HIRISI S8

Contents

Hirisi S8 Carp Fishing Alarm Set Instruction Manual

Wireless Bite Alarm with 2-Way Remote Control

1. Introduction

Thank you for choosing the Hirisi S8 Carp Fishing Alarm Set. This wireless bite alarm system is designed to enhance your carp fishing experience by providing clear and reliable indication of fish bites. The set includes multiple bite alarms and a remote receiver, allowing you to monitor several rods simultaneously from a distance. With adjustable settings for volume, tone, and sensitivity, along with useful features like a night light and anti-theft function, the Hirisi S8 ensures you won't miss a bite.

2. Components Overview

Your Hirisi S8 Carp Fishing Alarm Set typically includes the following components:

  • Bite Alarms (Model S8-3 includes 3 alarms, S8-4 includes 4 alarms)
  • Wireless Receiver
  • Protective Zipped PU Case
Hirisi S8 Fishing Alarm Set in a protective case
Figure 2.1: Hirisi S8 Fishing Alarm Set in its protective case.
Hirisi S8 Bite Alarm and Receiver with battery type indications
Figure 2.2: Bite Alarm and Receiver with battery requirements.

3. Setup Instructions

  1. Battery Installation:
    • Bite Alarms: Each bite alarm requires 1 x 9V battery (not included). Open the battery compartment on the back of the alarm and insert the battery, ensuring correct polarity.
    • Receiver: The wireless receiver requires 3 x AAA batteries (not included). Open the battery compartment and insert the batteries, observing correct polarity.
  2. Mounting the Bite Alarms:
    • Screw each bite alarm onto your rod pod or bank stick. Ensure it is securely fastened and stable.
    • Place your fishing rod onto the bite alarm's cradle. The fishing line should pass over the roller wheel.
  3. Connecting Illuminated Swingers (Optional):
    • Each bite alarm features an additional jack for connecting an illuminated swinger. Plug the swinger into the jack for enhanced visual indication.
  4. Pairing (if necessary):
    • If your bite alarms and receiver do not match or lose connection, they can be linked. Refer to the 'Troubleshooting' section for detailed pairing instructions.
Hirisi S8 Bite Alarms mounted on fishing rods by a lake
Figure 3.1: Bite Alarms securely mounted on fishing rods.
Detailed view of the Hirisi S8 Bite Alarm's bottom screw thread and jack for illuminated swinger
Figure 3.2: Bottom view of the bite alarm showing the screw thread and swinger jack.

4. Operating Instructions

4.1 Bite Alarms

  1. Power On/Off: Long press the 'Function' button (Long Press on/off) on the bite alarm to turn it on or off.
  2. Adjusting Volume (V), Tone (T), Sensitivity (S): Use the corresponding rotary knobs (V, T, S) on the bite alarm to adjust the desired level.
  3. Bite Indication: When a fish takes the bait, the fishing line moving over the roller wheel will trigger an audible alarm and illuminate the LED indicators. The LEDs will show both line drop and return.
  4. Night Light: The bite alarms feature a night light function. This can be turned on or off as needed.
  5. Anti-Theft Function: The system includes an anti-theft warning that activates if a fishing rod is picked up from the alarm.
Close-up of the Hirisi S8 Bite Alarm controls (Volume, Tone, Sensitivity, Function button)
Figure 4.1: Bite Alarm controls.
Close-up of the Hirisi S8 Bite Alarms showing LED indicators for run and drop
Figure 4.2: LED indicators for line run and drop.

4.2 Wireless Receiver

  1. Power On/Off: Use the designated power button on the receiver to turn it on or off.
  2. Adjusting Volume (V), Tone (T), Vibration: The receiver allows you to adjust its volume, tone, and activate a vibration mode for discreet alerts. Use the corresponding buttons/switches.
  3. Remote Control Function: Press the buttons on the receiver to remotely control the fishing alarms. This allows you to adjust their volume, tone, sensitivity, night light, and anti-theft function directly from the receiver.
  4. Signal Memory LED: The receiver's signal memory LED will remain lit for 20 seconds after a bite, allowing you to identify which alarm was triggered.
Hirisi S8 Receiver showing controls for Volume, Tone, Sensitivity, Night Light, and Anti-theft function
Figure 4.3: Wireless Receiver controls.
Fishing rods with Hirisi S8 Bite Alarms and illuminated swingers attached
Figure 4.4: Alarms in use with illuminated swingers.

Video 4.1: Demonstration of the Hirisi S8 Carp Fishing Alarm Set features and operation.

5. Maintenance

  • Cleaning: Wipe the alarms and receiver with a soft, damp cloth after each use. Do not use harsh chemicals or abrasive materials.
  • Water Resistance: The units are waterproof for rain, but avoid submerging them in water.
  • Battery Replacement: Replace batteries promptly when the indicators show low power or when performance degrades. Always use fresh batteries of the correct type (9V for alarms, AAA for receiver). Remove batteries during long periods of storage to prevent leakage.
  • Storage: Store the set in its protective zipped PU case in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • No Signal/Connection Issues:
    • Ensure both the bite alarms and receiver have fresh batteries and are powered on.
    • Check that the units are within the specified wireless transmission range (>150 meters). Obstacles can reduce range.
    • If the bite alarm and receiver do not match each other, they can be re-linked. Consult the full manual (if available) or contact customer support for specific pairing instructions.
  • Alarm Not Triggering:
    • Verify the fishing line is correctly placed over the roller wheel.
    • Adjust the sensitivity (S) setting on the bite alarm. Increase sensitivity for lighter bites.
  • Weak or Distorted Sound:
    • Check battery levels in both the alarm and receiver.
    • Ensure the speaker is not obstructed.

7. Specifications

FeatureSpecification
ModelS8 (S8-3, S8-4 variants)
MaterialABS
TypeFish Bell/Alarm
Water ResistanceWaterproof for rain
Wireless Range>150 meters
Bite Alarm Battery1 x 9V battery (not included)
Receiver Battery3 x AAA batteries (not included)
Signal Memory LED20 seconds
Package Dimensions (approx.)Length: 45 cm, Width: 35 cm, Height: 7 cm
Package Weight (approx.)0.91 kg

8. User Tips

  • Battery Check: Always ensure you have fresh batteries before heading out for a fishing trip. Low batteries can lead to unreliable performance.
  • Proper Mounting: Ensure the bite alarms are securely mounted on your rod pod or bank sticks. They are designed to detect line movement, not to clamp onto the rod itself.
  • Rain Protection: While the alarms are waterproof for rain, it's good practice to protect them from heavy downpours or prolonged exposure to moisture when possible to extend their lifespan.
  • Range Awareness: Be mindful of the wireless range, especially in areas with dense vegetation or other obstructions that might interfere with the signal.

9. Warranty and Support

For warranty information, technical support, or any questions regarding your Hirisi S8 Carp Fishing Alarm Set, please refer to the official Hirisi website or contact the retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.