JIKONG JK-BD6A20S15P

Contents

JIKONG JK-BD6A20S15P Smart BMS User Manual

Model: JK-BD6A20S15P | Brand: JIKONG

Introduction

The JIKONG JK-BD6A20S15P is an advanced Smart Battery Management System (BMS) designed for 8S-20S Li-ion, LiFePO4, and LTO battery packs. It features active balancing with a 0.6A balance current and supports a continuous charge/discharge current of 150A. This BMS provides comprehensive protection functions including overcharge, over-discharge, overcurrent, and short circuit protection, ensuring the safety and longevity of your battery system. It also offers intelligent monitoring and control via Bluetooth APP and PC software, allowing for real-time data viewing and parameter adjustment.

JIKONG JK-BD6A20S15P Smart BMS with included accessories

Figure 1: JIKONG JK-BD6A20S15P Smart BMS and accessories.

Specifications

The JK-BD6A20S15P Smart BMS offers robust performance and features. Below are the detailed technical specifications:

JIKONG Product Specifications table showing various BMS models and their technical indices

Figure 2: JIKONG Product Specifications Table.

JK-BD6A20S15P Key Specifications
FeatureSpecification
Number of Battery Strings8S-20S
Battery TypeLi-ion / LiFePO4 / LTO
Balance FunctionActive Balanced BMS
Balance Current0.6A
Continuous Discharge Current150A
Continuous Charge Current150A
Maximum Discharge Current (MAX)300A
Overcharge Protection Current10-100A
Over Discharge Protection Current10-100A
Other InterfacesRS485, CANBUS, HEAT
Dimensions (L*W*H)162mm * 102mm * 20mm
Wiring OutputCommon Port BMS
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Overcharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Temperature Detection3 Pcs
Protection FunctionsOvercharge, Over Discharge, Overcurrent, Short Circuit, Temperature
Bluetooth FunctionSupport for Android/iOS
Product specification diagram with dimensions of 162mm by 102mm by 16.6mm

Figure 3: BMS Dimensions. Note: Data tolerance range is ±2mm.

Package Contents

The standard package for the JIKONG JK-BD6A20S15P Smart BMS includes the following items:

Packing list showing 1 BMS, 1 switch, 1 NTC, 1 sampling line B, and 1 sampling line A

Figure 4: Packing List.

  • BMS Unit (x1)
  • Switch (x1, 50cm long)
  • NTC Temperature Sensor (x1, 40cm long)
  • Sampling Line B (x1, 70cm long)
  • Sampling Line A (x1, 70cm long)

Additional accessories such as various display units, switch keys, and RS485 communication modules may be available separately. Refer to the seller's product page for more information on compatible accessories.

JIKONG BMS Accessories including 2.5 inch displays, switch key, RS485 module, interface board, 4.3 inch touch display, and 3.2 inch display

Figure 5: Optional JIKONG BMS Accessories.

Setup and Installation

Proper installation and wiring are crucial for the safe and efficient operation of your JIKONG Smart BMS. Please follow these steps carefully:

  1. Connect all balance cables: Ensure all individual cell voltage sampling lines are correctly connected to their respective battery cells.
  2. Insert the cable into the BMS: Once all balance cables are connected to the battery cells, carefully plug the balance cable connector into the designated port on the BMS.
  3. Connect B-line and P-line: Connect the main negative terminal of the battery pack (B-) to the B- terminal on the BMS. Connect the main negative output terminal (P-) from the BMS to your load/charger. The BMS uses a common port for both charging and discharging.

Refer to the wiring diagram below for a visual guide. This diagram illustrates a typical setup for a multi-string battery system.

Wiring diagram for a 24-string cell battery management system, showing connections for B-, P-, NTC, and balance leads

Figure 6: Installation and Wiring Diagram (Example for 24-string cells).

The BMS features a rich interface to meet various communication and control needs:

BMS rich interface diagram showing ports for CAN/RS485, NTC, GPS, Display/Switch, and Hot

Figure 7: BMS Interface Ports.

  • CAN/RS485: For communication with external devices or systems.
  • NTC: For connecting the NTC temperature sensor.
  • GPS: For GPS module connection (if applicable).
  • Display/Switch: For connecting an external display or soft switch.
  • Hot: For heating function control (if applicable).

The BMS is designed with a fully enclosed aluminum alloy shell, providing dustproof, waterproof, anti-voltage, and anti-vibration properties, along with superior heat dissipation.

Image demonstrating the dustproof and waterproof, anti-voltage, and anti-vibration features of the BMS

Figure 8: BMS Durability Features.

Image showing the aluminum alloy shell and its heat dissipation capabilities

Figure 9: Aluminum Alloy Shell for Heat Dissipation.

Operating Instructions

The JIKONG Smart BMS offers intelligent interaction and easy operation through its dedicated mobile application, PC software, and optional external displays.

Mobile Bluetooth APP

Download the "JIKONG SMART BMS" mobile Bluetooth APP, available for iOS, Android, and HarmonyOS systems. The APP supports multiple languages and will automatically switch based on your mobile system settings. It provides a personal lithium battery steward, allowing you to view all kinds of information at a glance.

Mobile Bluetooth APP interface showing real-time battery data like voltage, current, temperature, SOC, alarm status, and cycle count

Figure 10: JIKONG SMART BMS Mobile APP Interface.

Through the APP, you can monitor:

  • Voltage: Total pack voltage and individual cell voltages.
  • Current: Charge and discharge current.
  • Temperature: Battery temperature from NTC sensors.
  • SOC (State of Charge): Remaining battery capacity.
  • Alarm: Status of any active protection alarms.
  • Cycles: Battery cycle count.

You can also freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance settings. Always read the internal parameters of the protection board before making changes.

PC Software and External Displays

In addition to the mobile APP, the JIKONG Smart BMS can be monitored and configured using PC software or an optional JIKONG home storage display. These options provide alternative ways to view detailed battery information and interact with the BMS.

Image showing options for monitoring: Mobile APP, PC software, and JIKONG home storage display

Figure 11: Monitoring Options (Mobile APP, PC Software, External Display).

Active Balancing

The BMS features active balancing (lossless balancing) which is achieved through energy transfer. This process moves energy from cells with higher energy to cells with lower energy, achieving voltage balance with minimal energy loss. Active balancing operates whenever there is a voltage difference above the set threshold, regardless of whether the battery is charging, discharging, or idle. It works continuously until the voltage difference is within the set range.

Diagram illustrating active balancing, showing energy transfer between battery cells to achieve voltage balance

Figure 12: Active Balancing Principle.

Maintenance

To ensure the long-term reliability and performance of your JIKONG Smart BMS and battery system, consider the following maintenance guidelines:

  • Keep Dry and Clean: Protect the BMS from moisture, dust, and corrosive environments. Regularly clean the exterior with a dry, soft cloth.
  • Check Connections: Periodically inspect all wiring connections (balance leads, main power cables, communication cables) to ensure they are secure and free from corrosion or damage. Loose connections can lead to poor performance or safety hazards.
  • Monitor Parameters: Regularly use the mobile APP or PC software to monitor battery voltage, current, temperature, and cell balance. This helps in early detection of potential issues.
  • Avoid Extreme Temperatures: While the BMS has temperature protection, operating the battery system within its recommended temperature range will prolong its lifespan.
  • Software Updates: Check the manufacturer's website or APP for any available firmware updates for the BMS. Updates can improve performance, add features, or fix bugs.

Troubleshooting

The JIKONG Smart BMS is equipped with various protection mechanisms to safeguard your battery. If you encounter issues, check the following:

  • No Power/No Output:
    • Verify all main power connections (B- and P-) are correctly wired and secure.
    • Check if any protection (e.g., over-discharge, overcurrent, short circuit) has been triggered. The BMS APP or display should indicate the active protection.
    • Ensure the battery pack voltage is within the operational range.
  • Balancing Issues:
    • Confirm all balance leads are correctly connected to each cell and to the BMS.
    • Check individual cell voltages via the APP. If there's a significant discrepancy, the active balancing should engage. Allow time for balancing to occur.
    • Ensure the balance current setting in the APP is appropriate.
  • Overcharge/Over-discharge Protection:
    • The BMS will cut off charge/discharge if cell voltages exceed or fall below set thresholds. Check your charger/load and battery state.
    • Review and adjust the overcharge/over-discharge protection voltage settings in the APP if necessary, ensuring they match your battery chemistry's safe limits.
  • Overcurrent/Short Circuit Protection:
    • If the BMS cuts off due to overcurrent or short circuit, immediately disconnect the load.
    • Inspect your load and wiring for any faults or short circuits.
    • The BMS will typically reset after the fault is cleared, or it may require a manual reset via the APP or by disconnecting/reconnecting the main battery power (briefly).
  • Temperature Protection:
    • If the battery temperature exceeds safe limits, the BMS will activate protection.
    • Ensure proper ventilation for your battery pack and BMS.
    • Check the NTC sensor connection and placement.
  • Bluetooth Connection Issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Make sure the BMS is powered on.
    • Try restarting the APP or your mobile device.
    • Ensure you are within Bluetooth range of the BMS.

User Tips

  • Initial Setup: Always connect the balance leads to the battery cells *before* connecting the main power cables (B- and P-) to the BMS. This prevents potential damage from voltage spikes.
  • Parameter Customization: Take advantage of the adjustable protection parameters via the APP. Customize them to precisely match the specifications and safe operating limits of your specific battery cells.
  • Regular Monitoring: Periodically check the cell voltage differences in the APP. Even with active balancing, large initial imbalances might take time to correct or indicate an issue with a cell.
  • Wiring Quality: Use high-quality, appropriately gauged wires for all connections, especially for the main charge/discharge paths, to minimize resistance and heat generation.

Warranty and Support

For warranty information, technical support, or service inquiries regarding your JIKONG JK-BD6A20S15P Smart BMS, please contact the seller or manufacturer directly. Keep your purchase records, including the order number and date of purchase, as they may be required for warranty claims.

JIKONG is committed to providing high-quality products and customer satisfaction. For the latest information, FAQs, or to download the most recent version of the mobile APP or PC software, please visit the official JIKONG website or contact their customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.