem
    Image showing the steering stem being folded down until it locks into place.
Folded iScooter iX8 dimensions
Image showing the folded dimensions of the iScooter iX8 (130*30*46cm) and examples of where it can be stored (Subway, Bus, Trunk, Elevator, Office).

4. Operation

4.1. Display Screen

The smart LCD display provides essential information for your ride.

Smart LCD Display of iScooter iX8
Close-up of the iScooter iX8's Smart LCD Display, showing speed, battery level, and other indicators.

Icons and Meanings

Icon/IndicatorMeaning
TURBO, STD, ECORiding mode: 1 – 6 km/h top speed, 2 – ECO (10 km/h top speed), 3 – STD (15 km/h top speed), 4 – TURBO (25 km/h top speed)
Left/Right IndicatorLeft or Right turn signal activated.
Headlight OnHeadlight is currently on.
Brake AppliedBrake is currently engaged.
Cruise ControlCruise control is active (blinking).
6 km/h Walk ModeScooter is in walk assist mode.
Dual/Single DriveDual: Dual-wheel drive mode; Single: Rear-wheel drive mode.
SpeedometerCurrent speed in MPH or Km/h.
ODO/TRIPODO: Odometer (total distance); TRIP: Trip odometer (current trip distance).
Battery Level and VoltageIndicates remaining battery charge and current voltage.
Max/AVG/ErrorMax: Max trip speed; AVG: Average trip speed; Error: Error code.

Battery Level and Voltage

Battery Level IndicatorVoltage Range
Full battery indicator (Full)50-54.6 V
Three-quarters battery indicator (3/4)48.5-49.9 V
Half battery indicator (1/2)47.5-48.4 V
Quarter battery indicator (1/4)45.5-47.4 V
Low battery indicator (Low)43.5-45.4 V
Blinking low battery indicator (Blinking)41.0-43.4 V

4.2. Buttons & Functions

The control pad on the handlebar allows you to manage various functions of the scooter.

Control Pad with buttons
Close-up of the iScooter iX8 control pad, showing buttons for power, mode selection, lights, and horn.
  • Power On/Off: Press the power button Power button icon for 3 seconds to turn the scooter on or off.
  • Odometer and Trip Odometer: ODO (odometer) and TRIP (trip odometer) will display alternately after the scooter is turned on.
  • Switch between Dual-Motor Drive and Single-Motor Drive: Press the 'M' button M button icon after turning on the scooter.
  • Select Riding Modes: Press '+' or '-' to choose from four modes: 1, 2 ECO, 3 STD, and 4 TURBO after turning on the scooter.
  • Turn On/Off Headlight: Press the headlight button Headlight button icon after turning on the scooter.
  • Turn On/Off Indicators: Press the indicator button Indicator button icon to turn on/off the left or right indicator after turning on the scooter.
  • Sound the Horn: Press the horn button Horn button icon to sound the horn and release to stop the horn after the scooter is turned on.

4.3. Settings

To access and modify scooter settings:

  1. To enter the settings, press the 'M' button M button icon for about 3 seconds after turning on the scooter.
  2. Press the 'M' button M button icon to select between the setting options: P01, P02, P03, P05, P99, and ODO.
  3. After selecting an option, press '+' or '-' to change the settings.
  4. Press the 'M' button M button icon to save the current setting and skip to the next setting option.

Setting Options:

  • P01: Zero/Non-zero Start Selection
    • 00 stands for zero start (motor engages immediately).
    • 01 stands for non-zero start (scooter must be pushed to a certain speed before motor engages).
  • P02: Cruise Control Setting
    • 00 stands for cruise control disabled.
    • 01 stands for cruise control enabled.
  • P03: Startup Acceleration Setting (5 Levels)

    The higher the number, the faster the startup acceleration.

  • P05: System of Units Selection

    Km/h stands for the metric system and MPH stands for the imperial system.

  • P99: Factory Resetting

    Press the 'M' button M button icon for about 5 seconds to factory reset all the settings after entering the settings.

  • ODO: Odometer Resetting

    Press the 'M' button M button icon for about 5 seconds to reset the odometer after entering the settings.

4.4. Speed Modes

The iX8 offers multiple speed modes for different riding conditions and preferences.

Table of 8 speed modes for iScooter iX8
Image displaying a table of 8 speed modes: Original Drive (6, 10, 15, 25 km/h), Rear-wheel Drive (15, 30, 45, 50 km/h), and Dual-wheel Drive (15, 30, 45, 60 km/h).
ModeECO (km/h)RACE (km/h)SPORT (km/h)
Original Drive101525
Rear-wheel Drive304550
Dual-wheel Drive304560

To adjust speed: Press the "M" button five times to unlock the speed. Short press "M" button to switch to dual motor mode.

4.5. Riding Experience

Video showcasing the iScooter iX8 in action, highlighting its folding, dual suspension, powerful motors, and bright headlights for various terrains and conditions.
iScooter iX8 climbing ability
Image showing the iScooter iX8 demonstrating a 25°-30° climbing ability, providing more power to drive.
iScooter iX8 off-road tires
Close-up of the 12-inch off-road pneumatic tires, designed for various terrains including asphalt, sand, speed bumps, and snowy roads.

5. Maintenance

5.1. Lubrication

Add some lubricant on the folding part of the handlebar every 6 months to keep the handlebar working smoothly. Do not add WD-40 lubes or any other lubricant on the front or rear wheel.

5.2. Tyre

Both front and rear tyres are pneumatic tyres. If they are damaged obviously, please contact the distributor to replace them. Please check your scooter every 3 months and make sure all the bolts are secured tightly.

5.3. Brake

This scooter is equipped with front and rear disc brakes. If the braking performance is not good enough, please contact the distributor to replace the brake pads.

iScooter iX8 double braking systems
Image showing the double braking systems: Front and Rear Oil Disc Brakes + Electronic Brakes.

Disc Brake Adjustment

You need a hex wrench to loosen the bolt on the cable clamp.

  • If the disc brake is dragging, slide the arm of the clamp backward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake clamp.
  • If the disc brake does not work efficiently, the cable is slack. You need to slide the arm of the clamp forward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake cable clamp.

Notice: The disc brake may squeak when in use until it is broken in. This is normal and does not affect the brake's function or performance.

To eliminate disc brake noise: For easier operating, we suggest you put the scooter on a stable surface.

  • First, make sure the scooter is turned off.
  • Loosen the two brake caliper mounting bolts (not the bolt on the cable clamp).
  • Reposition the brake caliper to ensure the brake rotor is in the middle of the two brake pads.
  • Keep the brake rotor not touching the brake pads.
  • After repositioning the brake caliper, re-tighten the mounting bolts.

5.4. Battery & Charger

Each scooter has its own battery and charger. Each part has different serial numbers. Do not charge the scooter with chargers of other brands.

iScooter iX8 dual charging ports
Image showing the dual charging ports of the iScooter iX8, allowing for faster charging. Note: iX8 comes with one charger only.

Battery Care:

  • Please charge your scooter after you receive it. It is better to fully charge your scooter before the first ride.
  • Please charge your scooter at least once a month. Long periods without charging will damage the battery.
  • The warranty is invalid if the battery gets deformed or has water ingress.

Charger Information:

  • When the battery is fully charged, the charger will stop charging automatically.
  • The warranty is invalid if the charger gets deformed or has water ingress.

Charging Operation:

  1. Open the charging port cover, insert the DC connector of the charger into the charging port and the AC plug into a wall outlet.
  2. A red indicator light means the scooter is charging, and a green indicator light means a full charge.
  3. Please charge your scooter in a cool, dry, and well-ventilated area.

The battery can be charged circularly at least 600 times. If the range reduces greatly when fully charged, please contact the distributor to replace it with a new battery.

5.5. General Troubleshooting

Please try to solve the problem by yourself if the following occur:

The scooter won't work after powering on:

  1. Check if the battery is low.
  2. Check if the brake lever is in the open position. If not, squeeze the lever and then release it.
  3. Check if all the connectors are connected well.

If you have tried all the solutions and the scooter still won't work, please contact the distributor.

6. Troubleshooting: Error Codes

The display screen may show error codes to indicate specific issues. Refer to the table below for common error codes and their meanings.

Error CodeDescription
10ETransmitting Communication Fault (Yellow)
11EReceiving Communication Fault (Green)
12ERear Motor Controller Fault
13EFront Motor Controller Fault
14EAccelerator Fault
15EBrake Lever Fault
16ERear Motor Hall Fault
17ERear Motor Phase Loss
18EFront Motor Hall Fault
19EFront Motor Phase Loss

7. Specifications

Detailed technical specifications for the iScooter iX8 Electric Scooter.

FeatureSpecification
Model NumberiX8
CategoryTwo-wheel Scooter
CertificationCE
Applicable PeopleUnisex
Unfolding Size127*60*124 cm
Folding Size130*30*46 cm
Weight35.85 kg
Maximum Load150 kg (300 lbs)
Maximum Speed60 km/h (38 MPH) in Dual-wheel Drive
Range Per Charge65-70 km (43 Miles Long)
Battery Capacity48 V, 20 Ah Lithium-ion Battery
Motor Power1,200 W x2 (2400W Max Motor Power)
Charger InputAC 100-240 V, 50/60 Hz
Charger Output54.6 V, 2 A
Charging Time6-8 hours (with one charger)
Tyre Size12 inches
Tyre TypeOff-road Pneumatic Tyres
Front BrakeHydraulic Disc Brake with Electronic Brake
Rear BrakeHydraulic Disc Brake with Electronic Brake

8. User Tips

  • Brake Type: The iX8 features Hydraulic Disc Brakes with Electronic Brake for both front and rear wheels, providing reliable stopping power.
  • Spare Parts: For inquiries regarding spare parts, please contact iScooter customer service directly.
  • Off-Road Performance: Utilize the dual suspension and 12-inch off-road tires for optimal performance and comfort on varied terrain.
  • Battery Maintenance: To maintain battery health and extend its lifespan, charge the scooter at least once a month, even if it's not in regular use.
  • Speed Unlock: If you wish to access higher speeds, remember to press the 'M' button five times to unlock the speed settings.

9. Warranty & Support

9.1. Warranty Information

If any of the parts in the following sheet fail under normal use, please contact us for complete after-sale service.

PartQuality DescriptionWarranty PeriodService
MotorFailure occurs in normal use2 yearsFree of charge
ControllerFailure occurs in normal use6 monthsFree of charge
ChargerFailure occurs in normal use2 yearsFree of charge
BatteryFailure occurs in normal use6 monthsFree of charge
DisplayFailure occurs in normal use6 monthsFree of charge
FrameFailure occurs in normal use1 yearFree of charge

Notice: Please use the scooter in the correct way. The warranty is invalid if failure occurs in abnormal use.

Conditions that Invalidate Warranty:

  1. Haven't maintained according to this manual.
  2. Broken parts caused by dangerous actions.
  3. Disassembling and assembling by users or use of parts of other brands. Broken parts resulting from traffic accidents or impact from external force by users.
  4. Water ingress and lost serial number.
  5. Broken parts caused by riding on very bad roads.
  6. Rental scooter's broken parts caused by force majeure.

9.2. Customer Service

Our friendly customer service team is available to assist you. You can connect with us through the following channels:

A detailed user manual is available in PDF format for download: iScooter iX8 User Manual (PDF)

Thank you so much for your support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.