Menvix BC-1935

Contents

Menvix Modern LED Chandelier Instruction Manual

Model: BC-1935

Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Menvix Modern LED Chandelier. Designed for decorative indoor lighting, this fixture complies with all relevant lighting safety standards. Please read this manual thoroughly before installation and use.

Safety Warnings

  • Installation must be performed by a licensed electrician.
  • Always turn off the main power supply and verify it is disconnected before any installation, maintenance, or cleaning.
  • Securely mount the fixture to the ceiling. Do not exceed the ceiling's load-bearing capacity.
  • Maintain a minimum clearance of 0.5 meters (1.6 feet) between the fixture and any flammable materials.
  • Keep children away from heated components.
  • Immediately disconnect power if you observe abnormal noises, smoke, or flickering from the fixture.
  • Do not overload the electrical circuit.
  • Insulate all wire connections properly to prevent short circuits and ensure no exposed conductors.

Package Contents

Please check that all components are present and undamaged:

  • LED Chandelier Fixture
  • Mounting Bracket
  • Expansion Screws
  • User Manual (PDF available online, see Warranty/Support section)

Specifications

FeatureDescription
Brand NameMenvix
Model NumberBC-1935
Item TypeCeiling Lights
StyleArt Deco
MaterialMetal (Iron)
FinishIron, Spent Grinding Technics
Light SourceLED Bulbs (LED Chip)
Bulbs IncludedYes
DimmableYes (Brightness Dimmable option)
VoltageAC 90-260V (AC160-260V recommended, AC80-240V also supported)
Power SourceAC
Installation MethodSelf-contained, Surface Mounted, Suspended
Number of Light Sources2
Luminous Flux2000-82000 lm
Application AreaKitchen, Dining Room, Bedroom, Foyer, Study, Bathroom
Lighting Area5-10 square meters (40cm model: 6-12m², 50cm model: 8-14m²)
Switch TypeTouch On/Off Switch (may refer to dimming functionality)
Smart DeviceNo
High-concerned chemicalNone
Includes PCBAYes
CertificationCCC, CQC, ROHS
Warranty3 years
Package Dimensions55cm (L) x 55cm (W) x 15cm (H)
Package Weight3.5 kg
Available SizesL400mm (Diameter 40cm, Height 10cm, 36W)
L500mm (Diameter 50cm, Height 10cm, 48W)

Setup (Installation Instructions)

Important: Installation should only be performed by a licensed electrician.

  1. Prepare for Installation:
    • Turn off the main power supply at the circuit breaker and verify that the power is disconnected.
    • Identify a suitable ceiling mounting location, avoiding areas near ventilation ducts or concealed wiring.
  2. Mount the Bracket:
    • Secure the mounting bracket to the ceiling junction box using the provided expansion screws.
  3. Wiring Specifications:
    • Live wire: Red
    • Neutral wire: Blue (or White)
  4. Connect Wires:
    • Connect the power cord of the chandelier to the live wire of the ceiling.
    • Connect the blue wire from the chandelier to the neutral wire (white) of the ceiling.
    Internal wiring of the LED chandelier showing connections
    Internal wiring of the LED chandelier, showing the LED driver and connection points.
    Close-up of the LED driver and wiring connections
    Close-up of the LED driver and wiring connections.
  5. Insulate Connections:
    • Insulate all wire connections with electrical tape. Ensure no exposed conductors.
  6. Mount the Fixture:
    • Align the fixture with the bracket slot and rotate clockwise to lock it securely.
    • Adjust the length of the suspension wire (if applicable), trim any excess wires with pliers, and ensure the desired length is maintained.
    Placing the diffuser onto the LED chandelier
    Placing the diffuser onto the LED chandelier after wiring.

Operating Instructions

Your Menvix LED Chandelier offers various lighting options:

  • Cold Light / Warm Light: These versions provide a fixed color temperature and do not include a remote control.
  • Changeable Light: This version allows you to switch between different light temperatures (e.g., cold, warm, neutral) by toggling your wall switch off and on. No remote control is included.
  • Brightness Dimmable: This advanced version comes with a remote control, allowing you to adjust both the brightness and color temperature of the light to your preference.
Video demonstrating the Menvix LED Chandelier's lighting effects and color options.

Maintenance

  1. Always power off the fixture before cleaning.
  2. Wipe the fixture with a dry, non-abrasive cloth. Avoid using chemical cleaners, as they may damage the finish.
  3. Replace light sources only after they have cooled down to room temperature.
  4. Inspect and ensure terminal tightness every 6 months to prevent loose connections.

Troubleshooting

SymptomPossible CauseSolution
No illuminationPower off / Faulty bulbCheck circuit breaker / Replace bulb
FlickeringVoltage fluctuations / Loose wiringContact utility provider / Re-secure connections

User Tips

  • The 40cm model provides ample brightness for a 10m² kitchen.
  • For 'Changeable Light' models, cycle through light temperatures by quickly turning the wall switch off and on.
  • Installation is generally straightforward, but professional assistance is recommended for safety.
  • The 'Brightness Dimmable' option with remote control offers great flexibility for setting the perfect ambiance.

Warranty & Support

This Menvix LED Chandelier comes with a 3-year warranty from the date of purchase.

For further assistance or to view the full user manual in PDF format, please refer to the official product page or contact Menvix customer support. The PDF manual can be found at: User Manual (PDF)

Eco-Friendly Disposal: Please dispose of this product according to local e-waste regulations. Do not mix with household waste.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.